$ (c) XEOMETRIC
10 Invalid codeword!
17 Text does not fit! Where to? (ENTER = unchanged)
18 No storage space available!
19 Point is outside of allowable range
20 K##do not translate
21 Position where to?
22 Scale factor?
23 Scale factor 0 not allowed!
24 Rotation angle ( 0 = by point entry)
25 Start position (click point)!
26 End direction (click point)!
27 Execution mode?
28 Move which point? or enter selection
29 Move which point?
30 Scale by which point? or enter selection.
32 Angle of the symmetry axis? or enter selection
33 Point on symmetry axis?
34 Angle of the symmetry axis?
35 Please click 2. point of rotation axis
36 Invalid axis
37 Please enter rotation angle
38 Angle?
39 How often?
40 Are you sure?
41 New position for point?
42 Move which lines as well?
43 No element found!
55 nm
56 ym
57 mm
58 cm
59 m ## don\'t remove trailing blank
60 km
61 in
62 ft
63 Which contour?
66 Calculate area
67 Area              A     =
68 Circumference     P     =
69 Centre of gravity
70                   Cpt.y =
75       Circumference calculation
76 Area calculation not possible!
77 C A L C U L A T I N G  M O M E N T
79 Static Moment
81 Static Moment Hy        =
83 Moment of inertia
85 Moment of inertia  Iy   =
87 Moment of inertia  Ixy  =
89 inertia mom. Cpt   In   =
91 inertia mom. Cpt   Ic   =
93 inertia mom. Cpt   Inc  =
95 Distortion angle   Phi
97 Main mom. of inertia 1
99 Main mom. of inertia 2
100 Resistance moments
102 related to axis n-n
104                       Wnmax =
106 related to axis c-c
108                       Wcmax =
110 related to axis 1-1
112                       W1max =
114 related to axis 2-2
116                       W2max =
125 Contour open!
126 Calculation of moments not possible!
127 Start arrow first!
130 Position of indicator arrow? (2x = End)
131 No text balloon available!
132 Delete which indicator arrow?
133 No indicator arrow available!
134 Error in attribute file (Line %d)
135 File cannot be created!
136 LCR
137 IRSN
139 N R 5 0 Number
140 Attribute name? (#N,#G,#C,#L for classification), ENTER = end
142 T L 20 0 Group              
144 T L 20 0 Class              
145 Level
146 T L 20 0 Level               
147 T L 20 0 Name                
148 Attribute name not in active attribute group!
149 Please select active attribute group first!
150 Attribute group?
151 Attributes
154 %s is a directory!
155 Attribute group %s loaded!
157 %s is not an attribute file!
158 Attribute name?, ENTER = end
159 Value for attribute %s?
160 Invalid attribute value %s
161 Make selection! ENTER = end
162 Delete which attribute? ENTER = all
163 Attribute not available!
164 No attribute value with this name!
165 Delete which attribute? ENTER = end
166 A T T R I B U T E S  L I S T
168 Load library part
169 Load symbol
170 Radius?
171 Null radius ignored!
172 Point on circle?
173 Circle impossible!
174 Points are identical!
175 Point outside of allowable range!
176 Only auxiliary-circle or circle segment possible.
177 Points are on one line!
178 Centre point?
179 Radius[,reference point]
180 Invalid reference point
181 Position of circle
182 Tangential to which element
183 Model Id %X re-organized: %s
184 Data structure clean
187 Delete which auxiliary-line?
188 No auxiliary-line found!
189 Delete which auxiliary-circle?
190 No auxiliary-circle found!
191 Delete which element?
192 Element not found
193 No last auxiliary-geoemetry available!
194 Delete all auxiliary-geometry - click again!
195 Delete which polygon?
196 Digi free - End: [ESC]-key
197 Digi free - End: Pause-key
198 Digi poly - End: [ESC]-key
199 Digi poly - End: Pause-key
200 Necessary point on arc?
201 No circle found!
202 Null dimensioning ignored!
203 Dimension text?
204 Tolerance text?
205 Upper tolerance text?
206 Lower tolerance text?
207 Upper tolerance value?
208 Lower tolerance value?
209 1. point of dimension?
210 2. point of dimension?
211 Position of dimension?
212 Invalid text
213 Text does not fit! Reference point (0-9)?
216 or <place dimension line>
217 1. point for dimension line?
218 2. point for dimension line?
219 Text position or [ENTER]?
220 Line - to which dimension chain must be parallel?
221 Reference point?
222 point to measure?
223 Impossible dimension position!
224 Circle for dimensioning?
225 Position of text?
226 1. dimension line?
227 2. dimension line?
229 Lines parallel!
230 Arc for radius dimensioning?
231 Delete which dimension (point in text)?
232 Text is not a dimension text!
233 No dimension available!
234 Copy parameters of which dimension?
235 Modify parameters of which dimension?
236 No text available
240 Values not allowed!
242 ??
243 Point entry cannot be a space
244 Arc outside allowable range!
245 Previous point is not on the circle
246 Start line where?
247 End line where?
252 %s has been saved!
253 Save drawing
254 Error during save!
255 OK
256 Chamfer distance (0 : alter chamfer)?
257 Chamfer not possible
258 Chamfer angle (0 : Symmetric)?
260 New distance (0 : reconstruct corner, -1 : previous value)?
261 New chamfer angle ( 0 : symmetric, -1 : previous angle )?
262 Fillet radius (0 : modify fillet  < 0: notch
263 Fillet not possible!
264 New radius ( 0: reconstruct corner)
265 Name of macro file
268 Name of the list definitions file?
270 File %s not found!
271 Which element in active model should be split?
272 Division point?
273 Cross hair too far away -> division not possible!
274 Indicate elements to join
275 Modify element: Pen(%d..%d),Line type(%d..%d)?
276 Pen not allowed!
277 Line type not allowed!
278 Modify which element?
279 Set element for pen/line type?
282 Name?
283 Name which element?
284 Start of arc?
285 Point on arc?
286 End of arc?
287 Angle not allowed!
289 Circle point and centre point identical!
290 Resolution? (min. 3, for ellipse, even numbers only)
291 Length of main axis? (0 = input of 3 points)
292 Startpoint of axis?
293 Endpoint of axis?
294 Point on ellipse?
295 Length of secondary axis?
296 Inclination angle of ellipse?
297 Centre of ellipse?
298 Invalid function combination
299 Reference point of deletion model?
300 Select models to replace!
301 Reference point of replacement model?
302 Make selection, which models should be copied!
303 Auxiliary-geometry at which point?
304 1. point on the line?
305 2. point on the line?
306 Point on line?
307 Tangential to which circle?
308 Tangent impossible!
309 Circles have same centre!
310 Circles are intersecting!
312 Display image
314 Perpendicular to which line?
315 No line found!
316 Point is on a line!
317 Line impossible!
318 Click contour!
319 Macro
320 Macro definition %s started
321 Error when opening macro file
322 No write access to file
323 No direct macro calls from within a macro
324 List which variables
325 Delete which variables
326 L
327 Displayed model is now active
328 Invalid entry!
329 Delete all?
330 Of which model
331 Join %d models?
332 Copy %d models to active model?
333 Cancel
334 Name for buffer/import filter?
335 No further buffer/import filters possible
336 No buffer/import filter with %s name
337 Buffer/import filter was deleted
338 Enter model name, group, class, level?
339 Modify which pen, line type?
340 New pen, line type?
341 -1:Delete, 0:Off, 1:On, 2:Element, 3:Model, 4:Parameter
342 Mono(0/1), Pen, Brighten(0/1)
344 Enter pen numbers.(-1 = all, ^Pen[, Pen...] = inverse)
345 Enter line type numbers. -1=all, ^Lt[, Lt...] = inverse)
346 Start of measurement?
347 End of measurement?
351 Line, of which the angle must be measured?
352 1. line of angle?
353 2. line of angle?
355 Point?
356 Element?
358 Line: Cos=%f  Sin=%f  Length=%f
359 Line: Cos=%f  Sin=%f  Rho=%f
360   Name : %s
361 No %s with %s name!
363 Work plane
364 No attribute with this name!
365 Name of attribute (ENTER = end)?
366 Value of attribute %s ( ENTER = all values)?
373 Names for %s : ENTER = end
374 Select class. ENTER = active class
375 Select level. ENTER = active level
376 Select model. ENTER = active model
377 Select group. ENTER = active group
378 Select work plane ENTER = active plane
379 Illegal operation!
380 Select models! ENTER = end of selection
381 Select contour for block model!
382 All selected!
383 All selected. ATTENTION! PARTIAL IMAGE DISPLAY ONLY !
384 Image selected!
385 Error in Block or Section
388 Enter absolute parallel distances
389 Parallel to which element
390 Double auxiliary-line ignored!
391 Enter relative parallel distances
392 Invalid number
393 Distance of parallel contour?
395 New model
396 No model found
397 Information of model:
398 Main object,   part-objects %d, total %d.\n
399 Parent-object, part-objects %d, total %d.\n
400 Part-object.\n
401 Transfer which element to active model?
402 Copy which element into active model?
403 Element already part of active model!
404 Transfer which supplementary elements into active model?
405 Copy which supplementary elements into active model?
406 Supplementary element already part of active model!
407 supplementary elements not found!
409 Plotting of drawings
414 %s can not be found!
415 Enter start point of rectangle!
416 Diagonal point of rectangle?
417 Width [,height,reference point,angle]
418 Position of rectangle?
422 Delete which segment?
423 No segment found!
424 Pen(%d..%d) [,Linetype(%d..%d)] for segment modification?
425 Modify which segment?
426 Pen(%d..%d) [,Linetype(%d..%d)]
427 Colour mode 1:Mono,2:M,3:G,4:K,5:E,6:pen,7:printer,8:copy,9:layer
430 Arrow display is off, only temporary depiction!
431 Arrow display on
432 Arrow display off
434 Dimension display OFF, temporary depiction only!
435 Dimension display on
436 Dimension display off
438 Hatch display OFF, temporary depiction only!
439 Hatch display on
440 Hatch display off
442 Text display OFF, temporary depiction only!
443 Text display on
444 Text display off
446 Supplementary elements display OFF, temporary depiction only!
447 Supplementary elements ON, temporary depiction only!
449 Arrow
450 Dimension
451 Hatch
452 Text
453 OFF, temporary imaging only!##trailing text
455 Branch at pnt:0 , T-fork:1 , Section point:2
456 On: 1=screen,2=printer,3=file,4=spooler,5=pipe (printer must be turned on!)
459 Grid switched off!
461 Grid switched on!
467 Angle units (0=Radian, 1=degree, 2=Gon)?
468 New group started!
469 Model tracking on
470 Model tracking off
476 Grid not switched on!
477 Follow which element
478 No element or auxiliary-geometry found!
479 Move where to?
480 Attach to which element?
481 Distance from point?
482 Next point is not on element!
483 Resolution? (1 - 10)
484 Spline through which contour?
485 Inclination angle start point?
486 Inclination angle end point?
487 Spline type? (0 = cubic spline, 1 = polynom)
488 from, to, accuracy?
489 A,B,C,D?
492 Parts of drawing are switched off!
493 Contour of library part
494 Filename contains illegal characters!
495 Load drawing
496 Should the active drawing be saved?
497 YES
498 NO
500 Incompatible binary drawing
501 Invalid file format!
502 Error during loading!
505 Contour security switched ON
506 Contour security switched OFF
507 Application object will lose properties in 3D stretching!\nStretch anyway?
508 Point on contour line?
509 Stretch which line? or enter selection.
510 New length of line (was %s)?
511 One point of stretched line must be within the block!
512 Only one point of the stretched line can be within the block!
527 %s being terminated.
528 Enter text:
529 Place at which line/arc?
530 Name of text file?
532 Text limits out of valid range!
533 Copy which text?
534 Text is a dimension text!
535 Move which text?
536 Text to delete?
537 Modify which text?
538 Modify text!
539 Enter additional line!
542 Select text
543 Which text in balloon?
544 Text balloon already active!
545 Delete which balloon?
546 Which text for setting parameters?
547 Modify parameters of which text?
548 Recalculate text size  (1..active model, 2..all)
549 Nothing left to UNDO
550 Nothing left to REDO
551 Units 1)nm 2)ym 3)mm 4)cm 5)m 6)km 7)in 8)ft 100)USER
552 How many mm in your unit?
553 Invalid selection!
555 Invalid value! Please re-enter.
556 Reference point? (ENTER for centre page)
557 Scale?
558 Scale not possible!
559 X-distance,Y-distance,angle,type(0:Standard,1:ISO)
560 Top view
561 Front view
562 Side view left
563 Isometric view
564 Bottom view
565 Rear view
566 Side view right
567 Distance section planes before, behind view; switch [f,b,l,r,t,d]?
568 Design model view
571 ATTENTION: Refresh plot?
572 Save view not possible
573 Error in mask initialisation
574 Delete %s view?
575 remove which view
576 select view
577 modify which view
578 Benchmark: Number of rotations?
579 Click double line start (on existing line for joining)
580 Click next corner point (2x to end)
581 No line available -> Starting new double line!
583 Gauge, open(0:not,1:begin,2:begin&end,3:end),centred(0,1)
584 Left lower point of zoom rectangle?
585 Upper right point of zoom rectangle
594 Zoom in which window?
595 Work copy in block/section not possible
596 woco
597 Automatic work copy is being saved
598 Automatic work copy saved!
599 CAD session terminated! Work copy was saved
600 Work copy has been saved!
601 Drawing will be deleted when work copy is loaded! Load?
602 No work copy available!
603 Incompatible work copy
604 Load work copy
605 Invalid drawing name!
614 Coordinates are identical. Please reenter.
615 Zoom factor too large!
616 Zoom outside of drawing area!
617 Number for range
618 Invalid value: 1-9
619 Zoom factor [,reference point]
620 Zoom factor too large!
627 Could not activate window
632 Double auxiliary-circle ignored!
635 Elements do not form corner!
636 Elements do not form chamfer!
637 Elements do not form fillet!
642 Zoom step not possible!
659 Invalid attribute value.
660 First polygon point?
661 Next point of polygon, close polygon
662 Start point for arc
663 Point on arc
664 Endpoint for arc
665 Error: Startpoint = Endpoint
666 Aborted during contour search
667 Error while searching contour
668 Start element?
669 End point?
670 Select model
671 Cancel
672 Dialog window
673 Y
674 N
675 File
676 OVERWRITE current file?
682 Attribute %s: value {%s} modified to {%s}
683 Attribute %s, Format {%s} ignored
684 No read access to this file
685 No such file
687 Could not start overlay
688 has ended
689 Macro definition ended
691 Reminder: SAVE WORK COPY!
698 Syntax error in macro \'%s\', line %s, level %s
699 Invalid nesting in macro \'%s\',line %s, level %s
700 Macro \'%s\' in line %s, level %s cancelled!
701 Text for query [@{Variable[=Expression]}]
702 Invalid format - again please
703 Query text for point entry? (after positioning  \',\'  required)
704 Pause for entry inserted
705 Pause for function inserted
707 Invalid function number : %d
708 No element found
709 Element not in image
710 No point found
711 Elements and auxiliary-geometry not in image
712 Auxiliary-geometry not in image
713 No section point found
714 No auxiliary-geometry section point found
715 No circle found
716 No element or auxiliary-geometry found
717 Point is inside of the circle
718 Invalid snap mode
721 List generator
726 A00
727 A0 ##do not delete trailing blanks
728 A1 ##do not delete trailing blanks
729 A2 ##do not delete trailing blanks
730 A3 ##do not delete trailing blanks
731 A4 ##do not delete trailing blanks
732 A5 ##do not delete trailing blanks
733 DR##abbreviation for Drawing, English: draw
734 MO##abbreviation for Move, English: move
735 EL##abbreviation for Element
736 GEO##abbreviation for auxiliary-geometry
753 Act.M
755 Class
756 Group
757 Model
758 Image
759 Buffer/import filter
760 Attr.
761 Bl.M
762 Sect
763 Block
766 Work lev
768 COPIES
769 FILTER
771 Lib. part %s does not exist!
793 Load mode: (0: as saved, 1: relative, 2: absolute)
794 Load mode: (1: relative. 2: absolute
795 Save reference point for drawing? (ENTER = active)
796 1. Reference point for saving library part (ENTER = active)
797 2. Reference point for saving library part (ENTER = no further reference point)
798 3. Reference point for saving library part (ENTER = no further reference point)
799 Enter producers name
800 Enter production department:
801 Enter description
802 Enter catchwords
825 File write protected!
826 No more storage space available!
827 Invalid type combination
828 Attribute value invalid
829 No format for attribute name
830 Undefined variable %s
831 Division by 0
832 syntax error at pos. %d
833 Invalid format on point entry
834 Calculation overflow
836 Unknown function \'%s\'
837 Invalid parameter type (%s)
838 Argument out of admissible range (%s)
839 No assignment to constant %s
840 Too many databases used
841 No such database
842 Key not found
843 Read error
845 Copy to file %s not possible. \n check authorisation.
846 Load file
847 File %s could not be deleted. \n Delete manually
848 New drawing
849 unnamed.d
850 4 Views
852 VRML 2.0 File
853 Select by selection expression?
854 Design model
855 Plot view
856 %d congruent models found!
857 Which contour should be hatched?
860 Which hatch element to active model?
861 ATTENTION: Original hatch still available!
862 No hatch found
863 Delete which hatch?
864 Copy which hatch parameter?
865 Modify which hatch parameter?
866 To which line should this auxiliary-line be parallel!
867 Dimension line and dimension auxiliary-line parallel!
868 Dimension out of page range!
869 To which dimension tolerance text?
870 Dimension to old!
871 Tolerance dimensioning is switched on!
872 Tolerance dimensioning is switched off!
873 Diameter dimensioning ON
874 Diameter dimensioning OFF
875 M,Cm/mm dimensioning switched on
876 M,Cm/mm dimensioning switched off
877 Move which dimension?
878 Where to?
879 This dimension type can not be moved!
880 Trim which dimension point?
881 Trim where to?
882 Dimension part cannot be trimmed!
883 No dimension line available!
884 %s can not be loaded
887 3D drawing mode active
888 Drawing in work plane only
889 No 2D element found!
890 Terminate CAD session
891 Pen: %d  Line type: %d
892 First POLYGON point?
895 Objects
896 Pick object! ENTER = end object selection.
897 Select object. ENTER = active object
898 Select level. ENTER = end
899 Select model. ENTER = end
900 Select object. ENTER = end
901 Select group. ENTER = end
902 Select class. ENTER = end
903 Select work plane. ENTER = end
905 no printer installed!
906 Local file copy
907 Local file being loaded
908 Local file being closed
909 3D-data calculation
910 Refresh display list
911 Only views of the Plot, Plan, View, Section or Detail - type will be exported!
912 Export view to file
913 Object
914 Convert library parts/symbols
915 Snap 3D-edges as well
916 Only elements and auxiliary-geometry can be captured in the work plane
917 Polygon functions
918 Manipulation functions
919 Block functions
920 Copy mode
921 Rotation angle?
922 Rotate by which point? or enter selection.
924 Modify reference point
927 Load pixel
928 Edit which image?
929 Enter new dimension?
930 Edit image
931 Edit image, ENTER = end
932 load drawing into
933 Position?
934 to startpoint
935 new position
936 ERROR
937 No plot active!
938 No view found!
939 No sub-view found!
940 View is a plot!
941 no name entered!
942 View already available
943 View already available! replace?
944 Design model cannot be deleted!
947 Refresh view?
948 Refresh section?
950 Auxiliary-geometry to delete?
951 Terminate %s?
952 Symbol for section arrow
953 Text parameter <%s> not found!
954 SECTION
956 %s-coordinates for this point
957 Rotation of coordinate system through set angle units.
959 All files
961 JPEG
962 GIF
964 Move active drawing as well?
967 Parameter##singular
968 No %s codeword for %s ID %s! \n Program running in Testmode
969 Dongle driver not installed!
970 NO Dongle in USB port!
974 ATTENTION
975 Views are not saved simultaneously
976 All licences on server in use!
977 Network
978 HIL
979 Processor
980 Dongle
981 Reference plan
982 Supplementary elements scaling on
983 Supplementary elements scaling off
985 Error during access of %s
986 Modified scaling (no scaling will take place!)?
989 Rotate on which point?
990 Rotation angle?
991 Invalid name!
992 Name in use!
993 Name cannot be modified!
996 Brighten active model?
997 LOCKED - file cannot be loaded!
999 User
1000 PC
1001 Time
1003 Can not create lock file! Load as copy
1004 Enter new name because drawing is locked!
1005 Section arrows not found!
1007 TIFF
1008 BMP
1011 Work copy could not be generated!
1012 Can not load file!
1013 No view found!
1014 Work copy could not be found!
1015 Name for view
1016 High quality on
1017 High quality off
1018 edit which bitmap?
1019 Load pixel file
1020 Point outside
1022 place where?
1026 Invalid entry!
1031 no bitmap found!
1032 First point?
1033 Second point?
1034 Marker not valid!
1035 you may only copy within the same bitmap!
1036 User defined back-up copy is being saved
1037 Allocate view
1038 ARCHITECTURE
1039 MECHANICS
1041 Program,Prio.,Number,Argument
1043 Modify radius failed!
1044 Should view be assigned to a plot?
1047 %d points deleted
1048 CAD400
1049 DWG/DXF 2D
1050 IGES 2D
1051 IGES 3D
1053 VDA-FS
1054 SAT
1056 TGF
1057 Select model or [ENTER] for point entry
1058 Put which model in background?
1059 Import colour scheme
1060 Export colour scheme
1061 Detail \'%s\' already available!
1062 2D - Detail \'%s\' already available!
1063 DWG/DXF 3D
1064 -- ATTENTION! - ALL  PEN/LINE TYPE COMBINATIONS TAKEN - ATTENTION! --
1065     PREVIOUSLY SELECTED PEN/LINE COMBINATIONS ONLY!
1066 ELITECAD is already active!
1067 MI
1068 ERROR
1069 Plotting in Education version not possible!
1070 temporary file <%s> cannot be generated!
1071 XEOMETRIC GmbH ELITECAD Education version
1072 resale or other commercial exploitation prohibited!
1073 Student
1075 ATTENTION: New model not visible!
1076 Modify TTF parameter of
1077 Modify TTF parameter to
1078 Please close current window first.
1079 Please wait till program start has completed.
1080 Manufacturer
1081 Graphics card
1082 Path and name for graphics card setting file(.def)
1083 Path and name of manufacturer setting file (.def)
1085 Show complete storey
1086 Visibility as in filter
1087 Storey separation lines being calculated.
1088 %d proprietary objects found in view!
1089 delete
1090 Maintain?
1091 File was created with Education version!
1092 Active drawing could not be copied onto clipboard.\nTry lowering the scaling factor.
1093 Syntax error in line %s, file %s!
1094 Graphics export not allowed!
1095 IFC
1097 Views ignored when loading!
1100 Scale by which point?
1101 Rotate by which point?
1102 Stretch which line?
1103 Single entry
1104 Font
1105 Text size
1106 Multiple entry
1107 Line parameters
1108 Line length
1109 Enter polygon
1111 Entry by centre point
1112 Entry by 3 points
1113 Circle parameters
1118 Circle by centre pnt. and r.
1126 Circle by three points
1127 Hatch type
1128 Start hatch
1129 End hatch
1130 autom. contour search
1131 manual contour entry
1132 Time limited version - expiry date: %s
1133 Time limited version - time till expiry: %d days (%d hours)
1134 Dongle defective or invalid codeword!
1135 Codeword for Dongle has expired!
1136 Your version will expire on: %s
1137 Your version will expire after %d days (%d hours)
1140 No light source selected for shadow!
1141 Delete selection?
1142 Please enter selection [ENTER = active model]
1151 ACTIVE model has no 3D-Definition
1152 Models in IMAGE have no 3D-definitions
1153 Models in SELECTION have no 3D-definitions
1154 ACTIVE model has 3D-definition, but of a different type
1155 Models in IMAGE contain 3D-definitions, but of a different type
1156 Models in SELECTION contain 3D-definitions, but of a different type
1157 Please enter offset for ACTIVE MODEL
1158 Please click model for contour
1159 Please click %1d. contour for source model
1160 Please enter height or click 2. view {0}
1161 2. view may only be a line!
1162 NURBS-curve selected as contour
1163 Please click startpoint for 2. view %1d. click contour
1164 Please click model for path
1165 Please click startpoint for model path
1166 NURBS-curve selected as path
1167 Please click startpoint for path enhancement model
1168 Please click U,V limiting model [ENTER = no limitations]
1169 Please click source model %1d. contour
1170 Please click source model %1d. path
1171 Please click startpoint for model %1d. path
1172 Please click startpoint for 2. view %1d. path
1173 Please click reference model [ENTER = no reference]
1174 Please click start-contour-model
1175 Please click startpoint for start contour model
1176 Please click startpoint for 2. view start contour
1177 Please click target contour model
1178 Please click startpoint for target contour model
1179 Please click startpoint for 2. view target contour
1180 Enhancing elevations:
1181 Model is window, cannot be defined
1182 Model has no drawing elements, cannot be defined
1183 Model has too many drawing elements (circular resolution?)
1184 Model with open polygon, cannot be defined
1185 Please enter colour for surface (m=mask)
1186 Please click model to modify
1187 Type 0=no, 1=parallel, 2=normal, 3=angle, 4=aW90, 5=sym, 6=contour
1188 Please click model
1189 No 3D wire model available
1190 ERROR: Not enough memory! CANCELLED!
1191 already exists, Overwrite?
1192 Saving not possible
1193 saved
1194 Read not possible
1195 Loading ended
1196 Error in special part generation!
1197 Invalid file, ...loading not possible
1198 Lines of freeform surface shape not cennected
1199 2 view curve not possible
1200 TRANS BOX not possible (contour open)
1201 DESIGN BOX not possible (contour open)
1202 3D-definition can not be generated, model:
1203 Line without elements
1204 Line is not in window
1205 Line without startpoint
1206 Line view without common X or Y axis
1207 Can not generate line
1208 Startpoint not on line
1209 Line is not connected
1210 Please click definition A (ENTER = end)
1211 This object?
1212 Please click definition B (ENTER = end)
1213 Active model defined as operator
1214 Operator definition for active model not possible
1215 Calculate A minus B
1216 Calculate intersection of A and B
1217 Calculate union of A and B
1218 Boolean operation calculated.
1219 Boolean operation cancelled!
1220 Modify which Boolean definition?
1221 This definition?
1222 Add definition? (Y/N=remove)
1223 Which definition?
1224 Please enter new pen colour for NORMAL
1225 Invalid pen number
1226 Please select surface
1231 Please enter colour of curve (m for mask)
1232 Please enter fillet radius
1233 Please enter %d. point [ENTER = end]
1234 Points are identical, re-enter
1236 Please enter colour
1237 3D curve definition not possible
1238 Section line calculated
1239 Section line cancelled
1240 Surface section calculated
1241 Surface section cancelled
1242 Volume section calculated
1243 Volume section cancelled
1244 Please click standpoint or [ENTER]
1245 Please enter height of standpoint
1246 Please click point of view point
1247 Please enter height for view point
1248 Projecting wire model in active work plane
1249 Wire model projected
1250 Projection of wire model cancelled
1251 Load light sources
1254 Save light sources
1258 Please click surfaces in 3D-view [ENTER = calculation]
1260 Only one surface was specified!
1261 Generate merge surface
1262 First and second surface have no common border curve
1263 Two of the surfaces have no common border curve!
1264 Merge surfaces cancelled
1265 Please enter tolerance angle (degr) for internal smoothing
1266 3D-definitions are related to ACTIVE MODEL
1267 3D-definitions are related to IMAGE
1268 Please enter offset
1269 Entry not correct!
1270 Please enter angle [degree]
1271 Height
1272 under
1273 upper
1274 Angle:
1275 Start
1276 End
1277 INTERSECTION
1278 UNION
1279 MINUS-OPERATION
1280 Definition skipped
1281 Model has no 3D-definition
1283 Copy?
1284 Arrange which surface? (select surface)
1285 Error at arrangement!
1286 Arrange to which plane? (select surface)
1287 To this surface?
1288 Operation not possible for this object!
1289 Mirror to work plane
1290 Error when mirroring
1291 Please click first point of rotation axis
1296 Error during rotation
1297 Move which point?
1299 Error when moving
1300 Select work-plane-origin by object
1301 Scale-factor in X direction
1302 Scale-factor in Y direction
1303 Scale-factor in Z direction
1304 Fillet radius
1305 Value not allowed!
1306 Chamfer distance?
1307 Chamfer angle (0:Symmetric)?
1308 Trim which surface?
1309 Trim with which surface? (ENTER = end)
1310 Fillet which surface?
1311 Fillet with which surface? (ENTER = end)
1312 Chamfer which surface?
1313 Chamfer with which surface? (ENTER = end)
1314 Section which surface?
1315 Section with which surface? (ENTER = end)
1316 Surface was already selected
1317 Calculate section/fillet...
1318 Section/fillet calculated.
1319 Section/fillet cancelled!
1320 Calculate %d. guide curve (%d)...
1321 guide curves calculated
1322 Error when calculating guide curve!
1323 Please click points on the guide curve [ENTER = calculation]
1324 This point?
1325 Please enter interpolation type 0=point true,1=tangent true,2/3=radius true
1326 Calculate resulting guide curves...
1327 Error when entering point. Try again...
1328 Error when calculating resulting guide curves
1329 Like this?
1330 Invalid radius entry
1331 Please enter %d.point of plane
1332 No model selected
1335 Generate special part with Wire model [0] Hiddenline [1] or Box [2]?
1336 Height for ACTIVE MODEL cannot be modified
1337 Rotation angles cannot be modified for ACTIVE MODEL
1338 Rotation axis cannot be modified for ACTIVE MODEL
1339 Value for ACTIVE MODEL cannot be modified
1340 Please enter rotation angle [-360.0 <-> 360.0]
1341 Min: %d.  Max: %d
1342 ACTIVE MODEL is ONLINE
1343 ACTIVE MDOEL is OFFLINE
1344 Positioning for ACTIVE MODEL cannot be modified
1345 Positioning in view for ACTIVE MODEL not possible
1346 Folding cannot be executed for ACTIVE MODEL
1347 Points are identical
1348 Please select definition to be deleted
1349 Deletion of definition not possible
1350 Points do not build a correct plane
1351 Which surface as limitation?
1352 POLYGON
1353 EXTRUDE
1354 BOX
1355 ROTATION EXTRUDE
1356 ROTATION BOX
1357 SPECIAL PART
1358 2 - VIEWS CURVE
1359 TRANS SURFACE
1360 FORM SURFACE
1361 TRANS BOX
1362 DESIGN SURFACE
1363 2 - VIEWS OBJECT
1364 3 - VIEWS OBJECT
1365 FRAME SURFACES
1366 DESIGN BOX
1367 MERGE SURFACES
1368 OPERATOR DEFINITION
1369 FREE DEFINITION
1370 ACTIVE MODEL
1371 DISPLAYED models
1372 Models of SELECTION
1373 %s defined as %s
1374 3D-definition not possible
1375 Model in active switch setting defined as ORNAMENT
1377 Please enter height for %s
1378 Please enter height %d for %s
1379 ('e' for plane,'f' for surface)
1380 Please click point %d. of rotating axis for %s
1381 3D-definition deleted: type
1382 Please enter start angle [degr] of rotation for %s
1383 Please enter end angle [degr] of rotation for %s
1384 Please enter number for %s
1385 Please enter distance for %s
1386 Please enter colour for %s (m=mask)
1387 Please click %d. point of folding axis for %s
1388 3D-definition %s deleted
1389 Please enter shift in height (Z) for %s
1390 Please enter fold angle [degr] for %s
1391 No 3D-definitions for %s available
1392 3D-definition for %s available, but with a different type
1393 Height for %s modified
1394 Modify heights for %s not possible
1395 Rotation angle for %s has modified
1396 Modify rotation angle for %s not possible
1397 Rotation axis for %s was modified
1398 Modify rotation axis for %s not possible
1399 Number for %s has modified
1400 Modify number for %s not possible
1401 Colour for %s modified
1402 Modify colour for %s not possible
1403 ONLINE-status for %s has changed
1404 ONLINE-status change for %s not possible
1405 Resolution for %s has changed
1406 Resolution change for %s not possible
1407 Positioning for %s has changed
1408 Modify positioning for %s not possible
1409 WARNING: All entries relate to all models in the IMAGE!
1410 Please select definition
1416 Border curves not connected
1417 Contour is not in a plane
1418 Please click path
1419 Please click contour
1420 Please click contour %1d
1421 Please click path %1d
1422 Please click view %1d
1423 Click unfold contour
1424 Invalid object selected
1425 Model already used
1429 This surface?
1430 Please select fillet surfaces only!
1431 Exactly 3 fillet surfaces create a corner!
1432 Calculate corner fillet...
1433 Corner fillet calculated
1434 Corner fillet cancelled!
1436 Please click surface at desired boundary
1438 Please click surface on the inner side
1439 Please enter length
1440 Lengthen surfaces cancelled
1441 Invert surface?
1443 Trim area deleted.
1444 Trimming info not available
1445 OFFLINE-Definition, invert surface not possible!
1446 Trim area inverted
1447 No invert possible in trim area
1452 Please click boundary curve [ENTER = end]
1453 This curve?
1454 Curves are not connected
1456 Surface interior was smoothed!
1457 Buckles are larger than tolerance angle!
1458 Smooth surface cancelled!
1459 Tangential to the first surface?
1460 Calculate surface balancing...
1461 Surface balancing calculated.
1462 No common border curve. Surface balancing ended!
1463 Surface balancing cancelled!
1467 unnamed
1474 Please enter offset
1475 Error
1476 Which model as outline (Select point) / (ENTER = remove outline)
1478 Remove from which surface
1479 Apply onto which surface (select point)?
1480 Error when generating the outline model
1481 Error when deleting the outline model
1483 Can not load TGF-file!
1484 Can not save %s-tag!
1485 Error during TGF export!
1486 TGF file %s has been saved!
1487 Calculate volume......
1488 Calculation cancelled
1490 Search geometry in all work planes
1491 Search geometry in active work planes.
1492 Please enter 1. point (source)
1493 Please enter 2. point (X-axis)
1494 Please enter 3. point (XY plane)
1495 New work plane
1496 Work plane has not changed.
1497 Work plane can not be generated.
1498 Which 3D window?
1499 Please enter 2. point (Z-axis)
1500 Please select origin of the editing surface
1501 Definition not closed!
1502 Object description missing!
1503 Modify model %d
1506 Modified definition %d
1507 General special surfaces (positive + negative) generated
1508 Positive special volume generated
1509 Negative special volume generated
1510 Model %d: %d elements added. Sum: %d\n
1511 faulty surface
1512 Purge model
1513 New approximation: %.2f
1514 Please click left lower corner
1515 Please click upper right corner
1516 Free Window: 3D-view [1], vertical [2] or view [3]?
1517 Please click 1. point for vertical window
1518 Enter height at this location
1519 Please click 2. point for vertical window
1520 Please click standpoint for window-view
1521 Please click point of view for window-view
1522 Please enter rotation angle (degrees) to define X-axis for window-view
1523 Please click window for active 3D-view
1524 Copy window-view into active window [ENTER] or reset [1]?
1525 Please click window
1528 3D Object total or partly out of image range! Terminated!
