Instructions:

1. Backup both folders:
	c:\VRWALL on pixelprocessor
	c:\3DInsightGmbH on Tablet PC

2. On Pixelprocessor:
	- Expand the 7Zip file to a temp. folder
	- run amd_cleanup utility from drivers subfolder
	- wait until the "completed" message appears
	- uninstall "Vision" software from control panel - software
	
3. check if a SWAP file (temp. storage) of >2GB is set in windows 
	- reboot 

4. install 13.251.1-whql-x32x64-167361 driver
	- select custom installation option, select Next
	- deselect "HDMI Audio Driver"
		   "Hydravision", 
		   "AMD accelerated video transcoding"
		   "AMD drag an drop transcoding"
		   "AMD Media Foundation trancoders"
	- install remaining components

5. reboot

6. start catalyst control center
	- in "FirePRO 3D settings" enable "Quad Buffered Stereo"
	- in "3D Application settings" set "Wait for vertical refresh" to "ALWAYS ON"

7. remove shortcut to "VRwall.bat" from startup group, reboot, check setting of prev. step

8. create and arrange Display Group (2x2), 2560x1600 Pixels @ 120Hz

9. install Vision_v751 drivers
	- check "always trust software from datapath ltd"
	- leave all options untouched, proceed.
	- when finished, shut down pixelprocessor AND POWER OFF!!!!!

10. wait 1 minute and restart PP

11. rename c:\VRWALL to c:\VRwall.old

12. move new VRWALL directory from temp. folder to c:\

13. Place shortcuts to vrwall.bat and vrwallon.bat on desktop, shortcut to vrwallon.bat to startup folder too

14. start vrwall.bat from desktop

---

15. on tablet:
- copy 3Dinsight folder to c:\
- place shortcut to c:\3dinsight\wallmanager\autocalib.exe on desktop
- start autocalib.exe

16. check system, calibrate using DSLR camera, check every media setting, check out picture viewer and
new image modes (dynamic, stereo buttons).