1530 Please enter old, new colour
1533 Colour has been modified
1534 Modify colour not possible
1539 Please enter height, X-, Y-angle, rel.dist.
1542 Positioning has changed
1543 Modify positioning not possible
1563 Entry not correct! Points form a straight line
1564 ERROR: Not enough MEMORY for pia_com_ptr,  3D not activated
1565 Confirm deletion of 3D data!
1566 3D data have been deleted
1567 Activate Analytic Mode for this function (Y6)!
1580 PHONG SHADING is on, but not useable in SRX mode
1581 PHONG SHADING is on
1582 GOURAUD SHADING is on
1583 Display 3D coordinate lines
1584 Do not show 3D coordinate lines
1585 Analytical design model active
1586 Facetted design model active
1587 Please enter materials index
1591 Windows will be deleted with 3D imaging
1592 Windows will not be deleted with 3D imaging
1593 Windows refreshed
1595 Please enter file name for parameters to save
1597 File name invalid
1599 Please enter 3D file name to be saved
1600 Please enter 3D File name to be loaded
1605 Starting position
1606 Invalid value
1607 New distance between stand-point and origin?
1608 Please enter angle of view (degree) for SRX output
1609 Please enter resolution: 1=normal, 2=half .. pixel amt.
1610 Please enter scaling factor
1611 Please enter scaling factor for X,Y,Z
1613 Protocol file could not be created!
1614 Model contains 3D-definition, Function not useable
1616 Reduction
1617 Model without drawing elements, function not available
1619 ERROR: Not enough MEMORY for image! TERMINATED!
1627 Too many colours in image, Solid executed in DITHER mode
1637 Pen %d: - 1,2,3 / + 4,5,6 | Step: - 7 / + 8 | New: 9
1638 3D Wire model being converted
1639 3D Wire model outside of image range
1640 Section line
1641 Convert 3D wire model in Windows
1642 Remaining polygon:
1643 Data not correct for special volumes!
1644 Calculation running
1645 3D VOLUME
1646  Points
1647 Facets
1648 Parts
1649 3D AREA
1650 New volume in litres [0 = copy current]?
1651 Scaling X:%8.3lf Y:%8.3lf Z:%8.3lf copied
1652 Keep which coordinates: No (0), X, Y, Z?
1653 Incompatible 3D format
1655 ERROR: Not enough MEMORY for loading! TERMINATED!
1665 Save parameters not possible
1667 Buckled surfaces can lead to errors! Fillet anyway?
1668 Definition of views-object not possible: more than one contour open
1669 Can not calculate 2-views object
1673 Analyse which definition?
1674 Company...
1675 Load VDAFS
1678 Save VDAFS
1681 Save sheet file
1682 Sheet file was saved
1683 Error when saving
1684 Please select the base surface
1685 Surface is not planar!
1686 Error occurred!
1687 Select a surface already unfolded!
1688 Surface not yet used!
1689 Please select connecting surface!
1690 Surface was already used!
1691 No common edge found!
1692 2D depiction as projection [0] rectangle [1] or no elements [2] ?
1694 Enter height of the point
1698 Point on line?
1699 Direction of lines?
1700 Section with which surface?
1701 No point was found!
1702 First surface?
1703 Second surface?
1704 Associative? (Y/N)
1705 Please select surface connecting to fillet!
1706 Ambient light
1709 Definition no longer exists
1711 Definition no longer displayed
1713 Inclined
1714 Transition tangential on both surfaces?
1715 Calculate surface connection...
1716 Join surfaces calculated.
1718 CATIA import
1721 CATIA export
1740 STL
1743 Please enter %d. curve [ENTER = end]
1744 Please enter point to manipulate [ENTER = end]
1745 Point must be a corner point
1746 Please enter rounding radius (0 = corner)
1747 Invalid radius value
1748 Corner already available
1751 No further bending possible
1752 Internal error!
1753 Load 3D data
1754 Terrain data loaded successfully
1755 Error when loading the terrain data!
1756 Please click on surfaces in 3D view [ENTER = END]
1757 Selection must be part of definition of choice.
1758 CANCEL
1760 Selection error
1761 Surfaces (connection) already selected.
1763 Definition already active
1764 FILLET SURFACES
1765 ROUNDED EDGES
1766 DRAFT
1767 UNKNOWN TYPE
1769 Surface has colour: %d
1770 List of 3D colours used
1772 New colour (m for mask)
1773 Colour modified at %d definitions.
1774 no definition with colour %d found!
1775 Angle difference is 0
1777 Fillet not possible: Radius may be too large
1778 Selection error. Please retry.
1779 This selection can not be filleted
1781 New fillet with 0 radius not possible.
1783 Side belongs to other style of fillet
1784 ACIS not activated -> function locked.
1785 Fillet at this definition not possible
1786 Draft not possible (angle too large?)
1787 Please select reference surface [ENTER = work plane]
1790 Reference surface has already been selected.
1791 Surface cannot be selected.
1792 Modify angle. (0 -> delete) []?
1795 Drafts not possible in this definition.
1796 Delete not possible
1797 Select surface to delete. [ENTER = end]
1798 Deletion of this definition not possible
1799 Volume is: %.2f\n    %.3f l\n %.3f ml\n
1800 No ACIS Model available
1801 Error at surface with index %d.
1802 Error at edge (or Co-edge) with index %d.
1803 CONTINUE
1804 Check completed.
1805 Please select model!
1806 Model is open
1807 Model is multiple connected
1808 Model is intersecting itself
1809 Please click curve
1810 Division not possible here
1811 Please click 1. curve
1812 Curves have different degrees
1813 Curves are identical
1814 Curves are too far apart
1815 Radius too large for fillet
1816 Invalid value for radius, repeat entry
1817 Radius too large for fillet, repeat entry
1819 Centre of gravity in work plane coordinates:\n X%.2f,Y%.2f,Z%.2f\n##SP=Sun position / WP=Work plane
1820 Centre of gravity in world coordinates:\n  %.2f, %.2f, %.2f\n
1821 Area is:  %.2f\n
1823 Please make selection [ENTER = end]
1825 Error in design model conversion.
1827 Warning: Additional 3D info not available.
1830 Please enter colour and transparency for %s
1831 Note
1832 3D-Object hidden!
1833 2D depiction with rectangle?
1834 3D-definitions can not be generated
1836 Model could not be converted
1837 Error during display
1838 Definition list is empty!\n(3D refresh to fill list)
1839 DRAWING - STATISTIC
1840 DEFINITIONS
1841 SURFACES
1842 OFFLINE
1843 WITHOUT ACIS
1844 Geometry data loaded successfully
1845 Error when loading the geometry data!
1846 Conversion only possible once.\nPlease restart ELITECAD.
1849 3D-Definition can not be generated.
1850 Plot view cannot be modified
1852 Please enter type  0=minus, 1=join, 2=section
1853 Single fillet: radius %.2f. Re-allocate?
1854 Filleting sequence: Radius %.2f. Re-allocate?
1855 Single chamfer with side distance %.2f. Re-allocate?
1856 Chamfer sequence with side distance %.2f. Re-allocate?
1857 Variable single fillet in range [%.2f,%.2f]. Re-allocate?
1858 Variable fillet sequence in range [%.2f,%.2f]. Re-allocate?
1859 Angle rounding with offset %.2f and bulge %.2f. Re-allocate?
1860 Reference surfaces. Re-allocate? [N -> no draft!]
1861 Single surface, %.2f inclined against local z-direction. Re-allocate?
1862 Single surface, %.2f inclined against reference direction. Re-allocate?
1863 Surface sequence, %.2f inclined against local z-direction. Re-allocate?
1864 Surface sequence, %.2f inclined against reference direction. Re-allocate?
1869 Similar selection already available
1876 Please select reference surface
1877 Please select surfaces to tilt
1878 Selection blocked by at least one surface
1879 This (These) surface(s)?
1880 Leave reference surface or work plane as is?
1881 Please select surfaces to tilt [ENTER = end]
1882 Angle of incidence to reference surface normal []?
1883 NUMBER OF OBJECTS
1884 Models in all views
1885 Models in active view
1886 Definitions
1887 Surfaces
1889 No 3D data available.
1890 Warning: Not all data could be copied
1891 Absolute volume calc., because of no- or incomplete ACIS geometry.
1892 Surface colour?
1893 Grid points x - direction
1894 Grid points y - direction
1896 Number of smoothing actions?
1898 Sun
1900 No useable light source found!
1901 Edit plane
1906 /
1910 curvature dependant
1911 uniform
1912 Surface
1913 u:
1914 v:
1915 Border
1916 Angle
1917 Distance
1918 Minimum
1919 Mode
1920 <
1921 >
1923 Apply
1927 Trim/Fillet
1928 Fillet
1929 Trim
1930 Chamfer
1931 Section curve
1932 Variable fillet
1933 Invert
1934 Blend corner
1935 Surfaces
1936 Smooth
1937 Join
1938 Lengthen
1939 Parallel
1940 Outline model
1941 Sections
1942 Extract border curve
1943 Volume
1944 View position
1946 Wire model
1947 Solid design model
1948 Rotate/Move
1950 2-view curve
1953 Unfolding
1954 Trans surface
1955 Design surface
1956 Free form
1957 Trans box
1958 Design box
1959 Extrude
1960 Rotation extrude
1961 Box
1962 Rotation Box
1966 Surface general
1967 Trimming
1971 Draw## Line
1972 Line
1973 Circles
1974 Double line
1975 Ellipse
1976 Rectangle
1978 Parallel contour
1980 Classification
1981 Elements
1982 Fillet
1985 Parameters##plural
1989 Lengthen surface
1994 Properties
1998 Perspective
2004 Solid design model
2012 Save
2018 Plot/print
2020 Define plot
2022 Exit
2023 Load...
2026 Text
2029 Arrows
2030 DIN-Format
2031 Graphics
2032 Help
2037 Display
2038 Filter
2039 System
2040 System window
2041 Performance
2042 Info
2057 Interfaces
2059 1 ____
2060 2 ----
2061 3 .........
2062 4 - - -
2063 5 __ __
2064 6 _._._
2065 7 __.__
2066 8 __-__
2067 9 __..__
2068 Move selection
2069 Copy selection
2070 Join selection
2071 Rotate selection
2072 Mirror selection
2073 Scale selection
2083 Flange
2084 Result
2096 Contour search
2099 Snap mode Freehand
2100 Snap mode Point
2101 Section point
2102 Auto snap
2103 Normal to Element
2105 Middle of element
2106 Snap Centre Circle
2107 Auxiliary-geometry section point
2108 keep horizontal
2109 keep vertical
2110 keep orthogonal
2111 Middle of 2 points
2113 Centre edge
2114 Centre surface
2116 3D Axis
2117 Light
2118 Edges
2119 Textures
2120 Background colour
2123 Clipping
2136 Search...
2140 Zoom
2142 Status
2144 Global
2145 Info window
2151 Visualisation
2157 3D Delete
2158 Edit
2159 Settings
2161 Monitor
2163 Manipulate
2164 Options
2172 Window##GUI
2173 Record
2174 New
2175 Search
2176 Delete
2179 Content
2180 Lay-out
2182 UNDO
2183 REDO
2184 Close polygon
2185 Close hatch
2186   M
2187   G
2188   C
2189   L
2191 in image
2192 Block model
2193 Block
2194 Section
2197 Arrow parameters
2198 Parameter name
2199 Pen
2200 Line type
2201 Arrow type
2202 no
2204 Circle
2205 Stroke
2206 Arrow length
2207 Arrow width
2208 Circle radius
2209 Stroke length
2210 Stroke angle
2211 All
2215 Place
2216 absolute
2218 relative
2224 Boolean operation
2225 associative
2226 Section
2227 Union
2228 A minus B
2229 dummy
2231 Reference point
2232 Character set
2233 Text angle (-90360)
2234 Text slant (-6060)
2235 Line spacing (1.02.5)
2236 Drawing distance (1.02.5)
2237 Height (0.011000 mm)
2238 Width (01000mm)
2239 Frame
2240 Frame type
2241 Frame pen
2242 Frame line type
2251 Parameter name:
2253 Pen:
2254 Line type:
2258 User
2260 small
2261 middle
2262 large
2284 Attribute name
2288 Decimal places (0-12)
2306 No
2307 Yes
2308 Dimension text
2312 Decimal places
2334 Tolerance
2337 Width
2343 Modify
2371 Quick
2376 Name
2378 Save mode
2418 Contour end
2420 Move
2421 Copy
2422 Multiple
2423 Of
2424 Auto
2425 Element
2426 3 Points
2428 Window
2429 Normal
2430 Reset
2431 CAD Entry window
2434 All
2435 3D
2436 Image
2439 Segment
2440 Delete all auxiliary-geometry
2442 no arrow symbol
2443 Backslash
2444 Dimension value above dimension line
2445 Dimension value in interrupted dimension line
2446 Dimension value under dimension line
2447 Contour
2450 Delete last drawn element
2452 Polygon
2453 Modify pen/line of element
2454 Modify pen/line of segment
2455 Divide element
2456 Join element
2457 Name element
2459 Parameter...
2468 %
2469 Colours
2471 256 grey scales
2476 Size
2480 Width:
2481 Pixel
2482 Height:
2483 Depiction parameters
2487 off
2489 simple
2492 high
2494 Quality
2500 Generate
2504 Delete file
2510 END
2514 Directory
2515 not found
2547 Geometry
2548 Select
2549 View##3. main term in menu bar
2550 Light source
2567 X
2568 Y
2571 Apply model direct
2572 Apply model as hole
2573 Apply model as curve
2574 Adjust horizontal
2575 Adjust vertical
2576 Rotate
2577 Mirror
2578 Scale
2579 Rotate 3D
2580 Mirror 3D
2581 Measure horizontal
2582 Measure vertical
2583 Measure direct
2584 Measure angle
2585 Measure area
2586 Element information
2587 Model information
2589 File:<>   ELITECAD
2591 Copyright
2596 Name:
2597 Type:
2598 Status:
2602 Plot
2605 Landscape
2606 Portrait
2610 Warning
2615 Scaling:
2619 Format
2621 Colour
2630 3D OBJECT PARAMETERS
2635 Delta:
2637 Online
2642 Texture
2643 Remove
2661 free parameters
2667 Normal
2668 Best
2670 Attribute
2671 Active model
2674 Selection
2679 Select image
2681 Single points
2682 Selectable points
2688 Snap mode\n Middle Element
2690 Snap mode\nto Point
2691 Snap mode\nto Section
2692 Snap mode\nto Centre Circle
2693 Snap mode Grid
2694 Snap mode Tangent
2696 Cube
2697 Cuboid
2698 Prism
2699 Cone
2700 Cylinder
2701 Barrel
2702 Circle sector
2703 Conical frustum
2704 Pyramid
2706 1:1
2707 1:2
2708 1:5
2709 1:10
2710 1:20
2711 1:25
2712 1:50
2713 1:100
2714 1:200
2715 1:500
2716 1:1000
2717 FREE    
2727 A0
2728 A1
2729 A2
2730 A3
2731 A4
2732 A5
2733 M:
2735 G:
2737 C:
2739 L:
2740 Level
2744 3D test mode
2762 ?
2767 Modify text
2768 Scale with supplementary elements
2769 Contour end
2770 Contour backstep
2771 Pen/line\nfrom element
2773 Copy element to\nactive model
2775 Copy supplementary elements to\nmodel
2776 Stretch all points
2777 Arc clockwise
2778 Arc counterclockwise
2780 Radius
2781 +
2782 -
2783 trim cross
2784 fill corners
2785 Precision
2787 Radii
2788 P rotate
2789 P move
2794 View parameters
2795 3D-definitions
2796 Auxiliary-geometry
2797 Line
2798 Marker
2799 Camera
2800 free rotatable
2801 Axes
2802 Flat shading
2803 Gouraud
2804 Phong
2805 Radiosity
2806 Ray-Tracing
2807 Refresh
2810 View type
2811 Plan
2812 act. zoom
2813 Unit
2814 Scaling
2815 Parameter view
2817 +y
2818 -x
2819 +z
2820 -z
2821 +x
2822 -y
2823 Call view
2824 Insert view
2825 new plot
2827 Plot name:
2828 Plot
2829 Insert##Menu-Name
2831 Active
2833 Show view
2834 Show## start new CAD
2835 Modify view
2836 Plot-Parameters
2837 Intersection lines
2838 Backface culling
2839 Auto-hiddenline
2840 Hidden lines with pen
2842 Hidden lines dashed
2843 Tolerance [%]
2846 Calculate
2847 4-views
2848 On
2849 Front
2850 Pages
2851 Call
2853 Rotation angle
2855 Measure angle of a line
2856 Measure angle between 2 lines
2857 Coordinates of point
2858 Delete/manipulate undo
2859 Delete/manipulate redo
2860 Image assembly
2861 Zoom on format
2862 Last zoom
2863 Zoom by 2 points
2864 SECTIONS
2865 Section with active work plane
2866 Section surfaces and create 2D-contour
2867 Section line
2868 Section surfaces
2869 Surface section
2870 Section surfaces and create covering surface
2871 Volume section
2872 Place result in top view
2873 Hatch section planes
2874 Hatch section
2875 Temp window
2883 Rotate around screen-X-axis
2884 Rotate around screen-Y-axis
2885 Rotate around screen-Z-axis
2886 Move right
2887 Move up
2888 Decrease perspective distance
2889 Move left
2890 Move down
2891 Increase perspective distance
2892 Directory...
2893 Dimension parameters
2894 Detail parameters
2895 Text parameters
2896 Tolerance parameters
2898 linear dimension
2899 No tolerance text / no exponent
2900 Single line tolerance text
2901 double line tolerance-text\ntop and bottom tolerance value
2902 double line dimension
2903 M,Cm/mm dim.
2904 Tolerance/Exponent
2905 Text height of tolerance text
2906 fix distance to dimensioned point
2907 fix length of dimension auxiliary-line
2908 Distance from point
2909 Projection auxiliary-line (top)
2910 Projection auxiliary-line (bottom)
2911 Length of dimension line projection with extra dim.
2912 Radius dimension
2913 No line to centre
2914 Line to centre
2915 Dimension value parallel/above dimension line
2916 Dimension value parallel/in interrupted dimension line
2917 Dimension value parallel/below dimension line
2918 Dimension value horizontal/above dimension line
2919 Dimension value horizontal/in interrupted dimension line
2920 Dimension value horizontal/below dimension line
2921 Angle dimension
2922 Horizontal dimension value
2923 Dimension value on dimension line
2924 Reference value
2925 Supplement to linear dimension
2926 fix length of dimension line
2927 Start tip
2928 Floating dimension
2929 Query dimension text position
2930 Coordinate dimension
2931 Dimension arrow parameters
2932 Dimension text parameters
2933 Text height (0.011000 mm)
2934 Text width (01000 mm)
2935 Text slant
2936 1: Distance = 0; 2: dist.=50% text height, 2.5: dist.=75% text height
2938 Query text
2939 0 - suppression
2940 0 before comma
2941 Decimal separator
2942 Point
2943 Comma
2944 Depiction
2945 as decimal number
2946 as fraction for feet/inch
2947 In degree/minutes/seconds
2948 round at
2949 Round on whole mm
2950 round half cm
2951 Point with M
2952 Point with numbers >= 100 e.g.:  1.24 
2953 Auxiliary-lines
2966 Type
2970 Decimal
2971 Fraction
2974 Style
2978 Offset
2979 no
2980 horizontal single value
2981 vertical single dimension
2982 direct single dimension
2983 horizontal chain dimension
2984 vertical chain dimension
2985 direct chain dimension
2986 horizontal coordinate dimension
2987 vertical coordinates dimension
2988 hor. + vert. coordinates
2989 horizontal offset value
2990 vertical reference dimension
2991 direct offset dimension
2992 horizontal variable dimension
2993 vertical variable dimension
2994 direct floating dimension
2995 Diameter dimension
2996 isometric dimension
2997 Dimension on arc
2998 place dimension
2999 M,Cm/mm
3000 Append
3001 Last
3002 Origin
3003 Hatching parameters
3004 double line hatch
3005 Angle (-180+180)
3006 Number
3007 Repeat factor (0-15)
3008 free line hatch
3011 1.repeat-factor (0-15)
3012 2.repeat factor (0-15)
3013 centred
3014 Start distance
3015 Hatch1
3016 Hatch2
3017 Infill hatch
3019 Model hatch
3020 Hatch definition
3021 X-offset
3022 Y-offset
3023 Alignment
3024 simple line hatch
3025 double line hatch
3026 simple cross-hatch
3027 multiple cross-hatch
3028 variable double-hatch
3029 variable cross-hatch
3030 Line hatch
3038 Centred
3043 Colour selections
3052 Place library part relative
3053 Save drawing under the same name
3054 Save drawing under another name
3057 Send
3058 Load work copy
3059 Save work copy
3060 Define section
3061 Define detail
3062 Define view
3065 Clipping...
3066 Curves
3067 Hidden line
3068 Load drawing
3070 Make a new drawing
3071 Place symbol absolute
3074 Solid on/off
3076 Change background colour
3078 Elements on/off
3079 View format frame on/off
3080 View format plane on/off
3081 Pixel hidden line on/off
3082 Marker on/off
3084 Disable/enable dynamic rotation
3086 Cast shadow on/off
3087 Transparency on/off
3088 Texture on/off
3090 Show selection
3091 Hide selection
3094 Show/hide 2D-Def selection
3095 Show 3D-Def selection
3096 Hide 3D-Def selection
3111 Globally modify pen/line type of elements
3112 Globally modify all elements in image
3114 Modify parameters of all text in image
3126 Cancel
3129 Element to active model
3131 Text/Dimension/Hatch/Arrow to active hatch
3132 with distance
3133 Sheet unfolding
3134 Sheet thickness
3135 Graphic window
3136 New unfolding
3137 Define bending
3138 Delete last bending
3139 Next surface
3140 automatic unfolding
3141 Save file
3142 VDA-FS Parameters
3143 LOAD
3144 Points
3145 Point sequence
3146 Point-vector sequence
3147 Surfaces trimmed
3148 SET
3149 GROUP
3150 TLIST
3151 LOAD
3152 Special parts
3154 Set plotter...
3155 Export
3158 Clipping on/off
3159 Delete Element, Text,...
3160 Delete view
3162 Multiple models
3163 Multiple groups
3164 Multiple class
3165 Multiple levels
3169 Multiple objects
3170 Progress indication
3171 Create model hatch
3173 Image-name:
3174 Cut
3175 Remove contour
3177 Refresh view
3178 Stretch at point
3179 Stretch at line
3181 Image file - position relative
3182 Delete block
3183 Delete section
3184 Show
3185 Information
3202 Colour mode
3204 Start position active zoom
3205 Connect
3206 Header
3208 Hiddenline uses edge colour
3209 Masked lines invisible
3211 Modify section line
3212 File name of section symbols
3214 automatic hiddenline
3217 Parameter selection
3218 equal resolution for neighbouring surfaces
3219 Company:
3220 Contact person:
3221 Telephone:
3222 Address:
3223 source system:
3224 Creation date:
3225 Send filename:
3226 Project:
3227 Object attribute:
3228 Variants:
3229 Confidentiality
3230 Validity date:
3231 Recipient company:
3232 Recipient name/dept.:
3234 Height of camera
3235 Height of view point
3236 Aperture angle of the camera
3237 Distance of camera to view point
3238 Pitch of camera
3239 Distortion angle of the camera
3240 Relative changes
3241 Shift camera in view point direction
3242 relative shift value
3243 Shift camera in height
3244 Shift camera sideways
3245 Move viewpoint towards camera
3246 Move viewpoint to the side
3247 Turn Camera Up/Down
3248 relative pivot angle
3249 Turn camera sideways
3250 Turn viewpoint up/down
3251 Turn viewpoint to the side
3252 Modify camera aperture angle
3253 relative aperture angle
3254 Modify cut-out
3255 Percental change
3256 Move
3257 go into direction of view point
3258 go upwards
3259 move to the side
3260 Coordinates
3261 Move viewpoint higher
3265 PROJECTION
3266 parallel Projection
3267 perspective projection
3268 Cavalier Projection
3269 Cabinet projection
3270 slanted projection
3275 exact hidden line
3276 Save redlining levels
3277 Delete redlining
3279 Plan not in start position
3280 Supplemental scaling
3281 PARAMETER
3282 Air cavity
3283 Colour for bent lines
3284 Calculation method
3285 Formula
3286 Table
3289 File:<>   ELITECAD Viewer
3296 3D-Object
3301 Close
3304 Repeat##Repeat
3310 Mark all
3317 Drawing...
3319 Key combinations
3321 Solid
3338 Extras
3342 Standard
3343 Redlining
3344 Measure
3345 Draw arrow
3349 TTF
3350 Font name
3351 Bold
3352 Italic
3353 Underlined
3354 Crossed out
3355 Blend menu
3356 Blend single edge
3357 Blend single corner
3359 Bulge
3360 Modify blend parameters
3361 Radius old
3362 New radius
3363 Old offset
3364 New offset
3365 Old bulge
3366 New bulge
3367 Curve general
3368 Select classification
3371 2D-Detail
3372 Create 2D-Polygon-detail
3373 2D-Detail dimensioning - start
3374 2D-Detail dimensioning - stop
3375 2D-Detail modify scale
3376 2D-Detail delete
3377 active image
3378 free size
3379 Edit pixel
3381 Seam testing off
3382 Overlap testing off
3383 Increase curve resolution
3385 Licence terms
3386 Analyse
3387 Statistics
3388 Purge data
3389 3D refresh
3390 Show
3391 2D check
3392 3D check
3393 Offline-def. test
3394 3D Visibility on/off
3395 3D Filter
3396 3D Types
3397 Rotation extrude
3398 Rotation box
3399 2-views objects
3400 3-views objects
3401 Operator
3402 Free definition
3403 without ACIS
3404 with ACIS
3405 offline
3406 online
3408 Hidden lines
3409 Tangential transitions
3410 2D
3411 fillet successive edges
3412 Place title block
3413 Complete title block
3414 Edge blend
3415 Draft
3416 Addititive surfaces deletion
3427 Trim
3428 Invert colour
3429 Delete range
3430 High quality on/off
3431 Copy range
3432 Copy range transparent
3433 3D Box mode on/off
3434 Show 3D-Box selection
3435 Hide 3D-Box selection
3438 Split
3440 Delete surfaces
3448 Modify single colour
3449 modify colour globally
3450 Camera pivot point
3461 References
3467 Delete element
3468 Move
3469 To element
3470 Element tracking mode
3471 Enter text
3472 Edges on/off
3473 Light on/off
3475 Right justified
3477 Left justified
3478 Justification
3479 Text alignment
3482 Model to background
3484 TTF-Parameters
3485 Projection
3486 Pen for (back) slash
3493 place active line
3494 Modify visibility
3495 Sides
3496 Previous page
3497 Active page
3498 Next page
3501 Verify 2D model
3502 Verify 3D tree
3503 XEOMETRIC GmbH##do not translate, change or delete
3506 of
3513 To align at a line
3515 Last library part name
3516 Rotate counterclockwise
3517 Rotate clockwise
3518 Mirror vertical
3519 Mirror horizontal
3520 Mirror by arbitrary axis
3521 Matrix...
3522 Reference point free selection
3523 Rotate on x-Axis
3524 Rotate on y-Axis
3525 Library parts
3526 Vector shadow
3527 Brightness on/off
3528 Brightn. intens. in percent
3529 Brightn. share in percent
3530 Sum light sources\n when light sources are summed, the total intensity will be divided equally over all light sources.
3531 Light source
3536 Function not implemented
3538 Mechanics
3539 AR Training
3540 AR Planning
3541 AR Design
3543 Please click model
3548 Please click element
3549 Arrow start?
3550 Arrow end?
3555 Select start point
3556 Select target point
3557 Click the position of the title block
3559 Scale of detail [ 1/2.5 or 1:2.5]?
3560 Modify scale of which detail? [click frame]?
3561 Place where?
3562 Name for detail:
3563 M=
3564 Delete which detail [click frame]?
3565 Dimension which detail [click frame]?
3566 Edit which model?
3567 DETAIL
3569 Select plotter configuration
3570 Diskette...
3572 Current plotter config. will be overwritten!\n Continue?
3573 Current plotter config. will be deleted!\n Continue?
3575 Format detection
3576 Range
3578 Zoomed
3579 Modify
3580 180 rotation
3582 Factor
3583 X-offset [mm]
3584 Y-offset [mm]
3585 Options...
3587 Please select the configuration for your plotter of choice \"%s\"from the list below. Change volume address when the configuration file is on another disk.
3588 Printer
3589 &Name:##usage in print dialog only (& is keyboard accelerator)
3590 &Properties##usage in print dialog only (& is keyboard accelerator)
3593 Location:
3594 Comment:
3595 Output to fi&le##usage in print dialog only (& is keyboard accelerator)
3596 Print range
3597 &All##usage in print dialog only (& is keyboard accelerator)
3598 Pa&ges##usage in print dialog only (& is keyboard accelerator)
3599 &Selection##usage in print dialog only (& is keyboard accelerator)
3600 &from:##usage in print dialog only (& is keyboard accelerator)
3601 &to:##usage in print dialog only (& is keyboard accelerator)
3602 Copies
3603 Number of copies:##usage in print dialog only (& is keyboard accelerator)
3604 C&ollate##usage in print dialog only (& is keyboard accelerator)
3605 Print
3608 &Help##usage in print dialog only (& is keyboard accelerator)
3610 Plotter
3611 Plot to file
3612 VRML
3613 Save in VRML file
3615 Plotter config files
3616 Find file
3618 Reset work plane
3619 Select work plane origin
3620 Work plane by 3 points
3621 Work plane by normal
3622 Work plane on surface
3623 Change work plane
3624 Work plane depiction off/on
3626 Angle parameter
3627 Move parameter
3630 Reset camera
3631 Rotate X+
3632 Rotate X-
3633 Move X+
3634 Move X-
3635 Rotate Y+
3636 Rotate Y-
3637 Move Y+
3638 Move Y-
3639 Pen colour
3640 Rotate Z+
3641 Rotate Z-
3642 Move Z+
3643 Move Z-
3648 3D Axes on/off
3649 Perspective on/off
3654 Modify Boolean operation
3655 Delete operator definition
3657 Define special part
3659 Surface to surface
3662 Modify wire model colour
3663 Delete 3D
3664 Entry mode
3666 Switch online
3668 Volume calculation
3671 Invert surface
3672 Join surface
3674 Smooth surface
3675 Modify smoothing tolerance angle
3677 Freeform / curve
3678 Delete free form surface
3679 Delete design box
3680 Delete design surface
3681 Delete trans box
3682 Delete trans surface
3683 Modify type
3684 Define free form surface
3685 Define design box
3686 Define design surface
3687 Define trans box
3688 Define trans surface
3689 Define 2-views object
3690 Define 3-views object
3691 Define 2-views curve
3692 Curve by unfold contour
3693 Delete 2-views object
3694 Delete 3-views object
3695 Curve by coordinates
3696 Delete 2-views curve
3700 Variable trimming/fillet
3702 Modify pen colour of normals
3704 Invert trimming
3705 Delete trimming
3715 Delete rotation box
3716 Delete rotation extrude
3717 Delete box
3718 Delete extrude
3719 Delete polygon
3720 Modify size
3721 Modify rotation angle
3722 Modify rotation axis
3723 Modify colour
3724 Modify resolution
3725 Define rotation box
3726 Define rotation extrude
3727 Define box
3728 Define extrude
3729 Define planar surface
3732 Next contour
3736 Arc
3737 Branching parameters
3738 Select pen+line type
3740 Modify pen/line type\n from segment
3741 Modify pen/line type\n from element
3742 Divide element
3743 Name element
3744 Join element
3746 Delete segment
3748 Delete next element
3749 Delete previous element
3757 Block model
3762 multiple
3766 Modify pen/line type of selection
3767 to model
3768 copy to model
3769 Modify classification
3771 New group
3772 Select buffer/import filter
3773 Snap mode
3776 Snap mode Section point
3777 Snap mode\Auxiliary-geometry section point
3778 Snap mode\nCentre Element
3779 Snap mode\nCentre Circle
3784 Snap mode\nNormal to Element
3785 Snap mode\nKeep orthogonal
3786 Snap mode\nKeep horizontal
3787 Snap mode\nKeep vertical
3788 Snap mode\nCentre edge
3789 Snap mode\nCentre surface
3790 Snap mode Section point between\nsurface edge and work plane
3792 Snap mode\n to Auto snap
3793 Silhouette recognition
3797 Track mode free
3798 Snap mode Move
3801 Hiddenline quality
3802 Opening symbols
3804 Pixel hidden line
3808 Zoom factor
3810 Attribute-parameters
3811 all attributes\nto selection
3812 Attribute to selection
3813 Delete attribute\nfrom selection!
3814 Model info
3815 List attributes
3816 Bills of material
3819 Show active image
3820 Save drawing
3829 Call macro
3831 Manipulation
3838 do not copy
3839 never copy
3840 multiple
3841 copy
3842 continue
3845 Direct dimensioning
3846 Vertical\ndimensioning
3847 Horizontal\ndimensioning
3848 Move dimension
3849 Chain dimension\ndirect
3850 Chain dimension\nvertical
3851 Chain dimension\nhorizontal
3852 Trim dimension line
3853 Diameter\ndimensioning at circle
3854 Radius dimensioning
3855 Angle measuring
3856 Delete dimension
3857 Modify dimension parameters
3858 Parameters\n of dimension
3859 Add tolerance
3860 ISO-Dimensioning
3861 Place\ndimension line
3868 Area, circumference and centre of gravity
3871 Structure
3872 New model
3873 Activate model
3874 Move model
3875 Copy model
3876 Element to\nactive model
3882 Geometry on/off
3883 Text on/off
3884 Arrows on/off
3885 Measuring on/off
3886 Hatching on/off
3887 Draw text
3888 Draw arrows
3889 Draw dimensions
3890 Draw hatching
3892 Save hatch parameter
3894 Hatch end
3895 Delete hatch
3896 Copy hatch parameter
3897 Modify hatch parameter
3898 Auto hatching
3899 Element hatching
3901 Stretch point
3903 Stretch point selectable
3904 Parallel-Contour
3906 Block-stretch at point
3907 Block-stretch at line
3908 in buffer/import filter
3909 from buffer/import filter
3910 clear buffer/import filter
3911 Section copy to buffer/import filter
3912 Block copy in buffer/import filter
3913 Show double models
3916 Set format
3917 Set scale
3919 Set units
3920 Fix reference point
3921 relative coordinates
3922 absolute coordinates
3924 Grid on/off
3925 Grid parameters
3926 Degree/arc radians
3929 Text entry
3930 Text at line
3931 Copy text
3932 Move text
3934 Text from file
3935 Take text
3936 Delete text
3937 Delete last text
3938 Modify text parameters
3939 Text parameters\n of text
3940 Insert text balloon
3941 Delete text balloon
3942 Reference arrow\nparameter
3943 Reference arrow\nstart
3944 Reference arrow\nend
3945 Reference arrow\ndelete
3946 Arrow on frame
3949 Parallel lines\nrelative
3950 Parallel lines\nabsolute
3951 Parallel lines\nrepeat absolute
3952 Straight line with given\nangle by one point
3953 Circle tangent with\ngiven angle
3954 Straight line by\n2 points
3955 Tangent\non two circles
3956 Circle tangent\nby one point
3957 Tangent\nnormal on line
3958 Straight line by point\n and normal on line
3959 Circle by radius\nand reference point
3960 Circle with given\n centre and radius
3961 Circle with given centre\nby a point
3962 Tangent circle with given/n centre point on element
3964 Element\n tangent at two points
3965 Circle with given radius\nby two points
3966 Tangent circle with given radius\non one element and by one point
3967 Circle tangent at given radial\non two elements
3968 Circle tangent on two elements\n by one point
3969 Tangent circle\n on three elements
3970 Auxiliary-geometry at single point
3971 Rectangle by diagonal
3972 Rectangle by\ndimension and reference point
3977 Switch between move/draw
3981 Chamfer
3982 Arc by angle,\n direction and center
3983 Arc by 3 points
3984 Delete geometry
3985 Delete single auxiliary-geometry
3987 Spline
3988 Start drawing
3989 Stop drawing
3990 Explosion
3993 Snap mode Centre of two point
3994 Snap mode Distance point to element
4011 Snap mode Section point\non surface by straight line
4012 Angle between 2 surfaces
4015 Snap mode
4016 Snap mode point on surface
4017 single pen on/off
4018 single line type on/off
4019 Snap mode Quadrants
4023 Parameter filter
4024 Refresh filter
4029 Delete pixel image
4034 Crop pixel image
4035 Invert monochrome pixels
4036 Delete pixel range
4042 List colours
4044 Fillet edges
4046 New classification
4047 Insert texture
4048 Copy texture
4049 Delete texture
4052 Add texture to 3D-definition
4053 Modify global hatch parameters
4058 Convert TTF, parameters remain
4059 Convert TTF, parameters scaled - size remains
4061 CAD-basics-2D
4067 Supplementary elements to model
4068 Point input
4069 Auxiliary-line by centre
4070 Enter start point
4072 Delete auxiliary-line
4073 Delete auxiliary-circle
4083 3D-Def-text
4084 Auxiliary-geom.##abbreviation for auxiliary-geometry (not enough space)
4085 Hatches
4086 Pixel-frame
4087 Transparency
4088 3D-Camera-lock
4089 Camera lock
4090 Cross hair
4091 3D Box mode
4092 Double buffer
4093 Raster
4094 Line width
4095 Interrupt display
4096 OpenGL
4097 Image - Help
4098 Image - system
4099 Position
4100 Direction
4101 Intensity
4103 Sharpness
4105 Shine
4106 Shine weight
4107 Shine strength
4108 Sum light sources
4109 Colour properties
4110 Colour scheme
4111 Lines black / areas greyscale
4112 Lines coloured / areas coloured
4113 Lines black / areas coloured
4114 Print line width
4121 Number
4123 Print colour
4124 Line width
4125 Colours 0 to 9 can not be modified
4128 Parallel light
4129 Point light
4130 Spotlight
4135 Real transparency
4136 Import...
4137 Export...
4139 Scheme could not be found!
4140 Use standard schemes
4142 Format image
4144 Original size
4146 dpi
4148 Scaling in percent
4149 Scaling in DPI
4150 The number must be between 1 and 2000.
4151 Activate compatibility mode
4152 Activates / deactivates Compatibility mode
4153 Compatibility
4157 Delete light source
4158 Load light sources from file
4159 Light source properties
4160 New light source
4161 Intensity percentage of max. value
4163 Openings angle in degrees
4164 Density in % of max. value
4170 Pen filter for elements only
4171 Save light sources in file
4172 Title block data
4173 Drawing no.:
4174 Rev.:##shortcut for revision
4175 Page.:
4176 Title:
4178 Scale:
4179 Material:
4180 Weight:
4181 Editor:
4182 at:
4183 Checked by:
4184 Released by:
4185 Creator:
4186 from:
4187 Rev.-list
4190 Revisions and modifications list
4191 Send
4192 Comment
4193 Date
4196 Building project:
4197 Plan-size:
4198 Plan-content:
4199 Additional:
4200 Drawn.
4201 Check.
4202 NOTE
4204 Point is not on the arc
4205 Start point of arc?
4207 End point of arc?
4208 Indicate next arc end point or [ENTER] to end
4209 Please click end of section line
4210 Please point out section line or (M)odel/[ENTER = end]
4211 Please select Opening-model or H/[ENTER = end]
4212 Dimensioning type (1..HOR,2..VER,3..DIR)
4213 Angle of the dimension
4214 Position of dimension chain
4215 Selection of elements with pen,line type (-1 = all)
4216 Modify to pen, line type (-1 = no change)
4217 Display all attributes from active model  (0/1)
4218 Please enter model selection (empty .. all)
4219 Selection of text with pen,height,width,font,frame pen,frame lt (-1 = all)
4220 Modify by pen,height,width,font,frame pen,frame lt (-1 = no change)
4221 Selection of dimension text with pen,height,width,font,frame pen,frame lt (-1 = all)
4222 Modify text (1) or dimension text (2) globally?
4223 Mask generator won\'t start!
4224 height
4225 Copy group of which model? ([ENTER] for new group)
4226 Copy to which model? ([ENTER] to end, B for image)
4227 Model for group name, or group name?
4229 B
4230 Model without reference axis!
4231 Error loading library part!
4232 With reference axis?
4233 Copy which attributes (all/no,selective 1/2/3)?
4234 Copy which attribute ([ENTER] for End)?
4235 Attribute for library part names?
4236 Directories (space delimited)?
4237 Delete original model?
4241 Which model?
4242 Modify which pen/line type (-1 ... all)?
4243 New pen/line type ( -1 ... same ; 0,0 ... delete! )?
4244 No closed outer contour found!
4245 Attribute name for hiddenline :
4246 Attribute value for hiddenline :
4249 Directory for library parts
4250 Enter scale (0 .. 1)
4252 Filter (#M,#G,#C,#L) which attribute / classification
4253 Content of attribute or classification (*? allowed)
4254 Modify which infill hatch pen (Enter number, -1 = all)?
4256 Not available in this CAD-Version!
4257 new pen  (%d..%d) or < m > for colour menu?
4258 Modify which infill-hatch pen (click hatch, number or <m>)?
4259 new pen (%d..%d) or pick colour?
4260 no hatch found!
4261 Modify global text part: Search text?
4262 Replacement text?
4263 Number of text modifications: %d
4264 No matching text found!
4265 Horizontal dimension position top or [ENTER]?
4266 Horizontal dimension position bottom or [ENTER]?
4267 Vertical dimension position left or [ENTER]?
4268 Vertical dimension position right or [ENTER]?
4269 Length of chain dimension [mm]?
4272 Selection of 3D elements with colours,pen,line type (-1..all)
4273 Modify by colour, pen, line type (-1..no change)
4274 Global modify dimension arrow(1) or indication arrow (2)
4275 Modify which pen with dimension lines (-1 for all)?
4276 Modify which pen with indicator arrows (-1 for all)?
4277 Switch global to which pen?
4278 Modify which line type (-1 for all)?
4279 Modify global to which line type?
4280 Element is not straight!
4281 Element is a point!
4282 Element not found!
4283 First element
4284 Second element
4285 Position for start point (or [ENTER] = as is)?
4286 Position of end point (or [ENTER] = as is)?
4287 Symm. line could not be generated!
4296 GO system window
4299 GO stop
4307 Message
4311 RGB colours
4312 Files
4326 Ctrl+
4327 Shift+
4328 Alt+
4332 F12
4333 F11
4334 F10
4335 F9
4336 F8
4337 F7
4338 F6
4339 F5
4340 F4
4341 F3
4342 F2
4343 F1
4344 Enter
4345 Space
4346 Print
4347 Esc
4348 Tab
4350 Home
4352 Image-
4353 Image+
4354 Left
4355 Right
4356 Upward
4357 Downward
4358 Insert
4359 Remove
4364 File?
4366 Toolbar exists, overwrite?
4370 Ready
4376 PEN-ASSIGNMENT
4377 LINE TYPES-ASSIGNMENT
4378 LAYER-ASIGNMENT
4379 CHARACTER-ASSIGNMENT
4380 DXF-Export settings
4383 SAVE DXF-SPECIAL PARAMETERS
4384 Tolerance text
4385 as personal text
4386 as personal dimension style
4387 in dimension block
4388 Helpline - Arrow
4389 constant
4390 calculate
4391 Distance helpl.-arrow:
4392 Infill hatch:
4393 Circular resolution
4394 Fixed number
4395 Arc length
4396 SAVE-DXF
4405 SAVE
4406 DXF-FILE saved!
4409 DXF-Import settings
4411 LAYER-INFO
4412 Show LAYER names:
4413 defined layers
4414 used layers
4415 disabled layers
4416 LINE TYPES-INFO
4417 LINE TYPES-show names:
4418 line types defined
4419 line types used
4420 LOAD-DXF
4423 FONT ASSIGNMENT
4424 Configuration:
4425 Copy drawing boundaries
4426 Copy reference point
4427 Load disabled layers
4428 Dimensioning
4430 free
4431 Lines+Texts
4432 Contour for infill hatch
4433 Generate view window
4435 DWG
4436 Read mode:
4439 Design model range
4440 Paper range
4441 Units:
4442 active
4444 m##short for meter
4445 Blockname
4446 in model name
4447 in attr. block
4448 Layer names:
4449 in group
4450 in class
4451 in level
4452 in layer
4453 INFILL COLOUR ALLOCATION
4464 ELITECAD-CHARACTER SET
4465 capital  (AE)
4466 capital  (OE)
4467 capital  (UE)
4468 small  (ae)
4469 small  (oe)
4470 small  (ue)
4471 sharp ss (sz)
4472 large diameter
4473 small diameter
4474 plus/minus
4475 degree
4476 squared
4477 third power
4478 my
4479 ASCII-CODE:
4480 ATTRIBUTE ALLOCATION
4481 Target system:
4483 AutoCAD 11 / 12
4488 simple geometry
4489 Dimensioning in blocks
4490 Associative dimensioning
4491 Hatch:
4492 do not save
4493 save
4494 as block
4495 SPECIAL-PARAMETER
4496 Generate block
4497 Model->Block
4498 Level->Block
4499 Class->Block
4501 LAYERNAME for:
4502 ELEMENTS:
4503 from Group
4504 from Class
4505 from Level
4506 from Layer
4507 TEXT:
4508 fix
4509 HATCHES:
4510 DIMENSION:
4511 Save mode
4514 Decimal places:
4516 Save infill hatch
4517 DXF-INFO
4518 Save all attributes
4521 DXF/DWG IMPORT...
4522 DXF/DWG EXPORT...
4523 Load configuration...
4524 Save configuration...
4525 Show protocol
4528 Tables
4529 IMPORT
4530 Pen
4531 Line types
4532 Characters
4533 Fonts
4534 Layer
4536 Filling colours
4537 EXPORT
4538 Show info
4539 DXF-Version
4540 Layers##plural
4543 text used
4544 fonts used
4545 attributes used
4546 CAD-Layer names
4547 CAD-Block names
4549 DXF-IMPORT
4550 DXF-EXPORT
4551 Utilities
4552 DXF->DWG
4553 DWG->DXF
4568 Help ...
4571 Error during save!
4572 LAYERS found
4573 LINE TYPES found
4574 VERSION found
4575 COLOURS found
4576 DWG-File saved!
4577 DXF-file saved!
4579 Filename
4580 Archive name
4581 Filename (DXF->DWG)
4582 Filename (DWG->DXF)
4583 Directory for LARGE->small
4585 CAD400-Font Number
4586 already exists!
4588 No DOS data on disk!
4589 Filename from modem
4590 Wrong file extension!
4591 Filename on modem
4592 Save Dxf tables
4593 Load Dxf tables
4594 WARNING
4595 really delete!
4597 New drawing
4598 Infill mode
4600 on
4601 automatic
4602 Elements as
4603 Line+arc
4604 Polylines
4605 Export view
4607 AutoCAD 2000 / 2002
4608 Text reference pts:
4609 copy
4610 adjusted
4611 aligned
4612 Start DXF import
4613 DXF-Import stopped
4615 Start DXF export
4616 DXF-Export stopped
4617 Error at DXF-Export
4618 AS ELEMENTS
4619 DXF files
4620 DWG files
4621 DXF Configuration files
4625 Hatch
4627 Output
4628 Environment variable HD_U not set!
4630 Environment variable HD_VE not set!
4631 Net adapter or dongle-ID could not be read!
4632 (Network card-ID)
4633 (Dongle-ID)
4634 Please enter the exact 32 Hex numbers!
4635 Enter HEX-numbers only! (0-9, A-F)!
4636 Codeword OK!
4637 Entry
4638 Error when opening %s file!
4639 Error when saving %s file!
4640 Enter codeword
4641 Program
4642 Serial number:
4643 Codeword:
4644 Copy
4659 Section-type
4660 Select initial yourself
4661 Save triangular point
4662 Load data as triangles?
4663 Flat shading?
4664 Rasterise and smooth triangulation?
4665 Reference height?
4666 ELITECAD
4667 ELITECAD Viewer
4673 Measure arc length
4674 Arc dimension
4675 View is OFFLINE!
4676 No plot available!
4677 %s %s will be frozen!
4680 %s %s will be scaled!
4683 %s %s will be updated!
4686 Switch view
4687 Enter point %d for Section definition [identical point -> End]
4688 Which direction?
4689 Views
4690 Supplementary elements switched OFF for save/load.
4691 Supplementary elements switched ON for save/soad.
4692 Draw supplementary elements
4693 Save/load texts
4694 Save/load arrows
4695 Save/load dimensions
4696 Save/load hatchings
4697 Save/load supplementary elements
4698 Switches
4700 Detail
4702 Enlargement factor (0.0011000)
4703 Input error
4705 Property list cannot be displayed!
4706 Refresh detail?
4707 Detail cannot be derived from plot!
4708 Adjust text, hatch angle to rotation?
4711 Invert selection
4713 Delete\nlast hatch
4715 Stretch which point or line?
4716 Stretch which point or line? or enter selection.
4717 Next POLYGON point?
4718 Newly associate which dimension (point in text)?
4719 Model %d for association (ENTER = none)
4723 Shadow model filled: %g sec
4724 Storey separation lines re-adjusted : %.3g sec\n
4725 unchanged : % 8d\n
4726 deleted   : % 8d\n
4727 inserted  : % 8d\n 
4728 Modify chamfer
4729 Modify radius
4730 Modify fillet
4732 Further CAD layers
4733 (empty)
4734 Further mask layers
4735 Layer group
4736 Default Layer
4737 All visible
4738 All invisible
4739 Invert visibility
4741 Import
4745 Rename
4746 New main layer group
4747 New layer group
4748 New layer
4749 Select
4750 new layer group
4751 new layer
4752 Invalid layer name!
4753 Layer name is not unique!
4754 Name for layer export?
4755 Name for layer import?
4756 Show all
4757 active
4760 visible
4761 invisible
4762 Name < %s / %s >
4766 < %s >
4770 Select storey
4772 Create new view
4773 Create new section
4775 Create new detail
4776 Create new plot
4779 Design-model views
4780 Floor plans
4781 Details
4782 Plots
4785 Which side:
4787 UNdone
4788 REdone
4789 View <%s> is scaled!
4790 Move element
4791 Modify Element
4792 First point on line or circle for tangent?
4793 Second point on the line or circle for tangent?
4794 Point on the line or circle for tangent?
4795 Point or tangential element?
4796 Tangential circle not possible!
4797 without structures
4798 direct dimension
4799 automatic dimension
4801 Freehand
4802 Auto snap
4803 Point capture
4804 Centre circle
4805 Further snap modes
4806 Tools
4807 Architecture
4808 Image display
4809 Configuration
4810 General
4811 Drawing
4812 Faceting
4813 Geodesy
4814 Mechanical lines
4815 2D/3D
4816 Pre-settings
4819 Volume info. for %s generated
4820 Generate volume info for %s not possible
4822 Planar section: calculating
4823 Planar section: done
4824 Stepped section: calculating
4825 Stepped section: done
4826 Restricted section: calculating
4827 Restricted section: done
4828 Triangular data saved successfully
4829 Error when saving triangular data!
4840 Please enter point [ENTER = end]
4841 Terrain model being generated...
4842 Excavation plan being generated...
4843 Terrain model being edited...
4844 Calculate cubature..
4845 Height lines being calculated...
4846 Should the active terrain be frozen as reference terrain?
4847 The perimeter contour was already defined.\nReplace it?
4848 Please select a closed perimeter contour!
4850 Selected contour is already part of an object!
4851 Selected contour already in use as perimeter contour!
4852 Selected contour not parallel to terrain!
4853 Contour not appropriate for use as road or street
4854 Contour is situated partly outside of terrain
4855 Contour not suited for excavation or plateau!
4856 Contour not appropriate as perimeter!
4857 A terrain model already exists!
4858 Terrain data
4862 Shadow calculation started with % 8d active polygons
4863 Visibility checked
4864 Light direction calculated
4865 Perspective recalculated
4866 Direction of sight calculated
4867 Summarize shadow polygons % 3d%% % 5.1lfsec
4868 Calculation time       
4869 Projection % 3d%%
4878 Reference terrain not determined!
4879 Perimeter contour not (yet) defined!\nThe terrain cannot be edited!
4880 Terrain
4881 Fillet single edge variably
4882 Fillet edge sequence variably
4883 Chamfer single edge
4884 Chamfer successive edges
4885 End radius
4886 Old end radius
4887 New end radius
4891 Show dimension values
4892 Help...
4893 Dimension values
4896 Circle by centre
4897 Circle by 3 points or tangents
4898 Circle by radius
4899 Single dimension
4900 Chain dimension
4901 Automatic hatch
4902 Manual hatch
4903 Number of models
4904 Number of parts
4905 Number of 3D-Def.
4906 into active model
4907 create new model
4908 2D depiction
4909 2D adopt
4910 no 2D
4911 defining rectangle
4914 centred
4918 Save as...
4936 Single line
4937 Rectangle by dimension and reference point
4938 Arc by angle
4939 Auxiliary-geometry
4940 Parallel lines
4941 Straight line by 2 points
4942 Straight line by angle and point
4943 Straight line by point normal on line
4944 Rotation extrude
4945 Rotation box
4946 2-views object
4947 3-views object
4948 Standard 3D objects
4949 Curve
4950 by points
4951 by unfold contour
4952 2-views curve
4953 Load
4954 Save as
4955 Horizontal
4956 Vertical
4957 Angle of a line
4958 Angle between 2 lines
4960 3D object evolution
4961 Position
4962 Position in active work plane
4963 Load into
4964 Load into original work plane
4965 Library
4966 Symbol
4971 Execute macro
4972 Storage need
4973 Show selection
4974 Refresh screen
4975 Fullscreen
4977 Screen settings
4980 Absolute paste
4981 Image to clipboard
4982 Adopt parameters
4983 Select
4984 Block model
4986 Delete selection
4987 3D-rotate selection
4988 3D-mirror selection
4990 Select switch work plane
4991 Properties bars
4994 Stretch single point
4995 Delete single surface
4996 3D-curves
4997 Delete single curve
4998 Round
4999 DXF
5000 IGES
5002 MI
5005 VRML
5007 SAT
5009 without mode switch
5010 Easy
5015 Num +
5016 Num -
5017 Num /
5018 M-NCS...
5019 M-NCS View...
5020 Text/Dimension/Hatch/Arrow to model
5021 Snap mode to section
5022 Snap mode to circle centre
5026 Copy element to active model
5027 Copy supplementary elements to model
5032 Draw auxiliary-line
5033 Draw auxiliary-circle
5034 Draw line
5035 Draw circle
5037 Create text
5039 Create arrow
5043 * Main functions
5044 New file
5045 * Manipulate
5046 Stretch at point or line
5054 Export IFC
5058 * Create new AR-Object
5059 * Modify
5060 Green beige/M_RAL 1000
5061 Beige/M-RAL 1001
5062 Sandy yellow/M-RAL 1002
5063 Signal yellow/M-RAL 1003
5064 Yellow gold/M-RAL 1004
5065 Honey yellow/M-RAL 1005
5066 Corn yellow/M-RAL 1006
5067 Chrome yellow?M-RAL 1007
5068 Brown beige/M-RAL 1011
5069 Lemon yellow/M-RAL 1012
5070 Pearl white/M-RAL 1013
5071 Ivory/M-RAL 1014
5072 Light ivory/M-RAL 1015
5073 Brim stoneyellow/M-RAL 1016
5074 Zinc yellow/M-RAL 1018
5075 Gray beige/M-RAL 1019
5076 Olive yellow/M-RAL 1020
5077 Cadmium yellow/M-RAL 1021
5078 Traffic yellow/M-RAL 1023
5079 Ochre yellow/M-RAL 1024
5080 Light yellow/M-RAL 1026
5081 Curry yellow/M-RAL 1027
5082 Melon yellow/M-RAL 1028
5083 Broom yellow/M-RAL 1032
5084 Dahlia yellow/M-RAL 1033
5085 Orange yellow/M-RAL 2000
5086 Orange red/M-RAL 2001
5087 Vermilion/M-RAL 2002
5088 Pastel orange/M-RAL 2003
5089 Pure range/M-RAL 2004
5090 Light orange/M-RAL 2005
5091 L.Bright orange/M-RAL 2007
5092 Bright red orange/M-RAL 2008
5093 Traffic orange/M-RAL 2009
5094 Sign. orange/M-RAL 2010
5095 Deep orange/M-RAL 2011
5096 Bright red/M-RAL 3000
5097 Signal red/M-RAL 3001
5098 Crimson/M-RAL 3002
5099 Ruby red/M-RAL 3003
5100 Purple red/M-RAL 3004
5101 Wine red/M-RAL 3005
5102 Dark red/M-RAL 3007
5103 Rust red/M-RAL 3009
5104 Red brown/M-RAL 3011
5105 Beige red/M-RAL 3012
5106 Tomato red/M-RAL 3013
5107 Classic pink/M-RAL 3014
5108 Bright pink/M-RAL 3015
5109 Coral red/M-RAL 3016
5110 Pink/M-RAL 3017
5111 Strawberry red/M-RAL 3018
5112 Traffic red/M-RAL 3020
5113 Light red/M-RAL 3024
5114 Light bright red/M-RAL 3026
5115 Raspberry red/M-RAl 3027
5116 Lilac red/M-RAL 4001
5117 Violet red/M-RAL 4002
5118 Erica purple/M-RAL 4003
5119 Bordeaux violet/M-RAL 4004
5120 Blue lilac/M-RAL 4005
5121 Traffic purple/M-RAL 4006
5122 Purple violet/m_RAL 4007
5123 Signal violet/M-RAL 4008
5124 Violet blue/M-RAL 5000
5125 Green blue/M-RAL 5001
5126 Ultramarine/M-RAL 5002
5127 Saphire blue/M-RAL 5003
5128 Dark blue/M-RAL 5004
5129 Signal blue/M-RAL 5005
5130 Brilliant blue/M-RAL 5007
5131 Gray blue/M-RAL 5008
5132 Azure blue/M-RAL 5009
5133 Gentian blue/M-RAL 5010
5134 Steel blue/M-RAL 5011
5135 Light blue/M-RAL 5012
5136 Kobalt blue/M-RAL 5013
5137 Pigeon blue/M-RAL 5014
5138 Heavenly blue/M-RAL 5015
5139 Traffic blue/M-RAL 5017
5140 Turquoise blue/M-RAL 5018
5141 Capri blue/M-RAL 5019
5142 Ocean blue/M-RAL 5020
5143 Water blue/M-RAL 5021
5144 Night blue/M-RAL 5022
5145 Patina green/M-RAL 6000
5146 Emerald green/M-RAL 6001
5147 Foliage green/M-RAL 6002
5148 Olive green/M-RAL 6003
5149 Blue green/M-RAL 6004
5150 Moss green/M-RAL 6005
5151 Olive gray/m-RAL 6006
5152 Bottle green/M-RAL 6007
5153 Brown green/M-RAL 6008
5154 Fir green/M-RAL 6009
5155 Grass green/M-RAL 6010
5156 Mignonette green/M-RAL 6011
5157 Dark reen/M-RAL 6012
5158 Thatch green/M-RAL 6013
5159 Olive yellow/M-RAL 6014
5160 Dark olive/M-RAL 6015
5161 Turquoise green/M-RAL 6016
5162 May green/M-RAL 6017
5163 Yellow green/M-RAL 6018
5164 White green/M-RAL 6019
5165 Chromediox green/M-RAL 6020
5166 Paleg reen/M-RAL 6021
5167 Olive brown/M-RAL 6022
5168 Traffic green/M-RAL 6024
5169 Firn green/M-RAL 6025
5170 Opal green/M-RAL 6026
5171 Light green/M-RAL 6027
5172 Pine green/M-RAL 6028
5173 Mint green/M-RAL 6029
5174 Signal green/M-RAL 6032
5175 Chipmunk grayM-RAL 7000
5176 Silver gray/M-RAL 7001
5177 Olive gray/M-RAL 7002
5178 Moss gray/M-RAL 7003
5179 Signal gray/M-RAL 7004
5180 Mouse gray/M-RAL 7005
5181 Beige gray/M-RAL 7006
5182 Khaki gray/M-RAL 7008
5183 Green grey/M-RAL 7009
5184 Tarpaulin gray/M-RAL 7010
5185 Steel gray/M-RAL 7011
5186 Basalt gray/M-RAL 7012
5187 Brown gray/M-RAL 7013
5188 Slate gray/M-RAL 7015
5189 Anthracite gray/M-RAL 7016
5190 Dark gray/M-RAL 7021
5191 Umber gray/M-RAL 7022
5192 Concrete gray/M-RAl 7023
5193 Graphite gray/M-RAL 7024
5194 Granite gray/M-RAL 7026
5195 Stone gray/M-RAL 7030
5196 Blue gray/M-RAL 7031
5197 Rhinestone gray/M-RAL 7032
5198 Cement gray/M-RAL 7033
5199 Yellow gray/M-RAL 7034
5200 Light gray/M-RAL 7035
5201 Platina gray/M-RAL 7036
5202 Dust gray/M-RAL 7037
5203 Agate grijs/M-RAL 7038
5204 Quartz gray/M-RAL 7039
5205 Traffic gray 1 A/M-RAL 7042
5206 Traffic gray 2 B/M-RAL 7043
5207 Green brown/M-RAL 8000
5208 Ochre brown/M-RAL 8001
5209 Signal brown/M-RAL 8002
5210 Loam brown/M-RAL 8003
5211 Copper brown/M-RAL 8004
5212 Hind brown/M-RAL 8007
5213 Olive brown/M-RAL 8008
5214 Nut brown/M-RAL 8011
5215 Red brown/M_RAL 8012
5216 Sepia brown/M-RAL 8014
5217 Chessnut brown/M-RAL 8015
5218 Mahogony brown/M-RAL 8016
5219 Chocolat brown/M-RAL 8017
5220 Gray green/M-RAL 8019
5221 Dark brown/M-RAL 8022
5222 Orange brown/M-RAL 8023
5223 Beige brown/M-RAL 8024
5224 Pale brown/M-RAL 8025
5225 Terra brown/M-RAL 8028
5226 Cream white/M-RAL 9001
5227 Gray white/M-RAL 9002
5228 Signal white/M-RAL 9003
5229 Signal black/M-RAL 9004
5230 White aluminium/M-RAL 9006
5231 Aluminium gray/M-RAL 9007
5232 Purew hite/M-RAL 9010
5233 Graphite black/M-RAL 9011
5234 Traffic white/M-RAL 9016
5235 Papyrus white/M-RAL 9018
5236 To Auto snap
5237 Distance to element
5238 Recently loaded files
5239 Transparency in percent
5240 by hatch and pen
5241 by material
5242 multi layered
5243 Pen colour selection direct entry
5244 Pen colour selection from list
5245 Line type direct entry
5246 3D-colour selection direct entry
5247 3D-colour selection from list
5248 Define 3D
5249 Free form surface
5250 Base plane defined by
5251 Height
5252 Top plane defined by
5253 Rotation type
5254 symmetric
5255 parallel
5256 undefined
5257 3D-Object parameters
5258 Colour selection direct entry
5259 Colour selection by table
5260 base height
5261 top height
5262 Start angle
5263 End angle
5264 Rounding radius
5265 3D-Objects
5266 Please enter a colour number larger than 0!
5267 Please enter a number!
5268 3D-disabled
5269 3D-enabled
5270 Arc parameters
5271 At text balloon
5273 multiple copy
5274 horizontal
5275 vertical
5276 direct
5277 no tolerance
5278 Tolerance type 1
5279 Tolerance type 2
5280 Tolerance type 3
5281 Diameter
5282 M/cm/mm measuring
5283 Type of input
5284 Relative parallel distances
5285 Absolute parallel distances
5286 Top left
5287 Top centre
5288 Top right
5289 Centre left
5290 Centre centre
5291 Centre right
5292 Bottom left
5293 Bottom centre
5294 Bottom right
5295 Distances
5296 Number of repeats
5297 parallel auxiliary-lines with relative distance
5298 parallel auxiliary-lines with absolute distance
5301 NURBS begin
5302 NURBS end
5303 NURBS close
5304 to terrain property bar
5305 Curve/Height line
5306 Delete point
5307 Delete curve
5308 X-coordinate
5309 Y-coordinate
5310 Z-coordinates
5311 NURBS
5312 New point
5316 View mode - with structures
5317 Excavation mode - without excavation
5318 Excavation mode - with excavation
5319 Terrain options
5320 Generate
5321 Save reference terrain
5322 New definition point
5323 New height line
5324 Excavation
5325 Landfill/dispersal
5326 Road
5327 Street
5328 Outer contour
5329 Height marker
5330 Height line on
5332 Text alignment - left justified
5333 Text alignment - centred
5334 Text alignment - right justified
5335 Text reference point - top left
5336 Text reference point - top middle
5337 Text reference point - top right
5338 Text reference point - centre left
5339 Text reference point - centre middle
5340 Text reference point - centre right
5341 Text reference point - bottom left
5342 Text reference point - bottom middle
5343 Text reference point - bottom right
5345 Storey
5347 Hide
5348 Copy parameters
5349 %d. point or tangential element?
5351 Mono
5352 Copy
5354 Multiple layers
5355 Multiple parts
5356 Circle with given centre and radius
5359 add
5360 subtract
5361 multiply
5362 divide
5363 Bracket open
5364 Bracket close
5365 Select all
5371 Height dimension (H):
5372 Width dimension (O):
5376 Height (B):
5377 Inclination angle (C):
5379 Width (W)
5380 Descent angle (A):
5381 Floor
5382 Extended
5386 Save/Load
5387 Work parameters
5388 Development
5389 Save modifications and close mask
5394 Resolution
5395 Shadow
5396 Draw contours
5398 Set ...
5399 Objects, that cast no shadow...
5400 Objects, that receive no shadow...
5401 minimal
5402 normal
5403 good
5404 very good
5405 maximal
5406 Cast no shadow
5407 Receive no shadow
5408 Terrain parameters
5409 Surface parameters
5412 File parameters
5413 Thickness
5415 Automatic update
5416 Height line parameters
5417 Distance:
5418 Text on each
5419 Height line
5420 Text:
5422 Low
5423 High
5424 Best quality
5425 Occlusion Culling
5426 Number of steps
5427 Copy/move
5428 Modify copies sim.
5429 Correct dimension angle
5430 Correct hatches
5431 Correct text (rotation/mirror)
5432 Correct dimension value
5434 Selection using group/class/level
5436 Opening contour
5437 Room contour
5438 Wall axis
5440 Selection
5442 Handles
5443 rectangular
5444 isometric
5445 Number of colours
5446 Highlight active object by
5447 Use OpenGL
5448 Two sided lighting
5449 Occlusion culling
5450 Rubberbanding
5451 Image resolution
5452 Show line width
5453 Windows True-Type-Fonts
5454 Box mode
5455 Reference point alignment
5456 right
5457 upwards
5458 Rotate reference system
5459 Show coordinates
5460 Dimensioning coordinates
5461 X,Y
5462 X,Y,Z
5463 X,Y X,Y
5464 Storage directory
5465 Show parameter read mode
5466 Value
5467 Extendended model info
5468 Supplemental scaling switchable
5469 Gamma hiddenline
5470 Show points
5471 Path
5472 Number of work copies
5473 Number of functions used
5475 Work copies
5476 Include views in save
5477 Reorganize reference points
5478 No automatic work copy
5479 Save after x actions
5480 Remind after x actions
5481 VDA-FS
5482 DXF-Parameters
5483 VDA-FS Parameters
5484 User units
5485 [nm]
5486 Draw mode
5488 m
5489 rad
5490 deg
5491 gon
5492 Free
5493 Corner with parallel contour
5495 Confirm delete
5496 Work in parallel work planes
5497 Hatch to contour model
5498 Branching at point
5499 Branching at T-junction
5500 Branching at section
5502 Name for \"New file\"
5503 Master drawing
5504 <no>
5505 Project
5506 Write protect during simultaneous save
5507 Drawing file extension with .d
5508 Project group
5509 Catchwords
5510 Bill of material
5511 Table output
5512 graphic
5513 Text file
5514 Excel
5515 Language
5516 Hardware
5520 Text and hatching first, when printing
5521 German
5522 English
5523 French
5524 Prompt when refreshing
5525 Automatic hiddenline printing
5526 Export 2D-data
5527 Create new views as 2D-views
5528 Architecture work parameters
5529 Generate roof sections at once
5536 Refresh after move/copy
5537 Section planes\n frame
5538 Section plane cross
5539 Truss
5546 To be able to show the interfaces parameters,\nthe options dialog mask must be closed first.\nWould you like to SAVE the modifications made?
5547 Transfer parameters to which object?
5548 Modify detail
5549 Layer not available!
5550 Layer not available!
5551 Select layer. ENTER = active layer
5552 Select part. ENTER = end
5553 Select layer. ENTER = end
5554 Syntax error
5555 New filter
5556 new filter
5557 Insert view
5558 Move view
5560 Rotate view
5563 true
5564 yes
5565 Curve by coordinates
5577 Function with part selection not possible.
5580 -- ATTENTION! --- ALL ATTRIBUTES TAKEN! --- ATTENTION! --
5581     PURGE ATTRIBUTES IN THE DRAWING!
5582 -- ATTENTION! --- ALL ATTRIBUTE VALUES TAKEN! --- ATTENTION! --
5583     PURGE ATTRIBUTE VALUES IN THE DRAWING!
5584 Copy selected value from list
5585 Delete list
5586 Make selection first!
5587 AutoCAD 2004 - 2006
5588 Draw line
5589 Draw arc
5590 Draw circle
5591 Auxiliary-geometry line
5592 Auxiliary-geometry circle
5593 Modify-3D
5594 3D-1
5595 3D-2
5597 Only multiples of 90 possible
5598 CATIA V4
5599 CATIA V5
5600 STEP
5601 Modify arrow parameters
5602 Modify dimension parameters
5603 Modify parameters all dimension text in image
5604 Modify dimension text
5605 Terrain generation only possible in design model view!
5606 Model was activated.
5607 Objects of a different type were selected!
5609 Contour selected is not part of terrain!
5610 Perimeter contour not yet defined!\nThe reference terrain cannot be created!
5611 Remove view %s from plot?
5612 Delete detail contour
5613 Delete section definition line?
5614 X-offset cannot be 0\n will be reset to 1
5615 X-offset cannot be negative\nwill be replaced by absolute value
5616 Y-offset cannot be 0\n will be reset to 1
5617 Y-offset cannot be negative\nwill be replaced by absolute value
5618 active layer is invisible
5620 active layer can not be made invisible!
5621 Layer <%s> in filter <%s> deleted!
5622 <%d> unavailable layers in filter deleted!
5623 Save all storeys
5624 Load all storeys
5625 without storey
5626 Storey manager-action
5627 Layer allocation
5628 Layer at model <%d> modified to <%s>!
5629 Show all storeys
5630 no representation level
5632 Quantities
5633 Modify colour globally
5634 Inclination angle [>0 and<=90 degr]
5635 Do not renew shadows
5636 Z-offset:
5637 Excavation hatch
5639 2D-arc\nsegmentation
5642 Reference
5644 FFL##Finished Floor
5645 TF CS##Top Face Ceiling Slab
5646 FFL ... Finished Floor Level\nTF CS ... Top Face Ceiling Slab
5647 Add drawing comment to project selection
5648 Calculation with hardware support
5649 Generate 4 views with title
5650 Display docu-text
5651 ATTENTION: There are reference buttons on other toolbars!\nDeleting these lists will also delete the same buttons on other reference lists.\n\n CONTINUE to DELETE this Toolbar?
5652 Toolbars cannot be exported to the pal folder of the elitecfg directory!\nPlease select another target folder.
5653 Customize...
5655 ATTENTION: This view only contains objects from the current image.\nNewly created objects will not be shown in the view!
5656 New vector shadow
5657 ATTENTION: No terrain codeword! (max. %i actions)
5658 No terrain codeword available!\nTerrain editing not possible
5659 Further modification not allowed
5660 %d. point (ENTER = continue)
5661 Delete surfaces
5662 Object selected does not support function!
5663 No object selected - function not executed!
5664 HIGHLIGHT
5665 Insert image
5666 Insert symbol
5667 Insert library part
5668 Move points and curves in Z-direction
5671 Proj:<$PROJECT> Struct:<$BUILDING>  Storey:<$STOREY>  File:<$F_PATH>
5672 3D rotate/move
5673 Delete content of Info window
5674 Parallel planes
5676 Czech
5677 Dutch
5678 Italian
5680 Path for projects:
5684 TTF text of wersion 8 are being converted
5701 WARNING: %s-section not found...
5702 File exists. OVERWRITE it (y/n)?
5703 Block %s not defined!
5704 Line type %s not defined!
5705 Terminated with %d error!
5707 File %s could not be opened!
5708 Name of %s-file to load:
5709 Name of %s-file to save:
5710 R E A D Y ...
5712 Draw ...
5713 No section found!
5714 End of file before logical end -> ERROR!
5715 Drawing parameters being loaded ...
5717 Direct recursive INSERTs of Block %s.
5718 INSERT ignored!
5719 WARNING: Indirect recursive INSERTs of Block %s.
5720 WARNING: Dimension line %s could not be placed
5721 DXF Colour %d unknown, set to pen %d.
5728 ATTENTION: Dimension line %s was created as normal line!
5729 ATTENTION: Dimension line %s was not created!
5730 DXF infill colour %d unknown, to infill colour %d.
5731 Attribute value %s (attribute %s) could not be placed!
5732 Cannot create protocol file \'%s\'!
5733 DATE
5734 saved successfully!
5735 loaded successfully!
5736 Attribute layer is not defined!
5737 No DXF style assigned to font %d
5738 No character length table for font %s (%s)
5739 Characters with code %d not in font %s!
5740 Characters with code %d not in CAD font %d!
5741 faulty DXF text reference point: %d
5742 DXF 3D available as of ACAD version 11/12!
5743 CAD infill colour %d unknown, set to infill colour %d.
5744 Invalid contour, hatch ignored!
5745 Too few elements in hatch contour (%d)!
5746 Hatch contour is bisecting itself!
5747 Hatch contours are bisecting themselves!
5748 Invalid text alignment. (%d=%d)!
5749 DXF file read at %d%% ...
5750 Coordinates X=%lf, Y=%lf
5751 Text size too small! Text was not created!
5752 Hatch model %s was created as standard hatch!
5753 Save DXF not possible in Education version!
5754 ATTENTION: Illegal element of type %d!
5755 Error generating ACIS part!
5756 Error saving file %s!
5758 Version: %s
5759 Too much values for %s
5760 %s mode active
5761 Colour attribute
5764 Matrix - X%lg Y%lg Z%lg
5765 DXF-save from ELITECAD Viewer not possible!
5766 DXF-save in DEMO mode not possible
5768 Cut-out##DXF
5769 DXF layer
5774 Images will be exported as JPG and not as TIF, because file format < DXF-2007
5775 Layers will be used from template file %s.
5776 Layer %s is not defined in template file!
5778 ATTENTION: Image %s was not created!
5779 Loading 3d data ...
5780 Please check the result!
5781 Corrected file(s):
5782 Corrupted file(s) was (were) corrected automatically.
5800 Scale:                  %f
5802 START - section being loaded
5803 GLOBAL - section being loaded
5804 DIRECTORY ENTRY - section being loaded
5805 PARAMETER DATA - section being loaded
5806 TERMINATE - section being loaded
5808 Name of IGES files to loaded:
5809 File %s could not be opened!
5811 Syntax error! See log %s
5812 End of file before reached -> TERMINATED!
5813 Missing data! See log %s
5814 Parameter division sign: \'%c\'
5815 Record division sign:    \'%c\'
5816 Sender system:           \'%s\'
5817 Original file name:      \'%s\'
5818 System ID:               \'%s\'
5819 Preprocessor version:    \'%s\'
5820 Bits for integers:       %d
5821 Max. Exponent Single:    %d
5822 Mantissa Single:         %d
5823 Max. Exponent Double:    %d
5824 Mantissa Double:         %d
5825 Recipient:               \'%s\'
5829 C A N C E L L E D by user.
5830 C A N C E L L E D because of error %d.
5831 R E A D Y . . .
5832 Continuance line for %c %d does not exit!
5833 ** For parameters from %c %d, position %d no default-value allowed!
5834 ** Division sign %c or %c expected: %c %d, position %d!
5835 ** Number expected: %c %d, position %d
5836 ** Numbers cannot cross line boundaries!
5837 ** Syntax errors in %c %d, position %d!
5838 How many mm in one unit %s?
5840 Unit:                	%d=%s
5841 Line Weight Gradation: %d
5842 Max. line width:     	%e
5843 Date,time:           	%s
5844 Max resolution:      	%e
5845 Max coordinates:     	%e
5846 Author:               \'%s\'
5847 Organisation:         \'%s\'
5848 IGES version:        	%s
5849 Norm:                	%s
5850 End reached. %d S, %d G, %d D, %d P lines per section.
5851 ** Directory entry error - line!
5852 ** Parameter data error - line!
5854 ** Colour (%6.2f%% R, %6.2f%% G, %6.2f%% B) to pen %d.
5856 ** Type %d, Form %d not implemented!
5857 Ellipse not possible!
5858 Drawing being checked ...
5859 Name of IGES file to save:
5860 File exists. Overwrite it (y/n)?
5861 Error when saving!
5862 START - section being saved.
5863 GLOBAL - section being saved.
5864 DIRECTORY ENTRY - section being saved.
5865 PARAMETER DATA - section being saved.
5866 TERMINATE - section being saved.
5867 This file was created from an ELITECAD drawing by
5868 IGESOUT processor %s from XEOMETRIC.
5869 Compressed IGES-Format not readable!
5870 Drawing being checked (%d%%) ...
5871 Draw (%d%%) ...
5873 DIRECTORY DATA - section being loaded (%d%%).
5874 PARAMETER DATA - section being loaded (%d%%).
5875 Description:
5876 ** Scale needed to large. Try 1:%d!
5879 ** Colour %d unknown, will be pen %d!
5880 ** Non-regular dimension  (CAD200?), written as lines and text.
5881 ** Text longer than 80 characters will be truncated!
5882 ** Truncated text = %s
5883 DIRECTORY ENTRY-section being saved (%d %s).
5884 Preparing data loaded from file ...
5885 ** Line width %d not defined, to pen %d!
5886 ** Linear dimension (DE=%d) cannot be converted. Drawn as arrows and text.
5888 ** Radial dimension (DE=%d) cannot be converted. Drawn as arrows and text.
5889 ** Ordinate dimension (DE=%d) cannot be converted. Drawn as arrows and text.
5890 ** Diameter dimension (DE=%d) cannot be converted. Drawn as arrows and text.
5891 ** Angle dimension (DE=%d) cannot be converted. Drawn as arrows and text.
5892 ** Type 402 not activated, no further actions.
5893 ** Type 402 not activated, DE=%d no further actions.
5894 ** No drawing of points outside of the format!
5895 ** Error in default file %s in record:
5896 ** Text slant of \'%s\' was truncated on the min/max value.
5897 Of type %d %4d entities were loaded.
5898 Of type %d %4d entities were saved.
5899 Of type %d %4d entities were loaded (not implemented).
5900 ** Dimensions cannot be converted,
5901 ** and will be drawn as arrows and text.
5902 ** Texts longer then %d characters were truncated!
5903 ** Dimension (DE=%d) does not represent the IGES norm (not enough arrows?)
5951 Design-model date and - time %s
6000 Show help
6001 Copy active parameters to the defaults
6002 Copy defaults to active parameters
6003 De-activate object lock
6004 Directory for\nuser settings
6005 ACIS Hidden line
6006 user defined
6007 AR-Object
6008 Only partially possible.
6009 Not possible.
6010 Reconstruct copies
6011 Modify text globally
6012 Attribute could not be modified!
6013 Classification could not be modified!
6014 Attributes could not be modified!
6017 Save hidden line result (%d points)
6018 --- Hiddenline
6019 --- Hiddenline BSP %d/%d
6020 --- Hiddenline total: %g sec
6021 Error at volume section
6022 Reset user settings
6023 All personal settings and parameters will be deleted!!\n\nDo you want to continue?
6024 Reset
6025 All personal settings (toolbars, positions) will be discarded and the original settings restored!
6026 This will delete NO parameter records!
6027 Restart ELITECAD to apply the modifications!
6028 Do you want to end this ELITECAD session?
6029 Reset all personal toolbars
6030 Personal user interface settings will be reloaded\nSituation since last start-up or since last store of the settings
6031 Restore installation situation of user interface
6033 Part selection mode
6034 Greyscales...
6035 Colour values...
6036 Pen view...
6037 Set values
6038 Hatch contour to model
6039 Convert which hatch contour into the active model?
6040 Replace hatch contour?
6041 Replace which hatch contour with the active model?
6042 Hatch contour was modified
6043 Reorganize which hatch contour?
6044 Reorganising hatch contour
6045 Hatch contour has been reorganized
6046 Preview...
6047 You have more than one network-adapter within the system.\nPlease point out which adapter should serve as a control for codeword checking.\n\n ISDN, WLAN and Modem are not considered valid network adapters.
6048 Ethernet adapter selection
6049 This toolbar file is more current than the locally used 
6050 Replace local toolbar by new one
6051 Replace all local toolbars by new ones (recommended)
6052 Add new toolbar
6053 Add all new toolbars
6054 Ignore
6055 Ignore all
6056 Continue
6058 No.:
6059 Invalid codeword!
6060 Pre setting for part selection mode
6061 Drawing the contour
6062 Convert hatch to elements
6063 Show slope
6064 Backspace
6065 Num 0
6066 Num 1
6067 Num 2
6068 Num 3
6069 Num 4
6070 Num 5
6071 Num 6
6072 Num 7
6073 Num 8
6074 Num 9
6075 Num *
6076 Create shadow
6077 The directory %s does not exist.
6078 Modify your choice please.
6079 Directory error
6080 Create it?
6081 Creating directory
6082 Projects:
6083 Working copies:
6084 Temporary\nfiles:
6085 by network adapter
6086 by dongle
6087 Path for
6088 Codeword check
6089 Path for\nwork copies:
6090 Hatch to active model
6092 Path for\n temporary files:
6093 Text alignment - justified
6094 Following files could not be opened!
6095 The following user interface file possibly has a defect and could not be imported!
6096 An error occurred while importing file!
6097 delete which bitmap?
6102 New terrain edge/area
6108 Global modify all arrows in view
6109 Text search/replace
6110 Globally replace all text parts in view with new text part
6115 Select the scale of the output: (1/x)  x=
6116 Centre for zoom?
6117 Distance?
6118 All slopes are being smoothed...
6119 The reference terrain will be deleted as well.
6120 Terrain edge/area
6121 Use terrain colour
6122 Delay with property list
6123 Seconds
6124 RE-load all storeys
6125 Create installation state for user interface
6126 Memory limit for graphics display
6127 MB
6128 GB
6129 ATTENTION!\n\nIt is assumed you have loaded all desired toolbars and restarted ELITECAD subsequently!
6130 Following setting were used for the installation parameters:\n\n* All active toolbar files\n* The active pal.reg file.\n* The active config.val
6131 Please check wether all user interface standard settings have been replaced by the settings just loaded!\n Please verify that the active user interface has been set according to your needs,\nand that all toolbars have been exported!
6132 Following files have just been generated:
6133 Existing files will get a \'_save\' or \'_orig\' extension.
6134 Are you sure to want to create a new installation basis?
6135 Following file already exists!
6136 Do you want to enter the new file name or discontinue the new installation?
6137 File name of the toolbar (without file extension)?
6138 The restoration of the installation parameters has failed!
6139 The process was discontinued.
6140 An error occurred while copying the local toolbar files to HD_U-directory!
6141 An error occurred when exporting the registry key!
6142 An error occurred when creating the config.val file!
6143 The creation of the installation parameters has been completed successfully!
6144 To finalize the modifications it is advised to shut down ELITECAD!
6145 One toolbar file has been deleted in runtime.\n The reset to original installation has been cancelled for security reasons!\n Please shut down ELITECAD and restart the operation if needed.
6146 Offline
6147 ATTENTION: Not enough memory for graphics display!
6148 The graphics resolution was reduced by a factor %d!
6149 Lower radius?
6150 Upper radius?
6151 Height?
6152 3D colour?
6153 Reference points (1-9)?
6154 Side length?
6155 Slant angles triangles / Prisms
6156 GIVEN:
6157 all 3 edges
6158 2 edges, enclosed angle
6159 1 edge, two abutting angles
6160 TRIANGLE TYPE please?
6161 Edge a?
6162 Edge b?
6163 Edge c?
6164 ALPHA angle?
6165 BETA angle?
6166 Length, width?
6167 Smallest radius (top or bottom)?
6168 Largest radius (middle)?
6169 Chord?
6170 Height of vault?
6171 Calculation
6172 Preset for new objects
6173 use object dependant parameters
6174 Threshold for\nsmall radii
6175 use global parameters
6176 optimal
6177 ATTENTION: Solid view will not be printed!
6178 Name %s in use!
6180 Info window on/off
6181 Export VRML 2.0 image
6182 VRML 2.0 image without perspective leads to undefined standpoint.
6183 per storey
6184 Path for\nuser settings
6185 Administrate user settings over the network
6186 Network path for\nuser settings
6187 Administrate parameter presetting over the network
6188 Network path for\nparameter pre-settings
6189 Local path for\nuser settings
6190 ATTENTION: Path for user settings is a network drive!
6191 This can lead to a considerable performance loss!
6192 Continue?
6193 Error when writing to the registry!
6194 Wrong network path for parameters pre-setting!
6195 ELITECAD configuration
6196 include sub objects (f.i. windows) in modify
6197 Parameterised objects in block!
6198 Synchronise class with layers
6199 Switching the clipping not possible!
6200 Define cut-out
6201 restore previous filter
6202 Export filter?
6204 reorganized
6205 Numeric error in design-model. Correct and save?
6206 Zoom-Plot
6207 Zoom-Format A4
6208 Zoom-Format A3
6209 Select single dimension
6210 Drawing (CAD-Start)
6211 Filter was modified
6212 Retain active filter
6216 Views management
6217 Representation level parameters
6219 Layer management
6220 Scale
6221 Select view
6222 Select layer
6224 Select representation level
6225 End of file %s missing (File: %s)
6226 Interlis import requires a pair common named .ILI and .ITF files
6229 DXF - TRANSFER
6230 Selected configuration:
6231 DXF / DWG - IMPORT
6232 DXF / DWG - EXPORT
6233 Selection:
6235 DXF/DWG Export
6236 Data source
6237 DXF/DWG Import
6238 File selection - DXF/DWG
6239 File selection
6241 Select folder
6242 Content:
6243 New list
6244 All >>
6245 Append >
6246 Delete <
6247 All <<
6249 File selection - ELITECAD
6252 read
6253 No files selected
6255 File format
6256 DXF/DWG
6257 DXF/DWG Transfer
6258 DXF/DWG Interface
6260 further CAD-layers of all views
6261 %d invisible and invalid arcs recreated!
6263 2D-display
6264 3D-display
6265 3D tree still contains errors!
6266 Surface to delete. Re-assign?
6267 Re-assign
6268 Re-assignment finished.
6269 Edit operation
6270 3D tree check finished
6271 Model #%d cannot be generated
6272 Operation cannot be calculated: %s
6273 Allocation error: %s
6274 Parts of the selection are hidden!
6275 Use visible selection only
6276 Use invisible selection as well
6277 as decimal value with active unit
6278 Text slant (30150)
6280 Invert all elements
6281 Activate all elements
6291 Switch to tree view
6292 Switch to list view
6293 Switch to selection
6294 Modify creation filter
6296 Copy selected classification
6297 Copy all selected classifications
6298 Model not selected!
6299 Tip: Keep <Ctrl> depressed to copy chosen classification.
6300 All selected classifications were copied.
6301 Selected classification has been copied.
6302 No new classifications were copied.
6303 Directory+Sub dy.
6304 First record
6305 Previous record
6306 Active record
6307 Next record
6308 Last record
6309 Description
6310 created
6311 modified
6312 Really delete file?
6313 Model has no 2D elements.
6314 Fillet surfaces
6315 This function not available in AR-S version!
6316 ELITECAD AR-S limit reached (%s)!
6317 File for list
6318 Select folder where to start search
6319 ELITECAD 3D BASIC
6320 ELITECAD Student
6321 ELITECAD 2D Basic
6322 ELITECAD 3D AR-S
6324 EDM
6325 Standard parts basis
6326 Standard parts plant construction
6327 Standard parts machine building
6328 Reduced standard parts basis
6329 Electro installation module
6330 Heating module
6331 Sanitary-module
6332 IFC interface
6333 CATIA interface
6334 VDA interface
6335 IGES interface
6337 Standard parts bearings
6340 Terrain module
6341 STEP interface
6342 Choose format: A3 (3) or A4 (4)
6343 Floating license:
6344 Name of toolbar
6345 Enter name of new toolbar
6346 File for toolbar
6348 DXF add-on
6349 One of the options is limited in AR-S
6353 Delete view model beforehand?
6354 View window (%s) being filled
6355 No view window found in design model!
6356 No view window found in paper range!
6357 Template and save target cannot be identical!
6358 Templates
6359 Template for Excel bill of material
6360 Link failure with Excel!
6361 Excel template invalid!
6362 Error when creating the bill of material!
6363 Temporary file cannot be created!
6364 Template file invalid!
6366 Terminated operation cannot be undone
6367 Dimension position (%s)?
6368 Text position (%s)?
6369 Arc position (%s)?
6370 Dimension position (%s), [ENTER] = same?
6372 Delete tolerance value
6375 Error: Memory limit for graphics display exceeded!
6376 View##viewports
6378 Display Redlining
6379 Drawing contains redlining objects
6380 License server / local codeword conflict!
6393 Save display list in view
6394 Read mode
6395 user first
6396 global first
6397 user only
6398 global only
6399 NO authorisation for delete!
6400 Insert where?
6401 to layer group
6402 within layer group
6403 TIP: Zoom-format in plot not possible!
6404 SAT files (ACIS V%d)
6406 Delete reference plan
6407 with projectname
6409 The interface has not been installed correctly.
6410 Modify visibility with "Show all"
6412 show used layers only
6413 Layer \'%s\' is locked!
6414 Layer \'%s\' is invisible!
6415 No floating license for TERRAIN available!
6416 used layers are locked!
6417 on active layer
6418 Draw## Polygon
6419 Modification to toolbar files
6420 Operation on original definition
6421 Unlock
6422 Lock
6423 Active layer cannot be locked
6424 Reference plan
6426 Entry of text slant
6427 Save mode##for reference plan
6428 Print in single colour
6429 do not include in save
6430 always include in save
6431 query for inclusion in save
6434 Dimension text has been re-assigned##from data purge
6435 Dimension repaired##from data purge
6436 Arrow type modified##from data purge
6437 Include reference plan in save?
6438 Position reference plan
6439 Delete displayed objects only?
6440 Standard, rounded
6441 complete drawing
6442 visible selection
6443 %d empty models deleted
6444 No empty models found!
6445 Menu selection
6446 Temporary file being copied
6447 An error occurred while copying temporary file!
6448 Copied file being loaded
6449 An error occurred while loading copied file!
6450 file copy successfully
6451 Load testing successfully ended
6452 Load testing failed ended
6454 *OK
6456 Show delete filter
6457 Number:
6458 Licence server
6459 No License server installed!\nLicense server codeword entry will now quit.
6460 unfavourable work plane for floor plan!
6461 generate anyway?
6462 Dim. Pen
6463 Arrow tip
6464 Font
6465 Vector
6466 Text pen
6467 Text slant (-6060)
6468 Character height (0.011000 mm)
6469 Character width (01000 mm)
6470 0-suppression
6471 Dimension depiction
6481 Suppress FEET depiction
6482 Diameter character
6483 none
6486 Tolerance type
6487 without
6488 asymmetric
6489 Font type TT
6490 Character set TT
6491 Font TT
6492 Text pen TT
6493 Text slant TT (-6060)
6494 Line spacing TT(1.02.5)
6495 Character spacing TT (1.02.5)
6496 Character height TT (0.011000 mm)
6497 Character width TT (01000 mm)
6498 Bold TT
6499 Italic TT
6500 Underline TT
6501 Cross out TT
6502 Tolerance rounding
6503 1/2 cm
6504 Point at numbers >= 100
6505 Arrow length (mm)
6506 Arrow width (mm)
6507 Circle radius (mm)
6508 Dash length (mm)
6509 Dash angle ()
6510 Dash pen
6511 Dimension projection
6512 Text position
6513 Projection of upper auxiliary-lines (mm)
6514 Length of upper auxiliary-line 
6515 Length of lower auxiliary-line
6516 Distance of auxiliary-line (mm)
6517 Dimension line projection (mm)
6518 Radius auxiliary-line
6519 Dimension line depiction
6520 Start on reference-line
6521 Start with distance
6522 Fixed dimension line length
6523 Dimension line distance (mm)
6524 Distance from reference-line (mm)
6525 Dimension line length (mm)
6526 Horizontal lines 
6527 Without
6528 TTF + Vector
6529 Modify OLE object
6530 Function only executable by OpenGL
6531 Area-render only allowed within views or model-views.
6532 VisMat database files
6533 VisMat text files
6534 Line type definitions
6535 Save external reference (%s)
6536 Load external reference (%s)
6537 Object cannot be lengthened/shortened!
6538 Objects cannot be lengthened/shortened towards one another!
6539 Select 1. object to lengthen/shorten
6540 Select restrictive object for lengthen/shorten
6541 Select 2. object to lengthen/shorten
6542 Select object for lengthen/shorten
6543 The same object has been selected! Please select another one
6544 No section point found!
6545 Error with lengthen/shorten!
6546 Load which object?
6547 No object selected!
6548 Error!
6549 Modify object parameters
6550 Copy object parameters
6551 Copy object parameters to all
6552 Object parameters
6554 Tab distance (mm)
6555 Frame line type
6556 Pixel image: Foreground/Background
6557 Pixel image: Delete transparency
6558 Click colour
6559 ENTER = Enter RGB Values
6560 Enter tolerance (0-100%)
6561 Enter R, G, B, (0-255) and tolerance (0-100%)
6562 Pixel image: determine transparent colour
6563 Pixel image: transparency gradient
6564 Pixel image: export to file
6565 Pixel image: delete from file
6566 - WP -##abbreviation for work plane
6567 - MM -
6568 - 2D -
6569 Select archive folder.
6570 The folder is not empty!
6571 Number of the distances?
6573 Point is not on polygon!
6575 \nTexture for VisMat %s is not available.\n
6576 Further hatch or cut-out? (ENTER = end of hatch)
6578 Length
6579 Lengthen/shorten element
6580 No such library part
6581 Replace which library part?
6582 No such library part
6583 Please select new library part
6584 Cover lines
6585 Deletion lines
6598 Please confirm selection first.
6599 Move which model to foreground
6600 Selection to foreground
6601 In front of which model?
6602 Behind which model?
6603 Print preview is displayed.
6604 Print preview is hided.
6605 Modifying the view direction in standard views is not allowed.
6606 Fixation not copied.
6607 Work copies
6608 Function useable in model view only!
6609 *Active camera*
6610 TIP: Active camera not fixated.
6611 Colour gradient hatch
6612 Gradient type
6613 Linear
6614 Cylindrical
6616 Distance 1
6617 Repetition 1
6618 Distance 2
6619 Repetition 2
6620 Positioning
6622 2. Pen
6623 2. Line type
6624 2. Distance 1
6625 2. Repetition 1
6626 2. Distance 2
6627 2. Repetition 2
6628 2. Positioning
6629 2. Start distance
6630 2. Transparency
6631 Border distance
6632 Centre point
6633 All hatch types
6635 3D Parameters
6637 Switch back to view
6638 Switch back to section
6639 3D Edit mode
6640 Terrain material and colour value
6641 Delete height curve 
6642 Delete height curve point
6643 Modify height curve
6644 Modify height curve pen / line type 
6645 Generate height curve
6646 NURBS-parameters
6647 Delete height point
6648 Modify height point pen
6649 Modify height point
6650 No line type selected!
6651 Import Line type
6652 First line type character cannot be a number!
6653 Line type definition already exists!
6654 Error when importing line type definition!
6655 Export line type
6656 Error when exporting line type definition!
6657 Line type name ambigous
6658 Please change to / enter unique line type name
6659 Error when saving line type definition!
6660 Line type definition was already defined as standard!
6661 Rename line type
6662 Delete standard line type
6663 Deletion of standard line type possible in empty drawing only!
6664 Line type definition not defined as standard!
6665 Error when generating line type definition!
6666 Error when loading line type definition!
6667 Exit edit mode
6668 Loaded line type definition to which position?
6669 Overwrite original
6670 Append to list end
6671 Reject modifications
6672 Error when overwriting the line type definition!
6673 (drawing)
6674 Render model
6685 Take text
6686 From file
6687 Split up
6688 Number on line
6689 Distance on line
6690 Number on polygon
6691 Distance on polygon
6692 Selection to background
6693 Selection in front of model
6694 Selection behind model
6695 Radiosity Update
6697 Please select the target folder
6698 Visualisation materials database will be refreshed automatically!
6699 Insert/Modify a global visualisation material
6700 Delete a global visualisation material!
6701 Not all visualisation material from folder \%s\ could be deleted. Observe (USER/GLOBAL) settings!
6702 Export VisMat
6703 Import VisMat
6704 (Global)
6705 (User)
6706 Replace existing visualisation material?
6707 The database already contains visualisation material \"%s\".
6708 Yes, all
6709 Please select surface.
6710 Remark: No VisMat has been assigned to selected surface.\nDo you want to create a new VisMat with the 3D colour of the surface in the active folder?\n
6711 New material
6712 Flat depiction is not allowed within the filters \'All VisMat\' and \'VisMat database\'. ELITECAD has switched to hierarchic depiction mode!
6713 Remark (once only)\n\nDue to switching to flat materials depiction within the filters\\\n \'All materials\' and \'Materials database\' data load times may be substantially longer!\n\n\\\nDo you want to maintain these filters and switch to flat depiction?
6714 The folder \'%s\' already contains a folder \'%s\'!\n\nProcess has been discontinued.
6715 The folder \'%s\' cannot be copied/moved! The target folder is subordinate to the source folder!
6716 \'%s\' cannot be imported! Unsupported data format.
6717 Up
6718 All VisMat
6719 VisMat database
6720 Temporary VisMat
6721 Object - allocation mode
6722 Model - allocation mode
6723 Surface - allocation mode
6724 Replace - allocation mode
6726 Sort descending
6727 Sort ascending
6728 Hierarchic depiction
6729 Flat depiction
6730 Folder
6731 Add VisMat to surface
6732 Replace VisMat/colour
6734 Add VisMat to 3D-definition
6735 VisMat has been assigned to object.
6736 VisMat has already been assigned to object!
6737 VisMat has been assigned to model.
6738 VisMat has already been assigned to model!
6739 VisMat has been assigned to surface.
6740 VisMat has already been assigned to surface!
6741 VisMat has been assigned to selection.
6742 VisMat has already been assigned to selection!
6743 VisMat has been replaced.
6744 VisMat could not be replaced!
6745 Visualisation material key
6746 Material name
6747 Visualisation material path
6748 Occurrences
6749 Temporary visualisation material
6750 In database (User)
6751 In database (Global)
6752 In drawing
6753 In image
6754 Materials
6755 \nWarning: Line type \"%s\" modified to line type 1\n
6756 Warning: standard line type \'%s\" modified to number %ld
6757 Make modification definite?
6758 Save modified visualisation material in database?\nWhen NO, new drawing visualisation material will be created.
6759 Save modified visualisation material in database?\n When NO, a temporary visualisation material will be created.
6760 Are you sure that the modifications with default values are to be overwritten?
6762 Material
6774 Section depiction
6777 Error when loading external reference (%s)
6778 Error when saving external reference (%s)
6779 Facets-surface
6780 Facets-polygons
6781 NURBS surface
6782 NURBS patches
6783 planar NURBS patches
6784 Ignore UNDO objects?
6785 Ignore copied objects?
6786 --> of which originals
6787 Original surfaces
6788 Original curves
6789 Select object for association with light sources <%s> 
6790 Unsupported ACIS geometry.
6791 Prime size for faceting (active scene)
6792 Number of points
6793 Number of polygons
6794 Number of surfaces
6795 Indicators memory usage (total)
6796 Name of scene
6797 2D model
6798 Entry objects
6799 Element container
6800 Hatch objects
6801 Texts
6802 Dimension objects
6804 Display objects
6805 Storage requirement 2D (KByte)
6809 Trimming curves
6810 3D curves
6811 Info objects
6812 Attribute objects
6813 DsMesh objects  
6814 ACIS memory usage 
6815 Memory usage  3D (KByte)
6816 Memory usage total (KByte)
6818 Select %d. surface to align (ENTER = end)
6820 Surface does not have alignable texture
6821 Alignment info could not be created
6822 Surfaces must have same visualisation material
6823 Surface already has other alignment information. Overwrite?
6824 Modify texture alignment for which surface?
6825 No texture alignment info found. Create new?
6826 Please indicate reference point
6827 Please enter NEW position for alignment point
6828 3DS
6834 Uncompressed facet data
6835 Pull curve
6836 Add height point
6837 Draw height point
6838 Terrain is not up to date. Regenerate?
6841 Min
6842 Max
6843 Range
6845 Range in meters
6846 Light status:\nLeft click : Switch activity\nRight click : Switch activity
6847 Light name:\nLeft click : Select light\nRight click : Edit name
6848 Light type:\nleft click : Switch through allowed types\nRight click : Menu
6849 Light colour:\nLeft click: Select colour\nRight click : Select colour
6850 Light reference:\nLeft click : Switch reference types allowed\nRight click : Menu
6851 Shadow type:\nLeft click : Switch shadow\nRight click : Menu (when shadow is active)
6852 Global properties
6853 Brightness parameters
6856 Scope radius soft shadow
6857 Standard values
6861 Camera relative
6862 Not camera relative
6863 Associated light sources
6864 Soft shadows
6865 Hard shadows
6866 No shadows
6867 standard
6868 solid
6869 white
6870 black
6871 internal
6872 Focal point
6873 Aperture angle
6874 Camera state: Switch projection
6875 Camera name:\nLeft click : Select camera\nRight click : Edit name
6876 Display quality
6877 Print quality
6878 total scene
6879 outside
6880 inside
6881 Render parameters
6882 Alpha transparency
6883 Mirroring, Refraction
6884 Edge smoothing
6885 Texture filter
6886 Use high resolution textures
6887 Bump mapping
6888 Image cut-out
6890 Lighting
6891 Light intensity
6892 Daylight
6894 Refresh automatically
6895 Print auxiliary-geometry
6900 Reduced textures
6901 Save textures as well
6902 Value must be between %g and %g!
6903 Value must minimally be %g!
6904 Value can maximally be %g!
6908 modify
6909 copy
6913 >>
6914 New folder
6915 Large symbols
6916 Small symbols
6917 List
6918 Folder shown in list
6919 Texture preview
6920 Bump map preview
6921 Create copy of VisMat
6922 Create copy of folder
6923 Create copy of selected objects
6924 Create VisMat copy in database
6925 Save VisMat in database
6926 Save folder content in database
6927 Save selected object in database
6928 Create folder
6929 Export folder content
6930 Export selected objects
6932 Select VisMat by surface
6933 Edit VisMat by surface
6934 Do you really want to delete temporary folder \'%s\'?
6935 Do you really want to delete folder \'%s\' and its total content?
6936 Do you really want to delete visualisation material \'%s\'?
6937 Folder \'%s\' cannot be deleted!
6938 You are not authorised to delete folder \'%s\'!
6939 Visualisation material \'%s\' cannot be deleted!
6940 You are not authorised to delete visualisation material \'%s\'!
6941 Visualisation material properties
6942 Folder properties
6943 root
6944 VisMat editor
6945 Before
6946 After
6947 Automatic refresh
6948 Effects selection
6949 Torus
6950 Sphere
6951 Base colour
6952 Mirroring
6953 Wood texture
6954 Bump map
6955 Blue screen
6957 Lights
6958 All parameters
6959 Dark
6960 Light
6961 Opaque
6962 Transparent
6963 Transparency colour
6964 Base colour part
6965 Matte
6966 Mirroring
6967 Mirroring colour
6968 Bright
6969 Highlight expansion
6970 Highlight colour
6971 Light colour
6972 Use drag and drop to drag material into field!
6973 Category:
6974 Empty
6975 Colour from screen...
6976 M-NCS selection
6977 Red
6978 Green
6979 Blue
6980 M-NCS
6981 M-RAL
6982 RGB
6983 M-RAL selection
6984 Depth
6985 Division
6986 Delete image
6987 No
6988 Simple
6989 Tri-linear
6990 Tiled
6991 Stretched
6992 No. X:
6993 No. Y:
6994 Maintain XY
6995 Mirror horizontally
6996 Shift
6997 Use existing texture as bump map
6998 Linked to texture
6999 Not linked to texture
7000 Method
7001 align perpendicular to camera and light
7002 Refraction index
7003 Textures manager
7004 Trim texture
7005 Modify texture colours
7006 Gamma correction...
7007 Brightness / Contrast...
7008 Trim
7009 Gamma correction on monochrome textures not possible!
7010 Brightness and contrast modifications for monochrome textures not possible!
7011 Trimming textures with less than 24-bit colour depth not possible!
7012 Gamma correction
7013 Original
7014 Preview
7015 Brightness / Contrast
7016 Brightness
7017 Contrast
7018 Switch to colour mode
7019 Switch to visualisation materials mode
7020 Select material
7021 (Right click => edit material globally)
7022 Edit visualisation material globally
7023 ATTENTION: Visualisation material edit will affect all 3D-definitions!
7029 New object
7030 Model to object
7034 Cancel render
7037 Free entry
7040 Country
7041 Town
7042 Longitude (in )
7043 Latitude (in )
7045 Time difference GMT UTC (CET=+1hr)
7047 North arrow (0 = N, 90 = E)
7049 Height of sun (in )
7050 Azimuth (0 = S, 90 = W)
7051 Sun up
7052 Sun down
7053 Day's length
7054 Set automatically
7057 Section height
7058 Shadow parameters
7060 No material selected
7061 Hatch colour
7062 Visualisation material entry
7063 All active user interface and parameter settings have been exported.\n To complete the export of all data ELITECAD needs to be shut down after!
7064 TIP: in order to be able to export the settings an empty folder is needed.
7065 Please note that when exports are executed with a high screen resolution setting these, when imported on a system with a lower setting, will cause deviancies.
7066 Are you sure all settings are in order and the export can be continued?
7067 Folder?
7068 The export of the settings was successful!
7069 ELITECAD will now shut down. Please restart the application manually if so desired.
7070 An error has occurred during the settings export. The export has been aborted!
7071 All old user interface settings have been deleted and replaced by the imported setting.\nTo complete the import of ALL the setting ELITECAD needs to be shut down and restarted!\n\n Are you sure?
7072 The import of the settings has been concluded successfully.
7073 An error has occurred during the settings import. The import has been aborted
7074 The file\'%s\' could not be loaded. Process has been aborted.
7075 The file\'%s\' could not be saved. Process has been aborted.
7076 The folder you have selected is not empty!\nThe export has been aborted.
7077 The data to export have been created with another version of the CAD system.\nThe import has been aborted!
7078 The data to export have been created from within another discipline.\n the import has been aborted!
7079 The data to export have been created in another language.\n the import has been aborted!
7080 The data to export are incomplete. The import has been aborted!
7081 The active screen resolution (%d x %d) is lower than the resolution (%d x %d) in the exported user interface setting.\nAn import of the data can lead to deviancies.\n\n Do you want to go ahead with the import?
7082 The file \'%s\' could not be loaded, the import has been cancelled.
7083 TIP: The toolbar file (*.pal) for the import could not be located.\nContinue import anyhow?
7084 Texture hatch
7085 Planes uni coloured
7086 Planes on
7087 Planes off
7088 User defined line type
7089 Draw start- and endline
7090 Line pattern contiguous
7091 Scale line pattern as geometry
7092 Import
7093 Edit
7094 Confirm edit
7095 Automatic zoom
7096 Colour mode Printer / Pen
7097 Area render
7100 Covering hatch
7101 Render
7102 Background
7105 Align texture
7106 Edit user defined line type
7107 Create archive
7108 Load archive
7111 Print preview
7112 Links
7113 Edit links
7114 Refresh links
7115 Refresh all links
7116 OLE object
7117 Insert OLE object
7118 Background on/off
7119 Assign transparent colours
7120 Transparency gradient
7121 Delete transparency
7122 export to file
7123 swap from file
7124 Alignment
7125 Lengthen/Shorten
7126 Lengthen/Shorten at corner
7127 Lengthen/Shorten single element
7128 Lengthen/Shorten multiple elements
7129 IFC2x3
7134 STEP
7138 Coordinate system
7141 Object management
7142 Object editor
7143 Detach model from object
7144 Show model higher in tree
7149 Preparing for render
7151 Import user interface settings
7152 Up
7153 Back
7154 TIP: Multiple visualisation material assignment possible with SHIFT, Space or [+]
7155 Assign visualisation material to object?
7156 No object found!
7157 Assign visualisation material to model?
7158 No model found!
7159 Assign visualisation material to surface?
7160 No surface found!
7161 Assign visualisation material to selection?
7162 No selection found!
7163 Replace visualisation material?
7164 No material found!
7165 No selection at active point!
7166 VisMat for delete
7167 VisMat cannot be renamed! VisMat name not allowed!
7168 Removes visualisation materials
7169 SURFACE-REMOVAL OPERATION
7170 SURFACE-DIVISION OPERATION
7171 Surface-division operation
7172 Update render mode in case of camera change
7173 Join texture alignments
7176 as decimal and fraction number for Feet/Inch one line
7177 as decimal and fraction number for Feet/Inch two lines
7178 Delete texture alignment for which surface?
7179 Surface has no texture alignment info
7180 Remove texture alignment info
7181 3D line objects
7183 Multiple inserted views cannot be activated!
7184 \nElement attributes:\n
7185 Select polygon
7187 Path for a2ps.exe
7188 A2PS being started.
7189 A2PS cancelled.
7191 Path for gswin32c.exe/gswin64c.exe
7192 Ghostscript being started.
7193 Ghostscript cancelled.
7194 Invalid directory for PDF bill of material!
7195 Invalid example files for bill of material!
7196 Bill of material cannot be generated!
7197 A PDF file cannot be generated!
7198 Unknown error!
7199 Please enter 2. point (X-axis) (ENTER for entering angle)
7200 Please wait till render has finished.
7201 Activate sub view %s
7202 De-activate sub view %s
7203 Due to User/global setting new drawing visualisation material is being generated.
7204 Due to User/global setting temporary visualisation material is being generated.
7205 Entry from:
7207 Proprietary height
7208 Project null
7209 Sea level
7218 Define coordinate system
7219 Elements always in foreground
7220 GAMMA-RAY
7221 From version 12
7222 Until version 11
7223 VIS
7224 Internet update
7225 Switch to the view anyway?
7226 Modify text content globally
7227 Regenerate chain dimension
7228 Align texture globally
7229 View name too long!
7230 Image is frozen.
7231 Function not possible!
7232 Remove fixing
7233 Background image not available!
7234 Move background image
7235 Scale background image
7236 RAY
7238 Please select a definition for join facet data
7239 Joining facet data is not necessary here
7240 Facet data is being joined
7241 Shadow distance
7242 Distance for self shadowing
7243 A selection is available.\nAllocation to the active position is not possible!
7301 Click connection point
7302 No connection point found!
7303 Definition of connection point not possible
7304 Connection point already defined
7307 Click model element
7308 No model element found!
7309 Start point (x,y):
7310 Endpoint (x,y):
7312 Number of parallel pipes
7313 Distance between pipes (<0 --> left)
7314 Enter pipe as polygon contour (End = CONTOUR END)
7315 Delete which equipment?
7316 No equipment found!
7317 No pipe found!
7318 Library part defined wrongly
7319 Recess circuits
7320 Recess intersecting circuits
7321 Attribute <%s> can not be selected
7322 Position description where?
7323 Enter position number:
7324 Start point for position description?
7325 End point for position description?
7326 No pipe or component found!
7327 Pipe can not be divided!
7328 Active model is not a pipe!
7329 Copy which parameters to active pipe? ENTER = end
7330 Copy which parameters from pipes in image? ENTER = end
7331 Sea level (act. unit)
7332 0.00 (act. unit)
7333 Attribute <%s> can not be read
7334 (x = remove fixing)
7335 Enter height for heightreference %s
7336 Sealevel (m)
7337 0.00 (m)
7338 Storey (act. units)
7339 Enter height
7340 Filter placed on route
7341 Filter placed on component
7342 Placement error for filter
7344 Insert pipe at which point?
7346 Vertical pipes deleted!
7350 Select area
7351 Area %s selected
7352 Area switched off
7360 Start point for dimensioning?
7361 End point for dimensioning?
7374 No object description available
7375 Multiple object descriptions available
7392 Connection information:
7393 Click connection model
7394 Set to which height (in active units)
7395 Connection points (0: 2D, 1: 3D)
7396 Too many elements end at the same point
7397 Select network
7398 Height info of pipes:
7401 Number container:
7402 Network area:
7403 Active networks\nEquipment/Zone\nString\nGroup
7408 Position similar parts the same way?
7409 Position in direction of load point?
7410 Last position number:
7411 Start position:
7412 End position:
7413 Delete which connection point? (-1=all)
7414 Polygon for position numbers? <CONTOUR END>
7415 Point not on format!
7416 Nothing found
7417 Shift height by? (in active units)
7418 Entry value not valid!
7419 Object %4d will be shifted in height
7420 Height entry (1: relative, 2: absolute)
7421 Delete what? (0: Total point information. 1: Only 3D point info)
7422 Pen/line type of object %4d will be modified
7430 Max. pressure loss (min 50)
7431 Start junction %4d is modified
7432 Fictitious pipe %4d is modified
7451 Appliance filter:
7452 Pipe filter:
7453 Construction part filter:
7454 Component filter:
7455 Start junction filter:
7456 Load point filter:
7457 Vertical piping filter:
7458 Piping and equipment filter:
7459 Component and construction part filter:
7460 Start junction, component and C.part filter:
7461 Piping and component filter:
7462 Piping, equipment and cosstruction part filter:
7463 Equipment and construction part filter:
7481 Flow equipment analysis 
7482 Circuit correction
7483 Equipment analysis cancelled
7492 Discipline and/or Equipment/Zone not active!
7500 Connection points
7501 Reference points
7502 Position points
7503 Text points
7522 No license for buildingservices BASIC available!
7523 No license for buildingservices PROJECT available!
7524 No license for buildingservices PLANNING available!
7525 No license for MULTI FLOOR available
7526 Inner width [mm]
7527 Outer diameter [mm]
7528 Next point (ESC = end)
7529 Select model (ENTER = end)
7530 Select model for centre line (ENTER = end)
7550 J##UB
7551 N##UB
7557 Select objects (ENTER = end)
7558 Components are created as extrudes!
7559 Components are created as boxes!
7560 Window manager inactive
7561 3D not active
7563 A new group is assigned to object %4d
7565 Calculate 3D from route (0: single, 1: All)
7566 Pipe %4d is calculated
7567 Enter circular resolution for 3D parts:
7568 Enter surface colour for 3D parts:
7569 Please click object in another window
7570 Start circuit where?
7571 Next point (or enter %s for HELP)
7574 To which connection
7575 next point: h = Help
7577 Height## Pl
7579 Please enter 3. coordinate for height
7582 h
7594 Enter intended slope [in%] (x=cancel planned gradient)
7597 Load point
7598 Please select the directory where the loadpoint can be found.
7599 Select circuits (ENTER = end)
7800 Enter material for manufactured parts
7801 Calculate 3D from 3D dash (0: single, 1: All)
7802 Manuf. part %4d is being calculated
7804 Macro variable %s is missing
7805 Enter first connection point
7806 Enter second connection point
7807 They must be different models!
7808 Direction of component does not match the connection
7810 No component found!
7812 No construction part found!
7819 Select component
7820 Component %s is being generated
7821 3D is not active!
7823 Attribute %s is missing
7825 Creating 1s component
7826 Creating 3s component
7827 Creating 3d component
7828 Component %s is skipped
7830 Enter point for lengthening?
7831 Click contour model for hidden line
7832 Hatch component...
7833 Hatch circuits...
7834 Reference point in elevation?
7835 Reference point in floorplan?
7836 Z-height of reference point?
7837 Point for direction?
7838 Error when creating components
7839 Error, component creation cancelled
7840 Component creation cancelled
7841 Error when calculating offset
7842 Reference points are not on the same plane
7843 Parameter error in component creation
7844 Form error in component creation
7845 Component connection aborted
7847 Special part##PI
7848 Reference point for placement? {%s}
7849 No connection for placement found
7850 Connection to pipe can not be generated
7851 Select object
7852 Please enter Z-shift or selection.
7853 Point in front/side view
7854 Create centre lines...
7855 No route found!
7856 Mount conn. [%d]/Height %s, [a] next connection, [f] Free {%s}
7858 Connect to which opening?
7859 Windows are not orthogonal to one another
7860 Please click 3. coordinates %s in window, or enter Z <number> 
7862 Enter %s height, or cancel for no height
7863 FLUSH IN UPPER SECTION
7864 CENTRED
7865 FLUSH IS LOWER SECTION
7866 CONNECTION
7867 Click 3. coordinates %s, enter z<number>, [u|m|o] for mount reference
7868 Enter %s height, [u|m|o] for mount reference,CANCEL for no height
7869 EXHAUST OPENING
7870 Structure from active selection (%d models active)?
7871 Click %d connection or ENTER to end
7872 Enter %d height for connection
7873 Which reference point represents connection %d? (1-9)
7874 No model with 3D-definition found!
7875 Hiddenline could not be generated!
7876 Click reference point 5
7877 Enter height for reference point 5
7878 Generate hiddenline as blue (0=invisible in print)?
7879 BELOW
7880 Pipe
7881 Reducer
7882 Elbow##PP
7883 Tee
7884 Cross
7885 Exhaust
7886 Supports
7887 Floor
7888 Tee
7889 End cap/lid
7890 Grille
7891 Duct
7892 Angle##PP
7893 Division##PP
7895 Breech
7896 Breech bearer
7897 Welded elbow
7898 J##PP
7899 N##PP
7900 Cancel Window manager
7902 Delete view model?
7903 Generate view model...
7904 No floorplan window available
7905 View model %4d is being created
7906 Click connection point at inlet cross section
7907 Click most left or top connection point for exhaust
7908 Click next connection point (CANCEL=end)
7909 Generate division?
7910 Click manufacture part at inlet
7911 Component does not match connection point
7913 Hatch construction parts
7914 1. reference point (ENTER = active reference point)
7915 2. reference point (ENTER = no further reference points)
7916 3. reference point (ENTER = no further reference point)
7917 Please click 3. coordinate as reference point in window
7918 Enter height for reference point (ENTER = no height)
7919 Description for reference point
7920 Drop elbow
7921 Click construction part or [ENTER] for automatic
7922 Click component or [ENTER] for automatic
7923 Hatch zones...
7924 No zone found!
7925 Enter height for start height
7926 Click a component in a circuit
7927 %d connection points defined
8000 Building services
8001 Describe which model?
8002 ID?
8003 --> File %s can not be opened!
8004 #PROJ_PHASE
8005 #END_PROJ_PHASE
8006 Project phases defined wrongly
8007 #FACH_BER
8008 #END_FACH_BER
8009 Invalid definition of group
8010 #VAR_UNTER_BER
8011 Installation/Zone of group %s defined wrongly
8012 #MASKS
8013 #END_MASKS
8014 Mask defined wrongly
8015 Project phase %s not found
8018 No groups to choose from!
8020 No license for selected group available!
8024 ATTENTION: Use CAD-Version %s!
8025 Please click model in next window
8043 <-- Equipment/Zone NEW
8044 --> Equipment/Zone DELETE
8045 <-- Equipment/Zone MODIFY
8046 --> Equipment/Zone ON/OFF
8054 Error in scale
8055 Library part %s not found!
8061 No mask available!
8063 No project phase selected!
8064 Model with classification for equipment/zone %s available
8065 Error setting classification
8066 Group %s selected
8067 Equipment/zone %s selected
8068 Equipment/zone %s deleted
8069 No group selected!
8070 Number of status data out of bounds
8071 Status field for var. equipment/zone too long
8072 Equipment/zone %s switched ON
8073 Equipment/zone %s switched OFF
8074 No equipment/zone selected!
8075 Select or switch-on equipment/zone
8077 Inconsistencies in var. equipment/zone management --> Check please
8078 Project phase %s selected
8079 Equipment/zone %s has been modified
8091 Attribute %s is empty
8092 Storey data in object description and project management differ
8093 No model found##HT
8095 Project in object description not selected!
8100 J##BS
8102 A##BS
8103 S##BS
8104 R##BS
8318 Exclude or [ENTER]?
8319 Reference-point not allowed!
8320 Length calculation
8322 Click contour model 
8323 Library part
8324 Displace how? 0: distance  1:lib.number  2:m2/library part
8325 Area of coverage circle (m2)
8326 Number of library parts
8327 Element for displacement direction
8328 Distance in displacement direction
8329 Distance normal to displacement direction
8330 Offset##BS
8331 Library part not found!
8332 Contour not closed
8334 Shift by what height?
8335 Angle for offset?
8337 Shift in which direction?
8338 Height shift not possible
8343 Find gap for lintel...
8344 Click model at lintel height
8345 No pipe network found -> automatic slope anyway?
8346 Set drop where?
8347 Set offset at what point or [ENTER] for automatic?
8350 R
8351 Click loadpoint
8352 Divide evenly or loaded (R/G)?
8361 Place load point %d (from %d) with load %s
8362 Number of load points can not be divided by number of rows!
8363 Click %d point of %s
8364 Divide %d load point over how many rows?
8365 Line##BS
8366 Surface##BS
8367 Distance from left point?
8368 Distance from right point?
8369 Distance between library parts?
8370 Divide %d load points with load %s on %s 
8399 Pipe from %s to %s (Yes/No/Switched)?
8601 Network analysis...
8603 No attribute <%s> available
8604 Invalid start junction for network
8605 Invalid load point of network
8606 Invalid junctions within network
8607 Invalid height of piping part
8608 Piping part not included in analysis
8609 Number issuance
8610 Load report
8611 Attribute <%s> not available or non numeric
8612 System dimensioning...
8613 Ficticious pipe, shaped round and diameter > max. height
8614 Database entry
8616 #M
8617 WC
8618 Active model erroneous -> Clean up data, re-analyse system
8619 No reference point found
8620 Component defined incorrectly
8621 Component will not fit into circuit
8622 System generation...
8623 No network found for 3D import
8624 Circuit generation...
8625 Analysis of circuit...
8626 Analyse which circuit?
8627 No start junction found for circuit
8628 Decide on critical path and enter slope...
8629 No height difference in active circuit needs resolving
8630 Possible short in circuit! Analysis is continued...
8632 Normal vector calculation...
8634 Decide on critical path...
8635 Generate vertical scheme
8636 Start new vertical scheme?
8637 From? (Snap mode freehand)
8638 To? (Snap mode Freehand)
8639 Description
8668 Network dimensioning aborted
8669 Network analysis aborted
8670 Analyse which circuit or [ENTER] for vertical leg
8671 Please issue circuit numbers first!
8673 No network start junctions available
8674 Multiple network start junctions available
8675 No piping circuit found -> Network analysis?
8676 Inconsistency in circuit with number %d -> repeat
8677 First analyse the total network!
8678 Slope calculation
8679 No load point found
8680 Execute slope calculation first!
8681 System characteristic (1: Polygon, 2:Polygon-section, 3:Circuit)
8683 Find system and equipment...
8687 Copy storey %s to section?
8688 Side view or view?
8689 place circuit where?
8697 Error : Attribute <%s> at equipment part not OK!
8698 Error : Library part {%s} not found!
8699 Error : No connection points found in floorplan!
8700 Error : No connection point for circuit in vertical scheme!
8701 Error : Library part for vertical scheme has no connection point!
8702 Place equipment where? [ENTER] for true length
8703 Start point for vertical scheme:
8704 New start point for net section or [ENTER] for active:
8705 Draw vertical scheme to the right?
8706 Error in normal vector calculation
8810 Pipe for which pipe system?
8811 Pipe...
8812 No route found for pipe!
8814 Start pipe circuit where? Or [ENTER] for vertical system
8815 Please click 3. coordinate in window
8816 Layout...
8817 No route found for layout!
8818 Start layout where?
8819 Start layout where? or [ENTER] for vertical circuits
8821 Nominal distance for hose [mm]
8822 Circuiting for hose ready?
8823 Generating hose...
8824 No route found for hose!
8825 Start where?
8827 No circuits for network analysis!
8830 No circuits found for channel bottom!
8831 Display channel bottom at which point in the line?
8832 BS(SS) = %8.0lf mm TF slab##Base shoe/system shoe
8833 BS(SS) = %8.3lf m (from 0.00)
8834 BS(SS) = %8.3lf M.A.S
8835 BS(SS) = %8.0lf mm TF Finished floor
8836 BS(SS) = %8.0lf mm LF ceiling slab
8837 Modify height where?
8838 Pre set height is undercut by intended slope!
8839 Intended slope will not be met because of height in load point!
8840 Set height where?
8864 Files were created successfully
8901 Select project
8902 Project %s has been created
8903 Project %s has been selected
8904 Project %s must first be created
8908 Enter storey:
8910 Menu
8911 No project selected!
8912 Project %s can not be created
8913 -> Database %s can not be opened!
8914 -> Database %s can not be created in directory %s!
9000 Path for PostScript file
9001 Error when creating PostScript file
9002 Path for PDF file
9003 Error when creating the PDF file!
9004 Radiosity calculation running. Cancel with [ESC]
9005 Render process running. Cancel with [ESC]
9006 Insert reference plan
9007 Insertion of reference plan only allowed in design model view!
9008 Remote maintenance
9009 Line type scaling:
9010 Height ref. - Sea level (m)
9011 Height ref. - 0.00 (m)
9012 Height ref. - Storey (act. units)
9013 Circuit parameters
9014 Circuit type
9015 Lock orthogonally
9016 Dimension
9017 Actual incline
9018 Height 1
9019 Height 2
9020 Start circuit
9021 End circuit
9022 Circuit back
9023 Dimension
9024 Conn.type - up
9025 Conn.type - horizontal
9026 Conn.type - down
9027 Select directory
9028 Set height
9029 Move load point up/down
9030 Load point parameter
9031 Shaft geometry - circular
9032 Shaft geometry - elliptical
9033 No cone
9034 centric cone
9035 eccentric cone, entry narrow side
9036 eccentric cone, entry broad side
9037 Shaft parameters
9038 Shaft type
9039 Shaft height
9040 Upper side
9041 Cone diameter
9042 Cone height
9043 Radiosity calculation is being terminated
9044 Rendering process being terminated
9045 Visualisation material filter has been modified.
9046 Type field may not be empty!
9047 No codeword for ducting/piping!\nNo work on ducting possible!
9048 No further work on ducting allowed!
9049 ATTENTION: No codeword for ducting (max. %i actions)
9050 Set incline
9051 Three dash
9052 Three dash hatch
9053 no or incorrect object!
9054 Shaft
9055 Modify shaft
9056 Control shaft
9057 KS##do not translate
9058 Mire collector
9059 SS##do not translate
9060 Modify load point
9061 Circuit
9062 Modify circuit
9063 Copy parameters from which object?
9064 PDF file cannot be overwritten!
9065 Possible cause:
9066 No access authorisation
9067 File is in use by other user
9068 Change height
9074 Print in highest quality (slow print)
9075 Special mode (for later)
9076 Include radiosity in save
9077 Include display list in save
9078 Hatch angle relative to coordinate system
9079 Hatch angle absolute
9080 New start point
9082 Can not start model!
9083 Select colour by colour number or surface?
9084 Colour number
9085 Refresh rooms now
9086 Exterior section
9087 Exterior block
9088 Use all windows
9089 The resolution setting is too high! (max values: %d x %d pixels)
9090 The original object was modified - no further copying possible!
9091 Circuits with height indications were moved. Check for gaps in the vertical system!
9092 Circuits with height indications were copied. Check for gaps in the vertical system!
9093 Delete vertical circuits as well?
9094 Global parameters are being blocked by user <%s>!
9095 1)global parameters (parameter pre-setting)
9096 Modify is not locked
9097 Modify is locked! (HD_ADMINISTRATOR)
9098 are in local installation
9099 are managed over the network
9100 global parameters will be copied when the CAD is shut down
9101 Target path
9102 when CAD is ended the following files may be copied
9103 TIP: Minimally one toolbar with the same name was loaded.\n Do you want to show the existing toolbar?\n When NO the new toolbar will be added.
9104 The global parameters were not copied in the end!\n Please end CAD session (for copying purposes) and start new!
9105 Hatch types are different!
9106 Channel bottom
9107 Connection height
9110 Circuit process management
9111 GAEB2000 - Import
9112 GAEB2000 - Export
9123 (right mouse key => Show full material name)
9124 Show full visualisation material name
9125 Use Software OpenGL
9126 Append attributes to all visible objects
9127 Append attributes to position number
9128 Remove attributes from position numbers
9129 Configure dialog window...
9130 Read attributes of model
9131 Attributes - Settings
9133 Load 3D laser file
9135 Remove cut-out
9136 Please enter the record name
9137 This record is already available! OK=overwrite!
9138 Please select a record!
9139 Copy attributes
9140 Empty intermediate fields not allowed!
9141 Copy all attributes from mask to models on the screen?
9142 Height reference - sea level (active unit)
9143 Height reference - 0.00 (active unit)
9144 were modified
9145 Freeze user interface
9151 Created
9154 There are currently no new updates available
9162 The directory: %s could not be created
9170 Invalid work plane has been corrected
9171 Start initialization
9172 configuration server
9173 object management
9174 user interface
9175 status display
9176 ELITECAD parameters
9177 OpenGL display
9178 Graphics display
9179 VisMat database
9180 Toolbars
9181 Finishing initialization
9182 Initializing
9183 View
9184 Context management
9185 While rotating a view, solid mode will be temporarily used!
9186 ##do not translate (3/4)
9188 ##do not translate (1/2)
9190 ##do not translate (1/4)
9192 ~##do not translate (tilde)
9194 ##do not translate (my)
9196 ##do not translate (^3)
9198 ##do not translate (^2)
9200 ##do not translate (+-)
9202 ##do not translate (degree)
9204 ##do not translate (diameter small)
9206 ##do not translate (diameter big)
9208 ##do not translate (per mill)
9210 Text to active model
9211 Text into new model
9212 Temporarily switch to solid mode
9213 This process is not possible when multiple ELITECAD sessions are active! Please terminate all other ELITECAD sessions and try again.
9214 Update view and radiosity
9215 Network path for parameter default settings does not exist or is empty!
9216 Create and use path?
9217 Directories couldn't be created!
9218 Export user interface and parameter settings
9219 Import settings
9220 Import parameter settings
9221 All old user interface and parameter settings have been deleted and replaced by the imported settings.\nTo complete the import of ALL the settings ELITECAD needs to be shut down and restarted!\n\n Are you sure?
9222 All old parameter settings have been deleted and replaced by the imported settings.\nTo complete the import of all parameter settings ELITECAD needs to be shut down and restarted!\n\n Are you sure?
9223 Angle bisector
9225 16-Bit colour depth is not supported.
9226 Database connection
9227 Host:
9228 Port:
9229 Testing connection
9230 Host-name invalid!
9231 Port invalid!
9232 Error while establishing connection!
9233 Connection established successfully!
9234 This view uses the mode <automatic update>.
9235 The render image was hence not saved by ELITECAD.
9236 Model + paperspace
9237 Save background image as external reference
9238 Paste##Paste-Function
9239 Copy position number to identical objects
9240 Maintain Z
9241 Different scales in plot view. No consistency of geometry and dimension when editing!
9242 Advanced OpenGL settings
9244 Use OpenGL compatibility mode (troubleshooting OpenGL)
9246 Invert mousewheel-zoom
9247 Pan with middle mouse button
9248 Filter
9249 CAD-start
9250 4 views according to
9251 ISO
9252 ANSI
9253 Detail contour will be deleted. Delete detail view as well?
9254 Section definition line will be deleted. Delete section view as well?
9255 View still in use by plot view! Delete anyway?
9256 Test## dongle or network adapter
9257 Rotate by point entry
9258 Angle of the symmetry axis
9259 Number of copies
9260 Rotation point?
9261 Move on circle
9262 Save PostScript file
9263 Save PDF file
9264 Corner for chamfer?
9265 Modify: Chamfer corner?
9266 Corner for notch?
9267 Modify: Notch corner?
9268 Notch
9269 Chamfer by 2 distances
9270 Chamfer by distance and angle
9271 Chamfer symmetric by distance
9272 Fillet radius ( 0 : reconstruct corner when modifying)
9273 Notch radius ( 0 : reconstruct corner when modifying)
9274 Chamfer distance ( When modifying: 0 : reconstruct corner   -1 : maintain distance)
9275 2.Chamfer distance (-1 : maintain distance)
9276 Chamfer angle (0 : symmetric)
9277 Fillet/Notch/Chamfer
9278 Format 10:A00, 0:A0, 1:A1, 2:A2, 3:A3, 4:A4, 5:A5, 100:E, 101:D, 102:C, 103:B, 104:A
9279 PostScript / PDF
9280 2. point on symmetry axis?
9281 Symmetry axis by 2. point
9282 Model %d: line types 10 and 11 converted to pen 0, line type 1!
9283 ATTENTION: You are about to OVERWRITE a drawing of the unrestricted version!
9284 The drawing cannot be used commercially anymore. OVERWRITE?
9285 Text##snapmode
9286 Entry by rectangle
9287 Entry by reference point
9289 Transparent colour
9290 Rendering is locked!
9291 Error with licensing!
9292 File was created using a Trial version!
9293 File was created on another system!
9294 Licensing-server cannot be contacted!\nPlease check internet configuration (firewall)\nServer:
9295 No response from licensing-server!\nPlease try again later.
9296 Error in communication with licensing-server!\nPlease try again later.
9297 Your Trial version has expired!
9298 Your Trial version is invalid!\nPlease contact office@xeometric.com!
9299 Your Trial version is not available on the licensing-server!\nPlease check the input of the activating-code.
9300 Your Trial version could not be activated!
9301 The license-file could not be saved!\nPlease check the permissions in the installation-directory.
9302 Activate ELITECAD
9303 Invalid input - (format XXXXX-XXXXX-XXXXX-XXXXX)
9305 Should the saved work copy be loaded?
9306 Plotting is not available in Trial version!
9307 Trial version ELITECAD
9308 Commercial use is not allowed!
9309 This function is not available in Trial version!
9310 Note: Copyright-text is not printed transparently with PostScript-printing for performance-reasons.
9311 Do not show this dialog again in future
9312 SI##do not translate
9313 AB##do not translate
9314 Error when closing database connection:\nCursor opened but not closed
9315 Please select a target directory for the conversion..
9316 Converting
9317 File could not be saved!
9318 Error while converting!
9319 Welded circuit
9320 AutoCAD 2007 - 2009
9321 Select shaft type
9322 Hatch selection from table
9323 Seepage shaft
9324 Separator
9325 Offline-Plotting
9328 Spanish
9329 OLE-object could not be displayed!
9330 Textures across construction parts
9331 centre of page
9332 associative - M,Cm/mm
9333 Not possible for this view type!
9334 Reset coordinate system
9335 Intensity and size
9338 Reflexion active
9340 Query for reference point, description and catchwords
9341 Reflexion
9342 Shadow parameters
9343 Cast shadows
9344 Receive shadows
9345 shadowing only
9346 No object selected!
9347 Dimension conversion
9348 No new ELITECAD drawing could be created as OLE object!
9352 Creating an OLE object of this type can cause problems!
9353 Please try insertion of a finished file instead.
9354 An ELITECAD file could not be loaded as an OLE link.
9355 Insert as ELITECAD drawing
9362 An ELITECAD file could not be embedded as an OLE object.
9364 The OLE object could be inserted as symbol\nto reduce possible problems with the OLE server.
9366 Show as symbol
9367 OLE server depiction
9368 OLE object could not be created!
9369 No diameter/square/arc
9370 Square
9371 Abort: Not all parts of the drawing could be saved!
9373 Separator
9374 Blank
9375 Tabulator
9376 Semicolon
9378 X-Value
9379 Y-Value
9380 Z-Value
9381 Start at row
9382 File preview
9383 Drawing structure
9386 Define
9387 Activate
9390 New assembly
9391 Without assembly
9394 External rendering process (radiosity) was aborted
9395 External rendering process was aborted
9396 External rendering process (radiosity) is running (End with ESC)
9397 External rendering process is running (End with ESC)
9398 Define assembly
9399 Delete selected entry
9400 without name
9401 Which text should be excluded?
9402 Models have to be in the same assembly!
9403 Use external rendering process
9404 Please contact your administrator or hotline.
9405 Create emergency backup?
9406 Emergency backup stored as:
9407 For activation, please send emergency backup to the hotline.
9408 Hotline  D:  Tel.: 0049 6003 825 58 95,  E-Mail: hotline@xeometric.com
9409 Hotline  A:  Tel.: 0043 732 34 15 74 35, E-Mail: hotline@xeometric.com
9410 Hotline CH:  Tel.: 0041 56 418 38 38,    E-Mail: hotline.cad@messerli.ch
9411 Please check storage availability and access rights.
9412 No more licenses available at license server!
9413 No connection to license server!
9414 Please check connection to license server '%s'.
9415 No valid %s codeword found at license server!
9416 Codeword check failed at license server!
9417 Please check the connection of the dongle.
9418 Codeword check failed!
9419 ELITECAD is running in Testmode
9420 Saving and printing not available!
9421 Internet
9422 This option enables the usage of the complete RAM.\n\nImportant issues:\n-This option is intended to be used mainly for big views and high quality views.\n-When a view is updated, radiosity will be calculated again.
9423 Error while reading %s database!
9424 ELITECAD has created a problem report listing recent work steps.\nPlease forward this report to XEOMETRIC.\n
9426 We appreciate your help to improve the quality of ELITECAD.\nNaturally we handle the report with confidentiality.
9427 ELITECAD was closed because it has identified a problem!
9428 Send problem report
9429 Do not send
9430 ELITECAD problem report
9431 Dear hotline team,\n\nThis e-mail to XEOMETRIC was created automatically.\n\nPlease stat9923e your address here.
9433 Select template
9434 Select assembly
9435 INVENTOR interface
9436 PARASOLID interface
9437 PRO/E interface
9438 SOLIDWORKS interface
9439 NX interface
9441 Please select same type!
9442 Nothing selected to delete!
9443 Objects for new assembly have to be in the same assembly!
9444 Scale not possible for parametric objects!
9445 Z-shift not possible for parametric objects!
9446 The external reference is not located in the project directory! Absolute file path will be stored!
9447 Bill of material for assembly
9448 Load external reference
9449 Unload
9450 Load
9451 Show position
9452 Configure
9453 New record
9454 New record
9455 Edit record
9456 Delete record
9457 Excel-files
9460 Assembly bill of material
9461 Separated views cannot be edited!
9462 Write protected views cannot be edited!
9463 View has to be updated first!
9464 Origin view is not loaded.\nOnly 2D-data could be edited.
9466 Cancel position link 
9472 Inventor import
9473 Interfaces (optional)
9474 Error during import!
9475 File imported successfully
9476 File exported successfully
9477 Error during export!
9478 Activate assembly
9479 Add model to assembly
9480 Creator
9481 Creator department
9482 Date of creation
9483 Time of creation
9484 Date of last change
9485 Time of last change
9486 last change by
9487 department last change
9490 Room stamp
9491 House
9492 Section
9493 Floor finish
9494 Wall finish
9495 Ceiling finish
9496 Room area
9497 Room size
9498 Window area
9502 Pre-text
9505 Openings
9506 Application
9508 View type
9509 Title block
9510 Load external view
9511 Unload external view
9512 Save external view
9513 Reintegrate external view
9514 Separate view
9515 Centre lines
9516 Use layer from DXF file template
9519 AutoCAD 2010 - 2012
9520 Plan of building costs BKP-H
9521 Parametric editor component / NPK
9522 create %s##creates a new view
9523 Special functions
9524 Separate assembly
9525 New layout template
9526 Template
9528 Paper size
9529 Orientation
9530 User defined paper size
9531 Simplified geometry for tracking
9533 Metric thread
9534 Pipe thread
9535 When separating a view, the drawing has to be saved as well!
9536 At least on external view of the plot is not loaded.\nProceed?
9537 No parameter selected!
9538 Alpha channel
9539 Record already exists!
9540 Autotext
9541 Load external library part
9542 CAD version number
9543 Camera could not be activated without perspective!
9544 Recording of camera movements can only be started with active camera!
9545 Bitmaps
9546 Cancel function
9547 Change contour
9548 Please finish active contour first.
9549 The version of all 3D objects will be changed to V12 permanently!
9552 Modifications
9553 No north arrow found. Assuming Y-axis to be the north direction?
9554 Definition
9555 Layer definition
9556 Deduction/Addition
9559 Free format <X,Y> in mm
9560 Polyline
9561 Ellipse segment
9562 closed spline
9563 Undefined
9564 Delete external references
9565 Parasolid
9566 Inventor
9567 Pro/E
9568 SolidWorks
9569 NX
9571 AVI
9579 None
9580 Filling
9581 Gradient
9582 with offset
9583 2.pen
9584 1.transparency
9585 2.transparency
9586 1.offset
9587 1.repetition
9588 2.offset
9589 2.repetition
9590 Centring
9591 Line 2
9592 Fill colour
9593 Standard calls
9603 < no line >
9605 grouping
9606 Dimension
9607 No format name selected!
9608 Invalid entry! User defined paper size should be greater than 0!
9609 User defined paper size (%.2f x %.2f) matches with %s: %s\n Save standard format again?
9610 ANSI-format
9611 User defined paper size (%.2f x %.2f) matches with %s: %s\n Use standard format?
9612 Font
9613 Bold + italic
9614 Text height
9615 Text width
9616 Text angle
9618 Tabulator offset
9619 Line spacing
9620 Character spacing
9621 Change 3D-definition
9622 Attribute values
9623 Further...
9624 Activate dimension check
9625 Deactivate dimension check
9626 Configure Auto snap
9627 Stretch element
9631 Insert point
9632 Round edge
9633 Code page %i with vector font not possible!##ELITECAD will replace %i by code page
9634 Create grouping
9635 Attention: Partially selected objects were ignored.
9636 No objects for grouping selected!
9637 Grouping is in editing mode!
9638 Invalid objects for grouping selected!
9639 Error while creating grouping!
9640 Ungroup
9641 No grouping selected!
9642 Invalid grouping selected!
9643 Error while ungrouping!
9644 External reference has to be a V12 drawing!
9645 Auxiliary-geometry
9646 Arc
9647 Auxiliary-circle
9648 Load write protected copy
9649 Save changes on external view?
9651 Lock - file could not be created!
9652 Font file is loaded:
9653 Font file is saved:
9654 Font was prepared successfully:
9655 Font was not found:
9656 OpenGL version
9657 External view could not be renamed!
9658 View could not be refreshed.
9659 Drawing with model has to be reloaded.
9660 Import layout template from file
9661 Export layout template to file
9662 Remove layout template from plot view?
9663 Dissolve layout template?
9664 External view could be deleted!
9665 Layout template is still in use in a plot view. Delete as well?
9669 Source model?
9670 Revision time
9671 Revision date
9672 Scale (1:100)
9673 Scale (1/100)
9674 Plan size (A4)
9675 Plan size width mm
9676 Plan size height mm
9677 Plan size width / height
9678 Plan size width x height
9679 Construction project
9680 Created on
9681 Edited by
9682 Edited on
9683 Drawing number
9684 Revision
9685 Plan size
9687 View parameter
9688 Floor plan
9689 Section hatch
9690 Hidden line depiction
9691 Hidden edges
9692 Hidden line view
9693 Hatch for view
9694 Section view
9695 Write protected
9696 in 3D-editing mode
9697 deleted
9698 Offline plan
9699 Layout template
9700 Layout templates
9701 Perspective cannot be switched off with active camera!
9702 Startpoint
9703 Point on arc
9704 End point
9705 %d. point
9706 First apex of the ellipse?
9707 First apex?
9708 Second apex of the ellipse?
9709 Second apex?
9710 Point on ellipse?
9711 Point on spline
9712 Spline point?
9713 Tangent angle for endpoint
9714 Tangent?
9715 Tangent angle for startpoint
9716 Markerposition
9717 Point on tangent
9719 Tangential arc
9720 Arc by three points
9721 Arc by centre point
9722 Arc by tangent
9724 Polygon element
9725 Curve parameters
9727 Keyboard commands
9728 Commands window
9729 1 x 1 mm
9730 Preview window
9731 Administrate external references
9732 Reintegrate reference
9733 Dissolve copy
9734 Plot '%s' contains views which cannot be separated!\nStill separate plot?
9735 Expand
9736 Reduce
9737 Sort
9738 Ascending
9739 Descending
9740 (offline)
9741 (intern)
9742 Render internally
9743 Render offline
9744 Navigate to origin
9745 Insert view into plot
9746 Move view on plot
9747 Remove view from plot
9748 Rotate view on plot
9749 Edit view on plot
9750 Change view on plot
9751 Import layout template
9752 Export layout template
9753 Dissolve layout template
9754 Edit layout template
9755 Floor plan
9756 Plan cut-out
9757 Name from standard model view will be changed from:\n\n\"%s\" to \"%s\"\n\!
9758 Attention
9759 Main group
9760 External view
9761 loaded
9762 loaded write protected
9763 unloaded
9764 Scale
9765 No filter
9766 Object filter
9767 Classification filter
9768 Assembly filter
9769 Layer filter
9770 Origin
9771 Error while deleting
9772 Not all elements could be deleted!
9773 Editing mode
9774 New main group
9775 New group
9776 Delete group
9777 Delete this group and its content?
9778 Error with import
9779 Layout template could not be imported!
9780 New model view
9781 New view
9782 New section
9783 New floor plan
9784 New detail
9785 New plot view
9786 New plan cut-out
9787 File nor readable or unknown format!
9788 Not enough memory!
9789 File cannot be read!
9790 File cannot be opened!
9791 File type unknown!
9792 File is write protected!
9793 No appropriate compression available!
9794 Selected compression is not available for this file type!
9795 Internal error
9796 Invalid flags!
9797 Invalid parameters!
9798 Invalid size!
9799 Invalid handle!
9800 Error while saving the file!
9801 Compression error
9802 No data available!
9803 Buffer too small!
9804 Compression failed!
9805 Abort by user!
9806 Unknown error occurred!
9807 Visible light
9808 Active
9814 Smooth light
9820 Extent
9821 Rays
9822 Random distribution
9823 Apply:
9824 single
9825 on image
9826 on all
9827 Dimension and text checks
9828 Tracking
9829 do not show
9830 show
9831 show and print
9832 simplified
9833 Point colour
9834 Line colour
9835 Snap time
9836 on frame
9837 on text
9838 Auto snap mode
9840 Show memory usage
9842 Team mode
9843 Create unfold?
9854 ELITECAD does not react anymore and has to be closed!\nELITECAD will try to save a work copy,\nwhich can be loaded automatically at the next start of ELITECAD.\n\nPlease note, that successful saving of a working copy may not be guaranteed under current circumstances.\n\nRestart ELITECAD?
9855 Work copy was saved, ELITECAD will restart
9856 Work copy was saved, ELITECAD will terminate
9857 Not enough Windows resources available!
9858 ELITECAD cannot be continued!
9859 Save a work copy and restart ELITECAD?
9860 Position of the new armature
9861 Which direction?
9862 Armature
9863 Change armature
9864 Startpoint for new pipe
9865 Startpoint for new fitting
9866 Endpoint for new pipe
9867 Fitting
9868 Change fitting
9869 Position of the new flange
9870 Flange for head side
9871 Point for nut side?
9872 Screw joint parameter <%s> not found!
9873 Object is not a flange!
9874 Create screw joints...
9875 No objects found for screw joints!
9876 Change flange
9877 Position for new gasket
9878 Gasket
9879 Change gasket
9880 Define component
9881 Ball valve
9882 Stop valve
9883 Angle valve
9884 Three way valve
9885 Four way valve
9886 Y-type valve
9887 Slide valve
9888 Peet valve
9889 Shutoff damper
9890 flange shutoff damper
9891 flange shutoff damper
9892 Double flange shutoff damper
9893 Double flange shutoff damper
9894 Middle flange shutoff damper
9895 Middle flange shutoff damper
9896 Clamped flange shutoff damper
9897 Clamped flange shutoff damper
9898 Check valve
9899 Flange check valve
9900 Flange check valve
9901 Double flange check valve
9902 Double flange check valve
9903 Middle flange check valve
9904 Middle flange check valve
9905 Clamped flange check valve
9906 Clamped flange check valve
9907 Check valve
9908 Pressure regulating valve
9909 Circuit control valve
9910 Safety valve
9911 differential pressure-overflow valve
9912 Strainer
9913 Counter
9914 Welding neck flange
9915 Flange
9916 Flange
9917 Blind flange
9918 Loose type flange for Brdel
9919 Crimping
9920 Spiral gasket
9921 Flat gasket
9922 Flat gasket with holes
9923 Cap
9924 Basket arch end
9925 Dished boiler end
9926 No floating-license for drainage available!
9927 No floating-license for piping available!
9928 No codeword for piping.\nEditing of loaded piping objects not possible
9929 No further editing of piping objects allowed!
9930 ATTENTION: No codeword for piping! (max. %i calls)
9931 Connection type - double flange
9932 Connection type - on flange
9933 Connection type - middle flange (for clamping)
9934 Connection type - with external thread
9935 Connection type - with internal thread
9936 Connection type - with welding end
9937 Armature parameter
9938 Armature type
9939 Standard
9940 Series
9941 Nominal pressure
9942 Nominal width
9943 Outer diameter
9944 Entry type - 2 points
9945 Entry type - length
9946 Fitting parameter
9947 Fitting type
9948 Wall thickness
9949 Nominal width 2
9950 Outer diameter 2
9951 Wall thickness 2
9952 Flange parameter
9953 Flange type
9954 Gasket parameter
9955 Gasket type
9956 Area selection
9957 Layer selection
9958 All visible selection
9959 Element/part Selection
9960 Visible light only possible with perspective. Settings have been disabled temporarily!
9961 Render-process ends after %.1f seconds.
9962 Remove defective dimension: Select dimension text?
9963 Remove defective dimension: Select dimension arrow?
9967 Reset all...
9968 Categories
9969 Command
9970 New keyboard commands
9971 Currently used for
9972 Current keyboard commands
9973 Apply
9974 Desired command is already in use. Application deletes current setting.
9975 All personal settings of keyboard commands are reset and installation state will be restored. Current state cannot be restored after confirmation!
9976 Desired command is already assigned to this entry.
9978 Save commands
9979 Load commands
9980 List commands
9981 current category
9982 Show all
9983 Insert
9984 Keyboard command list
9985 Keyboard command 
9986 Only assigned keyboard commands 
9987 Use extended auto snap mode
9988 Snap
9989 Subdivisionpoints
9990 Grid points
9991 Endpoints
9992 Tangents
9993 Intersection points
9994 Text reference points
9995 Middle of element 
9996 Multiple angle:
9997 Additional angle
9998 Orthogonal
9999 Tangent
10000 Extension
10001 Parallel
10002 New angle
10003 No value entered
10004 Invalid value!
10005 Value is already in list
10006 Add layer
10007 Delete layer
10008 Restore layer
10009 Swap layers
10010 Swap layer types
10011 Add
10012 X-coord (rel)
10013 X-coord (abs)
10014 Y-coord (rel)
10015 Y-coord (abs)
10016 Z-coord (rel)
10017 Z-coord (abs)
10018 Bottom edge (rel)
10019 Bottom edge (abs)
10020 Upper edge (rel)
10021 Upper edge (abs)
10022 X-coord (abs)m
10023 No action selected
10024 Reload
10025 Integrate in drawing
10026 Action:
10027 recently loaded:
10028 recently modified:
10029 No action
10030 Integrate
10031 External reference is not loaded
10032 External reference is up to date
10033 External reference is not up to date
10034 Drawing not found
10035 recommended action: integrate
10036 No action possible
10037 Missing references
10038 Modified references
10039 Up to date references
10040 Recently loaded
10041 File modification date
10042 X-offset:
10043 Y-offset:
10044 Drawing is checked in...
10045 Currently drawing is checked out!\nContinue?
10046 Check in and continue
10047 A drawing is checked out! Load this drawing?
10048 End point in same plane
10049 Wireframe mode for Tracking
10050 ATTENTION: M/cm/mm dimensioning has priority when formatting dimensions!
10051 File or directory not found!
10052 Change path
10053 Group selection
10054 Maximum size reached! File is incomplete.
10055 Select contour
10056 new contour
10057 Editing not allowed in this selection mode!
10059 Use selection?
10060 Fonts and texts
10061 used fonts und texts
10062 Restart
10063 ATTENTION: Software OpenGL should only be activated when serious graphics driver problems occur,\nbecause this may result in extreme performance decrease!
10064 Load from:
10065 Add...
10066 < no colour >
10067 < no hatch >
10068 < various >
10069 Representation level:
10070 View type:
10073 Default tab stop:
10074 Position:
10075 Alignment:##Alignment
10076 Unknown object
10077 render image of view %s
10078 Replace reference
10079 Revision, editor
10080 Revision, date
10081 Set attributes on copies
10082 Regenerate missing assembly information (%s)
10083 No background colour
10084 Check in to Teamcenter
10085 Loading error of the autotext definitions!
10086 Checked by
10087 Checked on
10088 Released by
10089 Released on
10090 Revision, index
10091 Revision, note
10092 Revision, controller
10093 Revision, control date
10094 CSV Import
10095 Import contour
10096 Export contour
10097 Extended frame
10098 Terrain surface:
10099 Base and side surface
10100 Show auto text
10101 Convert auto text
10102 F13
10103 F14
10104 F15
10105 F16
10106 F17
10107 F18
10108 F19
10109 F20
10110 F21
10111 F22
10112 F23
10113 F24
10114 Num .
10115 .##OEM_PERIOD
10116 ,##OEM_COMMA
10117 Pixel format
10118 Convert PDF
10119 Convert DWG
10120 Edit file:
10121 Please enter view %1d (ENTER = end)
10122 Selecting
10123 Selection rectangle
10124 Selection element part
10125 Edit selection
10126 Selection image
10127 min. width (W):
10129 Terrain modification
10130 Greek
10131 Insert auto text
10132 Function
10133 Design model parameters
10134 Plan parameters
10135 Section parameters
10136 Visible lines
10137 Decimal places:
10138 Link ambient and diffuse VisMat properties to OpenGL colour value
10139 Angle (%.2f%.2f)
10140 2. Angle (%.2f%.2f)
10141 Text angle (%.2f%.2f)
10142 Text slant (%.2f%.2f)
10143 Copy along contour
10144 Maintain aspect ratio
10145 Change bitmap
10146 Colour depth
10147 monochrome
10148 16 mio. colours
10149 Bitmap
10150 Please insert reference point on terrain section.
10151 Terrain label
10152 3D with lines
10153 Terrain height at reference point?
10155 Existing contour
10156 Filter settings
10157 s##Seconds
10158 Rotate as normal to contour
10159 Execute the change in height also at the reference terrain?
10160 Representation level
10161 Bitmap
10162 Section view parameters
10163 Silhouettes
10164 Section lines
10165 View parameters
10166 Floor plan parameters
10167 Layer depiction
10168 single-layered
10169 multi-layered
10170 Move parallel
10171 Scale all elements
10172 Move elements parallel
10173 Move all elements parallel
10174 Expand polygon
10175 Reduce polygon
10176 Reference point? (ENTER = detect autom.)
10177 (autom. storing every %d working steps)
10179 No colour
10181 No drawing is loaded!
10182 Save the drawing first!
10183 Stretch elements
10184 Please choose deduction body for terrain
10185 The deduction is already linked to the terrain
10186 The deduction has to be exactly one part.
10187 Delete height points on contour?
10188 The perimeter contour is partially outside of the defined terrain!\nTherefore the terrain cannot be edited!
10189 The perimeter contour is not closed or invalid!\nTherefore the terrain cannot be edited!
10190 Change height points on contour?
10191 Move window
10192 Stretch window
10193 CAD400 data exchange
10194 Change polygon
10195 Parts are in different work planes
10196 No parts can be combined
10197 Combine %d parts
10198 Contour selection
10199 No unique areas have been selected
10201 Use scroll bar for graphic window
10202 Load DWG file
10203 Create DWG file
10204 Use layer convert table
10205 Create 3D by
10206 Align automatically to element
10207 Align to area/terrain
10208 Input Assistant
10210 Cutting
10211 Total changes
10212 Use actual parameters
10213 A parameter with this name does already exist.\nDo you want replace it?
10214 Regenerate incorrect assembly structure (%s)
10215 Choose grouping for editing
10216 Edit grouping
10217 Row
10218 with Pen
10219 Edge colour
10220 Error at section <%s>
10221 Section line or section symbol not found!
10222 Invalid section line!
10223 Calculated as simple cut with last section plane
10224 Cannot read font file!
10225 Cannot create dimension arrow!
10226 Cannot create dimension text!
10227 Cannot create spline no. %d (%d)! Polygon created instead.
10228 Cannot load dimensions from MI versions < 2.02!
10229 Cannot create arc!
10230 Cannot create hatch!
10231 Adjusted text with invalid line space (%2.2lf)!
10232 Could not load compressed file!
10233 No reference has been loaded
10234 External references
10235 Rotate text
10236 Rotate element
10237 Outline model (RETURN = all)
10238 View name
10239 Folder \'%s\' exists already!
10240 No frame
10241 Square-shaped frame
10242 Oval-shaped frame
10243 Round-shaped frame
10244 extended
10246 V11 user interface
10247 Do you want to change the global representation level settings?
10248 Do you want to delete the global representation level settings?
10249 No models are selected!
10250 Invalid models selected!
10251 Error while converting the models!
10252 Convert models to grouping
10253 Dissolve model
10254 Selected different storeys / structures!
10255 Paste of 3D-objects into actual view is not possible!
10256 Automatic contour
10257 Generate contour
10258 Coloured dash##Arrow tip: coloured stroke
10259 Difference between terrain and reference terrain:
10260 Check start and end point!
10261 Lines above section level
10262 Cannot expand contour!
10263 Start or end point are not on the contour!
10264 Press here to reduce the view
10265 Press here to expand the view
10266 This function is locked!
10267 The global representation level settings were modified!\nSave these changes?
10268 Modification of representation level details only allowed on selected representation levels.
10269 Remove selection from grouping
10270 No grouping while editing mode!
10271 Required title block data is missing!
10272 %s-export
10273 Retry##Retry
10274 Abort##Abort
10275 Detail contour associated with view.
10276 Detail contour not available.
10277 Detail contour ambigous.
10278 Section line associated with view.
10279 Section line not available.
10280 Section line ambigous.
10281 ArchiPHYSIK
10282 Wait for %s ... (Abort with ESC)
10283 Initialising error!
10284 Save work copy and\nclose ELITECAD
10285 Tractrix curve
10286 View names cannot contain \"%s\"!
10290 All commands
10292 Show duplicated room descriptions while drawing
10293 Expand grouping
10294 Close expansion of grouping
10295 Cancel expansion of grouping
10296 Edit of grouping is not allowed in 3D-editing mode!
10297 Notify about internet updates every
10298 month
10299 Show manager-updates
10302 Welcome to ELITECAD!
10307 Sample projects
10309 Show welcome screen at startup
10310 Gradient in %:
10311 Create as:
10312 Deactivate all elements
10317 Set visible
10319 Fix perimeter contour
10320 Section symbol
10321 Right cut line
10322 Left cut line
10323 Create parallel cut
10324 Create 3D
10325 Mark sections
10326 Preview area
10327 Allow black background
10328 Save/Load record
10329 Show alone
10330 U3D
10334 Please click contour [ENTER = end]
10335 Include cut-outs
10336 Turn over dimension text
10337 Select object
10340 Library directory
10342 Format frame
10343 A##Ansiformat A
10344 B##Ansiformat B
10345 C##Ansiformat C
10346 D##Ansiformat D
10347 E##Ansiformat E
10348 A4 vertical
10349 Switch to table view
10350 Show names
10351 Origin view is not up to date.
10353 PDF
10354 Boundary
10355 Building top/down
10356 Lines on/off
10357 Actual layer list will be lost
10358 End of broken view?
10359 Start of broken view?
10371 Cut line parameter
10372 Activate edges with solid mode
10373 Active layer cannot be removed!
10374 Animate camera
10375 Previous part of stair
10376 Next part of stair
10377 User interface
10378 Starts/interrupts time lapse with defined simulation.
10379 Stop
10380 Stops time lapse and restores previously saved settings.
10381 Whole days
10382 Simulates whole days with start time of day
10383 Simulation of sun position
10385 Display time lapse values
10386 ELITECAD - Info
10387 Lock not possible
10390 Current light settings have been saved!
10392 No light settings have been saved up to now!
10393 Light settings have been restored!
10394 Valid range:
10395 Longitude?
10396 Latitude?
10397 Time shift (12h)?
10398 Adjust background colour automatically?
10399 Start month (1-12)?
10400 Start day of month (1-31)?
10401 Start hour (0h-23h)?
10402 End hour (0h-23h)?
10403 End day of month (1-31)?
10404 End month (1-12)?
10405 Simulate whole days?
10406 Factor time lapse - 1(s) <=> x(days)?
10407 Factor time lapse - 1(s) <=> x(s)?
10408 Update interval(ms)?
10409 End time is before start time!
10410 ATTENTION: Current values have not been saved!\nSave now?
10411 Sun position values were not configured!\nRecently used values i.e. default valued are used!
10412 Days
10414 Save current light settings now?
10415 Restore saved light settings?
10416 Output intervals?
10417 New reference
10419 Microsoft .NET Framework 4.0 is not installed!
10420 rotate automatically
10421 Tree/Table
10422 Line type number
10423 Please enter a line type greater than 0!
10424 Basic colour/general
10425 Refraction / absorption
10426 General
10427 Across objects
10428 Absorption
10430 Time lapse factor
10431 1s corresponds
10432 Days
10433 Seconds
10434 Use touch mouse or other 2-button-mouse
10435 Use horizontal mouse wheel for rotations
10436 View layout
10437 Info text
10438 Video
10439 Delay (s)
10440 Minimum width (px)
10441 User interface general
10442 Show notifications as info balloon
10443 Keep standard views
10444 Single view
10445 Multiple views
10446 Tabbed views
10450 Classic
10451 Tooltips
10452 Use extended tooltips
10453 Not available
10454 Add to tool window
10455 Tools
10458 Unload group
10459 Restore standard order
10460 Really restore standard order?
10461 Really unload group?
10462 Invisible docking windows were repositioned!
10463 AutoCAD 2013 - 2017
10464 Free excavation
10465 Time lapse
10466 <F1> for help
10467 Administrate user interface...
10468 Administrate user interface
10469 Collision detection with witch object?
10470 Reference point - top left
10471 Reference point - top center
10472 Reference point - top right
10473 Reference point - center left
10474 Reference point - center center
10475 Reference point - center right
10476 Reference point - bottom left
10477 Reference point - bottom center
10478 Reference point - bottom right
10480 Rotate preview
10481 Overlined
10482 Subscript
10483 Superscript
10484 Load missing
10485 Select side
10486 Insert side or object
10487 Insert side or object and quit
10488 Float view window
10489 Dock view window
10490 Show view in a new window
10491 Show view in existing window
10492 New horizontal tab group
10493 New vertical tab group
10494 Move to next tab group
10495 Move to previous tab group
10496 Maximal opened views
10497 Colourise tabs by view type
10498 Always show new views in new windows
10499 Highlight view window
10500 Show fonts of current page only
10502 Own
10503 PDF Information
10504 Font-assignment
10505 &Yes##character after the ampersand ('&') will be used as keyboard accelerator (ALT+<character>)
10506 &No##character after the ampersand ('&') will be used as keyboard accelerator (ALT+<character>)
10507 .!?\n##sentence end punctuation marks
10508 Query
10509 Drawing locked!
10510 Configure user interface settings
10511 User interface / parameter settings
10512 Import which settings?
10513 Import all settings
10514 Create new toolbar
10515 Import toolbar
10516 Export toolbar
10517 by License server
10518 Use current layer
10519 No entries found
10520 Plane by 3 points
10521 Reference
10522 Open reference editor
10523 Close reference editor
10524 Dissolve reference
10525 Import reference
10526 Export reference
10527 Show references
10528 Paper spaces:
10529 Toolbars/Keyboard commands
10530 Fullscreen mode
10531 Show properties bar in fullscreen mode
10532 Render
10533 Freeform
10534 Lay-out
10535 Construction parts
10537 Selected invalid objects for reference!
10538 The new reference could not be created!
10539 Define reference
10540 Start height:
10541 Loaded toolbars are not overrideable!\nPlease choose another target file.
10542 Hatch to contour layer
10543 Hatch to active layer
10544 Height line?
10545 No fill colour
10546 Switch fill colour
10547 do not take
10548 stretched, tiled
10549 stretched, 1 tile
10550 Cut	Ctrl+X##dont change Tab
10551 Copy	Ctrl+C##dont change Tab
10552 Paste	Ctrl+V##dont change Tab
10553 Continous section line
10554 Broken section line
10556 Layer \'%s\' does not exist!
10557 Locked layer/storeys
10558 Reference plan/Layer
10559 Delete selection	Del##dont change Tab
10560 Update interval (%dx per second)
10561 PDF3D
10562 PDF3D file successfully created!\nDo you want to open the file?
10563 Error when saving PDF3D file!
10564 Animation start date and time
10565 Animation end date and time
10566 Time interval of the animation
10567 Current animation time
10568 Current date %s
10569 Current time %s
10570 Show vectors for points
10571 Save personal user interface settings
10572 Part-object - assignment mode
10573 Choose layout template
10574 Set format
10575 Show format frame
10576 Connection test successful!
10577 Connection test failed!
10578 Dongle driver is not installed yet, should it be installed now?
10579 No new codewords found.
10581 Dongle driver installation failed!
10582 Registry Key HD_USR not set!
10584 Codewords successfully saved!
10585 ELITECAD Setup
10586 Read codeword file
10587 Selection is not in the active storey!
10588 Plane properties
10589 This program was started with a locked user interface!\nModifications to the user interface are not possible and will not be saved!
10590 Internal references
10591 How should the toolbar be loaded?
10592 Load as independent toolbar
10593 Sun position values
10594 Configure sun position values
10595 Use the most recent values or default values
10596 Start sun position time lapse
10597 Sun position values are not configurated!
10598 Reduce the update interval (from %dx per second to %dx per second)
10599 Increase the update interval (from %dx per second to %dx per second)
10600 What should replace the reference?
10601 External reference
10602 Internal reference
10603 There is no light source with type 'sun'!\nPlease create such a light!
10604 Please click 3D-object in 3D-view! [ENTER = active 3D-object]
10605 Start arrow on which balloon?
10606 Position indicator arrow on which balloon? (2x = End)
10607 Take plane from surface
10608 Invalid dimensions!
10609 Bitmap on/off
10610 Replace lines by hatches
10611 Error when creating a model hatch
10612 Draw polylines
10613 Use pen with appropriate line width
10614 Use pen with appropriate colour
10615 Reset attributes
10617 Lib part
10618 Part filled diagonal
10619 Part filled cross
10620 Filled
10621 Child references will not be changed.
10622 Recursive
10623 Child references will also be dissolved.
10624 This reference has child references.
10625 How should those be dissolved?
10626 Display priority
10627 View before object
10628 Object before view
10629 Create filter
10630 With which content should the filter be created
10631 Every hidden
10632 Every visible
10633 Branche
10634 Show the building alone
10635 Use texture compression
10636 Autom. text enlarging
10638 Windows##user interface, plural
10639 Transfer UCS
10640 Automatic positioning
10641 Change elements
10642 One up
10643 One down
10644 To the top
10645 To the bottom
10646 3D-data in views are not allowed
10647 TTF Font
10648 Data sheet
10649 Tile horizontally
10650 Cascade
10651 Tile vertically
10652 Create 3D by using which model structure?
10653 Only layer
10654 Buildings, storeys, then layer
10656 Project team
10657 Project name
10658 Project description
10659 Project address (ZIP)
10660 Project address (city)
10661 Project address (street)
10662 Project address (street number)
10663 Change reference point
10664 User interface design
10665 PDF font
10666 Assign to
10667 PDF file scale
10668 Extended coverage area
10669 Before printing a temporary covering area is created, wich covers the whole drawing, except the area to be printed.
10670 Internal references were checked when loading.
10671 Dissolve
10672 What do you want to do with the instances of this reference?
10673 Delete reference %s?
10674 All existing instances of this reference will be dissolved and their data will be preserved.
10675 All existing instances of this reference will be deleted.
10676 Object within a reference instance was ignored.
10677 Redirections
10678 Depth of section
10679 Broken view
10681 Exported Views
10682 Open PDF
10683 Editor loading process\n%d items (%d handles / %d gripper)\n%d objects/cursor, period: %.1fs
10685 (Cancel with ESC)
10686 Drawing related col. scheme has to be renamed before saving!
10687 Deselect
10688 Show model data
10689 Anchorage
10690 Extend. DsPrint (with 3D-data)
10691 ID
10693 Configuration walk mode/input devices/shader
10694 Collision control
10695 Gravity
10696 Axis on/off
10697 Invert Axis
10698 Dead zone to %.2f %%
10699 Maximum from %.2f %%
10700 Exponent %.02f
10701 Align viewing direction horizontally
10702 Eye level (%.02f cm)
10704 The level that can be exceeded (%.02f cm)
10709 Line width scaling
10710 Pause walk
10711 Continue walk
10712 Angular velocity (%.02f /s)
10713 Aperture angle of the camera (%.02f)
10714 Layers were renamed because of conflicts with existing layer groups!
10715 Sensitivity (%.01f %%)
10717 Movement with keyboard
10718 Movement
10719 Acceleration
10720 Go through openings
10721 Context menu
10722 Restore saved camera?
10723 Export separated
10724 Export all views to a single file
10725 Export each view to individual files
10729 Locked layer
10730 Hatch - Allocation mode
10731 Add textured hatch
10732 The VisMat was attached to the hatch.
10733 The VisMat is already attached to the hatch!
10734 Invalid reference system.
10735 Animation start date and time
10736 Animation end date
10737 Assign visualisation material to the hatch contour?
10738 No hatch contour found!
10739 Jump
10740 Crawl
10741 Sneak
10742 Run
10743 Rotate slowly
10744 Move up
10745 Move down
10746 Roll left
10747 Roll right
10751 Speed (%.02f m/s)
10752 Function mapping
10753 Functions
10754 Rotation
10756 Select input device
10757 Select axis
10758 Roll
10759 vertical movement
10767 left
10768 right
10769 %s - key
10770 Cursor
10771 Create layer from optional content groups
10772 Layername - '<>' is replaced by name of optional content group.
10773 Main scale-factor (%.02f)
10774 The view creation filter includes only the current visible objects. Newly created objects will not be displayed in the view!
10775 Please complete the editing of the view creation filter first.
10777 Repetition time (s)?
10778 Play current recording
10779 Load and play camera path
10780 Save recording as camera path
10782 Key
10783 Go through bluescreen objects
10784 Assembly
10785 Object group
10786 Internal reference is up to date
10787 Internal reference is not up to date
10788 Automatically update internal references 
10790 Innovations
10791 Activation code
10792 Activate ELITECAD and get started
10793 Upon successful registration and confirmation of your E-Mail address, you will receive your personal 20-digit activation code. Please enter the code from the E-Mail here.
10794 An active internet connection is required.
10795 Activation code:
10796 Register now
10797 Notice:
10799 https://en.elitecad.eu/download-elitecad-%s?utm_source=elitecad&utm_medium=software&utm_campaign=sw-aktivierung&utm_term=registrierung#form##link for trial version (ar,me added automatically)
10800 Initial Number
10801 Move counterclockwise
10802 Move clockwise
10803 The view can not be exported to a PDF file because no PostScript to PDF Converter was found.\nPlease follow the Instructions in the Installation Guide. Press the Help button at the bottom right.
10804 Excel Workbook
10805 Excel Report
10806 Do you want to show the report?
10807 The export has failed!
10813 No data available!
10814 by Internet
10815 Expiry date
10816 Polish
10817 Mouse
10818 Keyboard
10819 Keyboard and mouse
10820 Speed and dimensions
10821 SpaceMouse
10822 Buttons
10823 Gamepad
10824 Main scale-factor
10825 Camera mode rotate/move
10826 Camera mode walk
10827 Camera mode look
10829 Administrate settings
10830 Reset all settings
10831 Only reset the settings of the current page
10832 Reset settings
10833 Navigation
10834 Override camera angle
10835 Clipping parameters
10836 New camera
10837 Delete camera
10838 Load cameras from file
10839 Save cameras in file
10840 Warning: Model size exceeds valid maximum size
10841 SketchUp
10843 Camera curve?
10844 Slope
10845 Cross section
10846 Total length
10847 Total volume
10848 sloped
10849 Inclination
10850 Point cloud
10851 Save changes?
10852 Create a snapshot
10853 Create a video
10854 Save camera
10855 Load previous camera
10856 Load next camera
10857 Decrease the aperture angle of the camera
10858 Increase the aperture angle of the camera
10859 Re-center VR headset
10860 VR on/off
10861 Oculus Rift
10862 Shader on/off
10863 Panorama environment on/off
10864 Activated camera: %s
10865 Upright body
10866 Move object
10867 Move camera
10868 Rotate relative to object
10869 Rotate relative to the viewing direction
10870 Move relative to the selection
10871 Move relative to the origin of the work plane
10872 Automatically raise
10873 Activation via online license.\nAn internet connection is required!
10874 Cubemap
10876 360 Panorama
10877 Panorama
10878 Pixel
10879 Snapshot
10880 Keep current settings
10881 Settings from camera mode walk
10882 Resolution (cube edge length)
10883 Viewing direction
10884 Line of sight
10885 Raised
10886 North
10887 View picture
10888 Start time
10889 End time
10890 Samples per second
10891 Time period [ms]
10892 Play video
10893 Follow recording
10894 Shader
10895 Shader filter
10896 Panorama environment
10897 No camera path available!
10898 Field of view
10899 Animate preview
10900 Create report
10901 Continue replay
10902 Colour assignment
10903 Reference point selection during placement
10904 Helper objects as independent objects
10905 Intelligent hatching angle calculation
10906 Show VisMat assignments
10907 Show VisMat assignments in current view
10908 Objects and part-objects also get selected.\nWhere are the VisMat assignments to be shown?
10909 Part-objects
10910 No VisMat assignments found!
10911 Interact
10912 Fast interaction
10913 Collision
10914 Collisions
10916 Object-reflections
10917 Re-create object-reflections
10918 Should the object-reflections be updated?
10919 Should the object-reflections be removed?
10920 If needed, they will be re-created automatically.
10921 Highest image quality
10922 The re-creation of the object-reflections without LOD may take some time!
10923 Otherwise the created object-reflections without LOD might lead to loss of visualisation performance!
10924 The object-reflections have to be removed!
10925 Customer data
10926 Rotate Panorama environment
10927 Automatic snapshot '%s' has been created.
10928 Auto-create when saving snapshot camera
10929 PNG
10930 ATTENTION!\nWithout LOD the object-reflections would exceed the configured maximum usable GPU memory by %d%%!\nThis might lead to loss of visualisation-performance or invalid visualisations!
10932 Changing the projection is only possible in the perspective!
10933 Oculus Rift vision tracking connected
10934 Lost Oculus Rift vision tracking
10937 Enter division point (ESC for back, ENTER for end)
10938 Showing bill of material...
10939 Generating bill of material...
10940 Teleport to viewpoint
10941 Testmode! Limit reached.
10943 Use data of plot
10944 Table cannot be divided here!
10945 Main height line:
10946 Minor height line:
10947 Reference terrain
10948 Height points
10949 Device connected
10950 Device active
10952 Inertia
10953 Endless rotation
10954 Sensitivity
10955 Camera mode
10957 Walking mode
10958 Update object-reflections
10959 Import units
10960 Terrain units
10961 Recommended codec: x264vfw. Please set filename ending on .mp4 in codec settings.
10962 Clear object-reflections
10963 Create object-reflections %d/%d - run %d/%d
10964 Interaction not possible!
10965 VisMat \'%s\' not found in VisMat manager! Maybe the VisMat was filtered due to the current filter settings.
10966 Restart recording
10967 Stop walking mode?
10968 Stop walking mode and save recording as camera path
10969 Stop walking mode without saving
10970 Recording was saved as camera path!
10971 Store current recording as camera path?
10972 Continue recording
10973 No recording available!
10974 Previous camera path
10975 Next camera path
10977 Terrain edge
10978 Terrain area
10979 Project address
10980 Address 2 (e.g. client, customer, ...)
10981 Performance analysis
10982 Start performance analysis
10983 Zoom to each single object\nProvides a global statement of the general performance
10984 Keep current camera settings\nProvides specific statement at current position and direction of view
10985 Analysing performance %d/%d
10986 Keep current performance analysis data?
10987 Double Buffering is currently activated. Performance analysis not possible!
10988 Please deactivate Double Buffering in the options first!
10989 Activate shader with solid mode
10990 Auto-create reflections
10991 Recording was restarted
10992 Restricted input device
10993 Suspend restricted input devices
10994 Camera already exists
10995 Velocity scale
10996 Ghostscript PostScript to PDF Converter could not be found.
10997 No PostScript or PDF printer found.
10998 No interaction found!
10999 Comment
11002 No Panorama environment available!
11003 Region
11004 Unknown
11007 Shader are not active! Object-reflections could not be created!
11008 Title
11009 Issue
11010 Request
11011 Answer
11012 Open
11013 In process
11014 Closed
11015 Reopen
11016 Action cannot be performed.
11017 Title:
11018 Author:
11019 Used files:
11020 Author
11021 No <Header> available!
11022 No <Topic> available!
11023 No <Comment> available!
11024 No <Viewpoints> available!
11025 No project GUID available!
11026 No <Topic GUID> available!
11027 <Topic> title is missing!
11028 Untitled
11029 No description
11030 <Topic> creation date is missing!
11031 <Topic> author is missing!
11032 Author unknown
11033 <Comment> state is missing!
11034 <Comment> date is missing!
11035 <Comment> author is missing!
11036 No comment
11037 <Comment> comment is missing!
11038 <Comment> topic GUID is missing!
11039 <Viewpoint> GUID is missing!
11040 <Viewpoint> is missing!
11041 <Snapshot> is missing!
11042 No visualisation information available!
11043 Orthogonal camera: viewpoint is missing!
11044 Orthogonal camera: direction is missing!
11045 Orthogonal camera: upvector is missing!
11046 Orthogonal camera: scale factor is missing!
11047 Invalid orthogonal camera!
11048 Perspective camera: viewpoint is missing!
11049 Perspective camera: direction is missing!
11050 Perspective camera: upvector is missing!
11051 Perspective camera: point of view is missing!
11052 Invalid perspective camera!
11053 Invalid line!
11054 Invalid start point!
11055 Invalid end point!
11056 Invalid clipping plane!
11057 Invalid position of the clipping plane!
11058 Invalid direction of the clipping plane!
11059 Invalid image!
11060 Reference document is missing!
11061 <SnippetType> is missing!
11062 Reference is missing!
11063 X coordinate is missing!
11064 Y coordinate is missing!
11065 Z coordinate is missing!
11066 Invalid bitmap type!
11067 <Bitmap> position is missing!
11068 <Bitmap> normal vector is missing!
11069 <Bitmap> upvector is missing!
11070 <Bitmap> height is missing!
11071 Creation date unknown
11072 Activate view %s
11073 Change perspective
11074 low
11075 coloured visualisation
11076 no coloured visualisation
11077 Terrain section line
11078 Swap library part
11079 Image extends size. External reference cannot be removed!
11080 VR quickstart
11081 Please put on the VR headset!
11082 Let's rumble!
11083 Please take off the VR headset!
11084 Optional: Save current recording as camera path and stop VR.
11085 STOP VR!
11086 Delete last camera paths and save current recording as camera path.
11087 Keep last camera paths and save current recording as camera path.
11088 Wave effect
11089 Normal vectors
11090 Alpha map
11091 Overlay texture
11092 Slope
11093 Grass
11094 Fire (area)
11095 Fire (volume)
11096 Wire
11097 Peaks
11099 Value in %
11101 At 100% global settings are applied
11102 Calculation range
11103 Animation range
11104 Slope angle
11105 Slope texture
11106 Slope depth
11111 Star - equilateral
11112 Overlapping - equilateral
11113 Alternating - equilateral
11114 Star
11115 Alternating
11117 Irregularity
11118 Distribution
11120 Wind
11121 Number of grasses
11125 Distortion
11127 Number of waves
11129 Circular
11133 Velocity
11136 1-1-1-2
11137 2-2-2-4
11138 Algorithm
11139 Exponent
11140 Level
11142 Glow
11143 VR on
11144 VR off
11145 Shader on
11146 Shader off
11147 Keep object state
11148 Object state: Demolition + Construction
11149 BCF manager
11150 Save to file
11151 Topic
11152 New topic...
11153 Editor:
11154 Modification date:
11155 Assigned to:
11156 Index:
11157 Reference link:
11158 Attributes:
11159 New comment...
11160 Userdefined state:
11161 Save camera viewpoint
11162 Name is not unique!
11163 Invalid name!
11164 Expand all layer groups
11165 Collapse all layer groups
11166 Leap Motion
11167 Menu style
11168 Maximal number of control buttons per page
11170 Flat
11171 Metallic
11173 No tooltips
11174 Timing
11175 Leap Motion drivers are not installed.
11176 Leap Motion SDK is not installed.
11177 Leap Motion device is not connected.
11178 Head-up display
11180 Autofocus
11181 Autofocus speed
11182 slow <-> fast
11184 Aspect ratio
11185 Dialogue
11188 Stereoscopic
11189 Adjusted
11190 Zoom on width
11194 Vitality
11196 Line intensity
11197 Surface intensity
11201 Enhanced bump mapping (Steep Parallax) on/off
11202 Overexposure (Emission) on/off
11203 Enhanced transparency calculation on/off
11204 Bump map shadow on/off
11205 Shadow volume shader on/off
11206 Soft shadow (Shadow Occlusion) on/off
11208 Gamma correction on/off
11210 HDR effects on/off
11214 Ambienter Schatten (SSAO)
11215 Shader log on/off
11216 Shader log files on/off
11217 Renovation planning shader on/off
11218 Enhanced light model (Micro facets) on/off
11219 Shadow volumes on/off
11222 Greyscale
11223 Pencil
11226 Dotted
11228 Dispersal
11229 Cartoon
11231 Blur
11236 Toon edge
11237 Bloom##HDR effect
11239 Ambient
11241 Light interval
11242 Night mode
11243 B. brightness
11244 Beginning brightness in %
11245 E. brightness
11246 End brightness in %
11247 Interval
11248 Add new interval
11249 Remove interval
11250 Intervals
11251 New interval
11252 Visualisation material mode
11253 Animated preview
11254 Pause rotation
11259 Values
11260 Panorama environment manager
11261 Determine Panorama environment type automatically
11262 Displaying work plane and model matrix
11263 Language and region
11264 decimal and list seperator
11265 Dot as comma
11266 System settings
11267 maintain
11268 Top quality
11269 High quality
11270 Average quality
11271 Low quality
11272 Activate Level Of Detail restrictions
11274 low <-> high
11275 GPU memory
11276 Shadow minimum quality
11277 Shadow detail
11278 Shadow calculation range
11279 near <-> far
11281 Grass calculation range
11282 General image quality
11292 Priority:
11293 Reflections inside reflections
11294 Lights and shadows
11295 High resolution ambient light
11296 Strong effect on high resolution displays (4K)
11297 Select focus plane
11298 Light halo on/off
11299 Overwrite file
11300 Change filename
11301 ARROWS:
11302 Expand all
11303 Collapse all
11304 Hue
11305 Saturation
11307 Specular tint
11309 Sheen
11310 Sheen tint
11311 Direction dependent
11312 Subsurface scattering
11313 Clear coat
11314 Clear coat gloss
11315 Surface presets
11316 Basic brightness
11317 Texture hatch not supported!
11318 Metal
11319 Wood
11320 Rock
11321 Lacquered
11322 Marble
11323 Plastic
11324 No shader
11325 Frequency
11326 Input device activated
11327 Shader quality
11328 Shader effects
11329 Constant
11330 Backlighting (Rim Lighting) on/off
11331 Exposure
11332 Start settings
11333 VR##virtual reality
11334 Top
11335 Bottom
11336 Front
11337 Back
11338 Hands
11339 Hands visible/invisible
11340 Shader values
11341 Estimated remaining time
11342 Hours
11343 Minutes
11344 Camera path
11345 BCF
11346 Version:
11347 Custom video settings
11348 Video settings optimized for Youtube
11349 Video settings optimized for Facebook
11350 Video settings optimized for Oculus
11352 Inactive
11353 Tabulator offset out of bound
11354 Tabulator offset (0.0 - 100.0)
11355 Based on language
11356 Germany
11357 Austria
11358 Switzerland
11359 United Kingdom
11360 Canada
11361 United States
11362 France
11364 Greece
11365 Poland
11366 Language:
11367 Region:
11369 Line type for elements (optional)
11370 Text depiction
11371 Invert background
11372 Outline
11373 Outline inverted
11374 Colour for elements, arrows and dimension lines
11375 Colour for text
11376 Colour for 3D areas and edges
11377 Colour for line and model hatches
11378 Colour for infill hatches and text backgrounds
11379 Overview
11380 Asphalt
11381 Car paint
11382 Windshield
11383 Wall paint
11384 Window pane
11385 Water
11386 Parquet
11387 Tiles
11388 Concrete
11389 Link current drawing with BCF
11390 Set up current drawing for BCF
11391 Save selection
11392 Project name 2
11393 Project address 2 (ZIP)
11394 Project address 2 (city)
11395 Project address 2 (street)
11396 Project address 2 (street number)
11397 Date:
11400 Course units
11401 Check for updates
11402 In the database the VisMat name %s for %s exists %s times!
11403 A new update is available.
11405 The connection is interrupted.
11406 Do you want to download it?
11407 ELITECAD Website##do not translate, change or delete
11408 Dissolve library part
11409 Load first camera path
11410 Select camera path
11411 User settings
11412 Welcome to GEOPAC for ELITECAD!
11413 ''##do not translate (capital )
11414 capital ''##context menu (capital )
11415 successful
11416 failed
11417 Plot type
11418 ELITECAD is currently running on an integrated graphics adapter.\nIf your system has a high performance graphics adapter available, consider activating it in your system settings.\nThis will improve/speed up refresh rates, especially with solid and shader modes.\nFor further questions regarding your hardware, please contact your system administrator.
11419 Available graphics adapter
11420 Automatically repeat creating
11421 Always use shader for preview calculation
11422 %s is configured as default shape for new visualisation materials
11423 Configure %s as default shape for new visualisation materials
11424 Pause
11425 Step forward
11426 AutoCAD 2018 - 2024
11427 Missing contour at position
11429 Repetitions
11450 Fixed point
11451 Cam
11452 Definition line
11453 Guide point
11454 Definition line angle
11455 The global parameters can not be copied back to '%s' when the CAD is shut down!
11456 No write access to global parameters!
11457 Centre line
11458 Positioning-Rule
11459 Quantity and distance
11460 Distance-list
11461 Fixed quantity
11462 Fixed distance
11463 Last part centered
11464 Last part cut-off
11465 No dimensioning
11466 Adapt box length
11468 Positioning-area
11469 Part
11470 Length X
11471 Length Y
11473 Rule
11474 Distance
11475 Distances
11476 Rest
11477 First part
11478 Last part
11479 Error: More than one start point exists!
11480 Error: More than one definition line exists!
11481 Error: No starting point available!
11482 Error: This construction can not be rotated (No matching points)!
11483 Rotation is no longer possible!
11484 Delete all kinematic definitions
11485 integrated
11486 Administrator permissions are required!
11487 Documentation
11491 General settings
11492 Increment
11493 Create copies
11494 Advanced settings
11495 Step back
11496 Play backwards
11497 Play
11498 Should the update be canceled?
11499 Infinite repetitions
11500 Available
11501 Schema not found
11502 Function not found
11503 Incompatible version
11504 Unknown version
11505 Component generator
11506 Ruleset
11507 Fixed quantity + component info
11509 Loop camera path?
11510 ATTENTION: The active drawing was not saved yet!
11511 Parts of the drawing will be deleted! - Proceed anyway?
11512 Rotation point
11513 Guide contour
11514 Driven guide point
11515 Fixed guide point
11516 Cam - Rotation point
11517 Cam - Guide point
11518 already defined
11519 Hotline
11521 Load rule
11522 Validate rule
11523 Position part
11524 Validate data header
11525 Load values
11526 Create equations
11527 Solve equations
11528 Unsolved equations
11529 Invalid value
11530 Load rule set
11531 Validate rule set
11532 Position parts
11533 Load data source
11534 Renovation planning coloured visualisation on/off
11535 PDF load object %d/%d
11536 PDF interpret objects
11537 PDF compute element %d/%d
11538 PDF draw element %d/%d
11539 Animation
11540 No animation
11541 Duration (s)
11543 Fast transparency
11544 Cannot create directory <%s>!
11546 Driven guide point
11547 Fixed guide point
11548 The top and bottom plane of the box are identical.
11549 Rotation angle per second
11550 Rotation angle in degree per second
11551 Stride per second
11552 Deselect all
11553 Load cameras
11554 Save cameras
11555 Copying %s not possible.
11558 Knot
11559 Name element
11560 Which lever goes through the fixed point? (Pick rotation point)
11561 Which circle lies on the cam?
11563 Further rotation point (ENTER for end)
11565 Invalid vector length!
11566 Final angle of definition line reached!
11567 Rotation complete
11568 Repetiton: %d
11570 R - rotation point
11571 F - fixed point
11572 S - start point
11573 D - definition line
11574 X - delete tag
11575 L - guided point
11576 C - guided contour
11577 O - delete classification
11578 M - driven point, fixed contour
11579 U - fixed point, driven contour
11580 N - cam
11581 P - rotation point on cam
11582 Q - fixed point on cam
11583 Error! Rc =
11585 Rotation increment too large!
11586 Filename?
11587 File can not be created!
11588 Define width by point or [ENTER] for numerical entry?
11590 ASCII code %d will be analysed!
11591 %d characters exported!
11592 Edit which character or [ENTER] for ASCII code?
11594 Character not existing!
11595 Warning: Currrent model coes not contain any text element!
11596 Drawing is analysed!
11598 Character out of valid range!
11599 Russian
11600 Russia
11601 Turkish
11602 Turkey
11603 Visibility
11605 Character width?
11607 Edit which character (ASCII code)?
11608 Font already exists! Overwrite?
11609 Layer %s is not defined
11610 Record %s not defined
11612 CPIXML
11613 Visibilities
11614 Image filter
11615 Image filter (anti-aliasing, texture filter)
11616 Always use the highest image filter quality  on/off
11617 Select reference line for relative angle
11619 VR headset tracking connected
11620 Lost VR headset tracking
11621 VR controller tracking connected (%s)
11622 Lost VR controller tracking (%s)
11623 Save for transfer
11624 Save drawing for transfer - inclusive views, textures, radiosity, background images and referece plan
11625 Automatically loaded toolbars
11626 Notification
11627 Rotate by an angle
11628 Symmetry axis by angle
11629 Invalid system settings
11630 SteamVR
11631 Show sensors
11632 Show cross hair
11633 Menus relative to VR controller
11634 No active VR controller found, cross hair has been temporarily activated
11635 Scale by factor
11636 Scale by point entry
11637 ELITECAD PARTS
11639 ELITECAD PARTS object parameters
11640 V-Ray visualisation material preview
11641 Create camera path
11642 Runtime
11643 Vehicle selection
11644 Terminate tractrix
11645 Tractrix documentation
11646 Project templates
11647 Non-breaking blank
11648 Other
11649 Video on main monitor
11650 Switch to thumbnail view
11651 Load last camera path
11652 Camera path successfully created
11653 Error while creating the camera path!
11654 Cameras
11655 Camera path sections
11656 Camera preview
11657 Total time
11658 Interpolation type
11659 Flight##camera path section interpolation type
11660 Section time
11661 Purge recently loaded files
11662 Not a valid CSV file
11663 Could not find any objects with attribute name %s
11664 Suspend sounds/videos
11666 Align hatch
11667 Select hatch
11668 BLOCK %s referenced from %d INSERTs
11669 %d BLOCKs referenced as copies from INSERTs
11670 Rectangle by edge and height
11671 Article number
11672 Internetupdate not possible in development edition
11673 No VR controller found!
11674 VR controller not found (%s)!
11675 Verify, if VR controller are switched on and active, restart VR if applicable!
11676 Error while connecting VR controller (%s)!
11677 Function only possible within VR with active VR controller!
11678 VR flashlight on/off
11679 %s was created
11680 Change current layer when editing
11681 Select parameter
11682 selection 2D-Def / 3D-Def
11683 Constant pace
11684 Transfer interpolated section timespans to individual camera path sections?
11685 ELITECAD Styler
11686 ELITECAD BIM Viewer
11687 Rotate work plane around the x-axis counterclockwise
11688 Rotate work plane around the y-axis counterclockwise
11689 Rotate work plane around the z-axis counterclockwise
11690 Rotate work plane around the x-axis clockwise
11691 Rotate work plane around the y-axis clockwise
11692 Rotate work plane around the z-axis clockwise
11693 Move work plane along the x-axis
11694 Move work plane along the y-axis
11695 Move work plane along the z-axis
11696 Move work plane against the x-axis
11697 Move work plane against the y-axis
11698 Move work plane against the z-axis
11699 FFL (absolute)##Finished Floor
11700 TF CS (absolute)##Top Face Ceiling Slab
11701 Path for %s and path for %s must not be identical.
11702 Path for %s must not be located within path for %s.
11703 Select directory for:\n%s
11704 V-Ray
11705 V-Ray scene
11706 Install ELITECAD PARTS?
11708 Viewer##ELITECAD Viewer (Free)
11709 Viewer Pro##ELITECAD Viewer (Pro)
11710 Styler##ELITECAD Styler
11711 BIM Viewer##ELITECAD BIM Viewer
11713 Upper left corner radius
11714 Upper right corner radius
11715 Lower left corner radius
11716 Lower right corner radius
11717 Tilt plane
11718 Draw##general
11719 Show
11720 Change dimension point
11721 Which dimension point has to be changed?
11722 New position of the dimension point
11723 Apply drawing parameters on \'New file\'
11725 IFC4
11728 Referenced storey
11729 Single coloured
11730 Create copy
11731 Generate a free definition (on) or associate definitions logically (off).
11732 The work copy is not from this ELITECAD version!
11733 Longitude
11734 Latitude
11735 Time difference
11736 North arrow
11737 Height of sun
11738 Azimuth
11739 Attenuation
11740 Shadow quality
11741 %s files
11742 Rectangular
11743 Oval
11744 Aspect ratio
11745 Syntax error: can not create equation
11746 Syntax error: can not create constant
11747 Syntax error: can not create attribute
11748 Fit last part
11749 ELITECAD Viewer Pro
11751 Select points by drawing polygon manually.
11753 Select points by box definition.
11754 Reverse line direction
11757 Corner line
11759 Connection (Pen 0)
11760 Connection (no line)
11761 Visible Objects
11762 Selected Objects
11763 Compute volume of visible Objects.
11764 Compute volume of selected Objects.
11765 Navigation
11766 Previous standard view
11767 Next standard view
11768 Camera not available
11769 Error during VR system initialisation!
11770 No valid VR runtimes have been found on the system!\nPlease check your installations.
11771 The VR headset was not found!\nPlease check your connections and VR runtime installations.
11772 Fog
11773 V-Ray options
11774 For further information see Info window and Installation guide VR.
11775 Installation guide VR
11776 CSV
11777 Anchor the light source to an object
11778 Object light source
11779 The geometry of the light source corresponds to the geometry of the anchored object.
11781 Start rendering all V-Ray scenes in a directory.
11782 Further Key combinations
11783 Aerial Perspective Atmospheric Effect
11784 Fog color
11785 Emission color
11786 Point size
11787 Select VRscans file
11788 V-Ray material
11789 Remove VRscans file
11790 CHAOSGROUP VRscans downloads
11791 abcdefghijklmnopqrstuvwxyz
11792 ABCDEFGHIJKLMNOPQRSTUVWXYZ
11793 Update failed - server not responding
11794 ELITECAD BimObject Plugin
11795 Split point cloud
11796 Strings
11797 Merge point cloud
11798 Point symbol
11799 Point info
11800 Align textures across objects over all structures
11801 Stereo buffer
11803 G# Global Parameter
11804 U# User Parameter
11805 P# Project Parameter
11806 ?# Default Parameter
11807 Replace
11808 There are multiple terrain models in the drawing
11809 Please select the desired terrain.
11810 Data
11811 Multi terrain mode
11812 The multi terrain mode controls the behaviour when starting the terrain function.\n On: Always create a new terrain.\n Off: If existing, load terrain from the drawing.
11813 Attribute value
11814 Default colour
11815 Download
11816 Download successful
11817 Install update?
11818 The height text units of the loaded terrain do no coincide with the current terrain units.\nPlease update the loaded terrain.
11819 Georeferenced coordinate system symbol on/off
11820 Activate georeferenced coordinate system
11822 DBD-BIM
11823 DBD-BIM Key
11824 Seite zur Bearbeitung
11825 Parameter Auenseite
11826 Freie Attribute entfernen
11827 Freies Attribut entfernen
11828 Objektart entfernen
11829 Freies Attribut
11830 Freies Attribut hinzufgen
11831 DBD-BIM Konfiguration anzeigen
11832 Freies Attribut definieren
11833 Auswertungs-Eigenschaften bernehmen
11834 Freie Eigenschaften bernehmen
11835 BIMcollab Plugin
11836 Snap/Select
11837 Network data invisible
11838 Following buildings/storeys are invisible:
11839 Set these building/storeys visible
11840 Always set all buildings/storeys visible
11841 Always ignore these buildings/storeys
11842 Never set buildings/storeys visible
11843 Following layers are invisible:
11844 Set these Layers invisible
11845 Always set all layers visible
11846 Always ignore these layers
11847 Never set layers visible
11848 No colours defined
11849 Colour by attribute
11850 Circumference
11852 Error with separated views.\File not found:
11853 Free attributes
11855 PostScript
11856 E57/LAS/LAZ
11857 E57 3D Imaging Format
11858 LASer
11859 LASzip
11861 PlotManager##ELITECAD PLOT Manager
11862 Create boundary contours from hatch
11863 Course of time
11864 Polygon length
11883 Yes/No-field
11884 Integer value
11885 Decimal value
11886 Stereoscopy
11887 Off-axis settings
11888 Toe-in Settings
11889 3D Stereo mode\nToe-in stereo (on), Off-axis stereo (off)
11890 red/blue 3D stereo mode
11891 Eye distance
11892 Focal length
11893 Rotation angle
11895 Gripper
11896 Selection radius
11897 Snap radius
11898 Cross hair size
11899 Manipulation\nCursor size
11900 Cross hair/Cursor
11901 Coloured
11902 Dark grey
11903 White
11904 Black
11905 Technical - light
11906 Technical - dark
11907 Technical - blue
11908 Also in dialog windows
11909 %d new message(s)
11910 We have great news for you!
11911 VRAY
11912 Select object for preparation, cancel with [ESC]
11913 DBD-BIM Plugin
11914 Warning: %s REGION objects were ignored during 2D import!
11915 Global parameter
11916 User parameter
11917 Unknown parameter
11918 Copy parameter records
11919 Administrator
11920 Source parameter
11921 Target parameter
11922 Maximium number of texts exceeded.\n1000 text were imported.
11923 Create floor plans automatically
11924 Revision cloud
11925 Reverse the bulge
11926 Average length of bulge
11927 Height of bulge
11928 Can not calculate 3-views object
11929 Attribute colours
11930 File name of library part for individual cross section contour
11931 New attribute
11932 Remove attribute
11933 New pen
11934 Remove pen
11935 Save record
11936 Modify library part
11937 Remaining objects
11938 Date and time
11939 Logical expression
11940 Percent
11941 Subtype
11942 Continue anyway?
11943 Sample objects
11944 Energy
11945 Mass
11946 Volumetric Flow Rate
11947 Thermal Transmittance
11948 Unicode support
11949 Prefer Unicode usage for file selection and file access
11950 Identifier
11951 Label
11952 Ratio
11953 Lumion
11954 Light source type
11955 Attribute assignment
11956 IfcPropertySet name
11957 IFC attribute
11958 Add assignment
11959 Delete assignment
11960 Add to current record
11961 BIMobject
11962 3D Warehouse
11963 Sketchfab
11964 Dosch Design
11965 3D Platforms
11966 BIM Tools
11967 Plugin attributes
11968 Import record
11969 Export record
11970 Records successfully imported
11971 Records successfully exported
11972 Attribute assignment successfully changed
11973 Attribute assignment added
11974 Attribute assignment could not be added
11975 two lines
11976 Show free attribute
11977 Attribute label
11978 Successfully created DBD-BIM Key
11979 User name
11980 Password
11981 Show filter
11982 Unsaved attribute assignment is discarded. Continue anyway?
11983 Choose reference point
11984 There are several reference points at this point!
11985 Which reference point?
11986 Attribute already exists, keep the value?
11987 This setting will be applied for all following attributes.
11989 Save camera path definition
11990 Load camera path definition
11991 Library part exchange point
11992 Camera path definition
11993 Import camera path definition from file
11994 Export camera path definition into file
11995 Define positioning/exchange point
11996 Position of positioning/exchange point
11997 Select positioning/exchange point type
11998 Which type?
11999 Multiple objects selected!
12000 AL##Attribute label
12001 Extend view point
12002 Shorten view point
12003 Attributes are used in views, where no colours are defined. Save anyway?
12004 Simple point
12005 Library part positioning point
12006 Position / Reference point
12007 full screen
12008 Positioning/Exchange points
12009 Select positioning/exchange point
12010 Next positioning/exchange point
12011 Library part parameter
12012 Stereo videos
12013 Overwrite all existing files?
12014 Please select object, or terminate copy parameters
12015 parallel dimension
12016 Always copy
12017 Do not adopt
12018 Free Attributes have been applied!
12019 Please select terrain for 'IfcSite'##do not translate 'IfcSite'
12020 Line length
12021 Delete attribute definition
12022 Extend stand point
12023 Shorten stand point
12024 Move forward
12025 Move backward
12026 Regular polygon
12027 3D stereo mode
12028 not activated
12029 two files (L&R)
12030 Side-by-side (L&R)
12031 Side-by-side (T&B)
12032 Video format / codec
12033 MP4 AVC (H.264)
12034 MP4 HEVC (H.265)
12035 AVI (external codec)
12036 Video quality / bit rate
12037 Join 3D objects
12038 Join 3D objects into target object
12039 Select target object
12040 Verify video settings! (%s, %s, %s)
12041 Show colours at startup
12042 New rule
12043 and
12044 less or equal
12045 greater or equal
12046 between
12047 not between
12048 starts with
12049 end with
12050 contains
12051 does not contain
12052 any
12053 Use color if condition is valid
12054 Intermediate distance
12055 Intermediate distance instead of offset
12056 Right click
12057 Slovenia
12058 Slovenian
12059 Only 1 dimension chain can be edited
12060 Activate now
12061 Request new code
12062 Contact support
12063 Not registered yet?
12064 Click on the button to the right to register now.
12065 Did not receive the E-Mail?
12066 Please check your spam folder and contact us if not there. 
12067 Problems or questions?
12068 Our Premium Support is available to assist users of the Trial and Education versions at no cost.
12069 https://en.elitecad.eu/support-request?utm_source=elitecad&utm_medium=software&utm_campaign=sw-aktivierung&utm_term=support
12070 https://en.elitecad.eu/download-elitecad-%s?utm_source=elitecad&utm_medium=software&utm_campaign=sw-aktivierung&utm_term=resend-code#help
12071 Trial version expired
12072 Your ELITECAD trial period has expired
12073 Thank you for testing ELITECAD.  We hope that you were able to thoroughly test all the functions  and experience how quickly and simply you can transform your ideas into professional, digital models.  Where to go from here?
12074 You want to really get going with ELITECAD?
12075 Get yourself the most efficient 3D planning software for your day-to-day work.
12076 Get a quote
12077 Want a personal consultation?
12078 Our experts would be happy to show you how ELITECAD can be implemented to optimally overcome your challenges.
12079 Get an appointment
12080 More time for testing?
12081 Too much to do, have yet to test all the unique features - we understand that. Just contact us.
12082 Request extension
12083 What do you think of ELITECAD?
12084 We are only satisfied, when you are. Tell us what you think.
12085 Submit Feedback
12086 https://en.elitecad.eu/inquiry?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=license-inquiry
12087 https://en.elitecad.eu/presentation-inquiry?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=presentation-inquiry
12088 https://en.elitecad.eu/download-elitecad-%s?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=extend-trial#help
12089 https://en.elitecad.eu/product-feedback?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=product-feedback
12090 Your ELITECAD Education version has expired
12091 Thank you for using ELITECAD in your education.  We hope that you were able to thoroughly use the comprehensive functions and quickly and simply transform your ideas into professional, digital models.  May we accompany you further along your path?
12092 You want to start using ELITECAD professionally?
12093 Get yourself the most efficient 3D planning software with attractive conditions for young professionals for your Start-up or for your employer.
12094 You would like to work for ELITECAD?
12095 Our team is always growing. Take a look at our open positions or send us your general application.
12096 Join the ELITECAD Team
12097 Are you still studying?
12098 Simply contact us and your educational version will be renewed.
12099 Education version expired
12100 https://en.elitecad.eu/company#career
12101 https://en.elitecad.eu/download-elitecad-%s-student?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=extend-education#help
12102 https://en.elitecad.eu/inquiry?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=license-inquiry-education
12103 https://en.elitecad.eu/product-feedback?utm_source=elitecad&utm_medium=software&utm_campaign=sw-abgelaufen&utm_term=product-feedback-education
12104 Remove entire section group?
12105 Corresponding section group invalid or missing
12106 Syncronise section parameters for section group?
12107 Also synchronise section heights for section group?
12108 Update section groups within plot views?
12109 Rotation not supported for section groups
12110 Section group has to be updated first!
12111 Twinmotion
12112 Parameters for automatic chain dimension
12113 Revision list
12114 Add a new line above the selected line
12115 Delete the selected line
12116 Move the selected line one line up
12117 Move the selected line one line down
12118 Centre vertically
12119 Centre horizontally
12120 Expand and close all
12121 activated
12122 deactivated
12123 Administrate
12124 Reset all master data
12125 Key values
12126 Textile
12127 Carpet
12128 Wooden flooring
12129 Meadow
12130 Lawn
12131 Paint
12132 Leather
12133 Iron
12134 Steel
12135 Plastic
12136 Stone
12137 Brick
12138 Paving stone
12139 Roof tiles
12140 Gravel
12141 Pebbles
12142 Sand
12143 Skymap
12144 Skybox
12145 Snow
12146 Floor Tile
12147 Ceramics
12148 Visualisation materials manager
12149 Initialise visualisation material 
12150 The VisMat properties will be resent and the current properties removed.
12151 Reset all VisMat properties
12152 Retain base colour and textures
12153 Retain base colour
12154 Detect and apply visualisation material preset automatically according to the VisMat name and path
12155 The visualisation material properties will be overwritten. Main attributes such as base colour and textures will be preserved.
12156 Proceed?
12157 No suitable preset was found!
12158 Preset selection
12159 /~Archive/##VisMat archive name
12160 Temporarily modify the filter settings for the new search?
12161 Favourites filter will be deactivated.
12162 Search filter will be reset.
12163 One or more search terms separated using '%s'\n Optional leading '%s' for exclusion(s) All terms AND linked
12164 Import textures from all folders and subfolders
12165 Enhanced textures (such as Bumpmaps...) will be merged with the related main texture of a visualisation material and not added as a separate visualisation material
12166 Import texture
12167 Favourites only
12168 Find thousands more high-quality visualisation materials online...
12169 Ignore the archive when searching the database
12170 The following VisMat favourites are no longer available and will be removed from favourites:
12171 Select owner object
12172 Inspection date
12173 Inspector
12174 Revision number
12176 Colour transparency 3D
12177 Remaining transparency 3D
12178 Height limitation
12179 Solid with shader
12180 Regular polygon with \ndimensions and reference point
12181 The dark mode has changed, ELITECAD must be restarted
12182 Internet update could not be installed
12183 Further text lines: (RETURN = End)
12184 Currently active, cannot be deleted!
12185 Vector font
12186 Circumcircle radius
12187 Incircle radius
12188 Angle between the y - axis and the connection centre point - corner point
12189 Angle between the x - axis and the connection centre point - corner point
12190 Section group
12191 Regular polygon
12192 MPEG-4
12193 Number of corners
12194 Position for the regular polygon?
12195 Regular polygon with reference point, radius/edge length and angle
12196 Regular polygon with centre point and corner
12197 Regular polygon with centre point and edge-centre point
12198 Regular polygon with two corners
12199 Regular polygon with two edge-centre points
12200 Parameters for regular polygon
12201 Parameters for regular polygon
12202 Storey for section <%s> not found!
12203 Action is only possible for limited sections!
12204 Walking mode on/off
12205 Size of the hatch definition
12206 Adopt size for distance
12207 Background transparent
12208 Synchronise section group
12209 Expand and close all layer groups
12210 New section group
12211 Switch to model
12212 Presets
12213 Favourite
12214 with layer
12215 without layer
12216 Printer (%s) will be used.
12217 The native PDF output will be used (%s).
12218 Maximum paper size DIN A3.
12219 Trailing text (for individual data)
12220 Other colour modes
12221 Use the native PDF output (%s)
12222 Display duration (s)
12223 variable
12224 Select cross-section contour
12225 reference point on inside of lower edge
12226 Simply write it
12227 Simple start writing in order to make functions available upon the push of a button and to get help
12228 Searching for VisMat %s!
12229 LAYER NAME for\nELEMENTS:
12230 Restore file links
12231 Execute as administrator?
12232 Excel-Template '{0}' does not have a Worksheet '{1}'!
12233 Excel-Template '{0}' does not exist!
12234 m
12235 Number of grid sections in the X-direction
12236 Number of grid sections in the Y-direction
12237 Automatic dimension chain (single)
12238 Automatic dimension chains (multiple)
12239 Numerical values stay the same - Regular polygon adjusts accordingly
12240 Regular polygon stays the same - Numerical values adjust accordingly
12241 Radius and edge length
12242 Parameters for regular polygon
12243 Automatically set height limitations
12244 Delete cross-section contour
12245 Tread
12246 Riser
12247 3D on/off
12248 The file is from an authorised, trustworthy source
12249 The file has not been authorised by XEOMETRIC
12250 The file is not authorised
12251 The signature of the file could not be verified or has been locally deemed as untrustworthy
12252 Select/deselect all
12253 Project name 2 second line (second client)
12254 What would you like to do?
12255 Index
12256 Comments
12257 Really delete <%s>?
12258 Edge length
12259 Change
12260 NOTE: Files for other regions can be added with %s->Modify.
12262 XML file
12263 Exported data incomplete.
12264 Export view as PDF/DWG/DXF
12265 max.##maximal
12266 Select points
12267 Database
12268 No synchronisation active!
12269 Synchronisation finished
12270 End synchronisation
12271 Synchronisation
12272 Synchronisation with message
12273 Add a new line at the end
12274 3D printing
12276 Textures from the database are not saved
12277 Only custom textures from the database are saved
12278 All textures from the database are saved
12279 Split point cloud by storey
12280 With modifications
12281 Without modifications
12282 Binary file
12283 Save transparent surfaces
12284 Point cloud succesfully splitted
12285 Error splitting the point cloud
12286 Tooltips/Help
12287 Help Center
12288 Maximum quantity of line types has been reached
12289 Information line
12290 Prioritize VisMat properties from the database
12291 Keep the VisMat properties from drawing
12292 Use the VisMat properties from database
12293 Loaded drawing is not an ELITECAD drawing
12294 Save as ELITECAD drawing
12295 Save with original file format
12296 ASCII-File
12297 Load default light sources
12298 Getting started
12299 surface
12300 Variable angle
12301 Inclination angle
12302 Slope angle
12303 %s can be entered per segment
12304 Geo attributes
12305 Slope entry of the terrain using 2 points
12306 An error occurred while interpreting the data!
12307 The process was terminated as the consistency of the data for further processing can no longer be guaranteed!
12308 To which design should the attributes be copied?
12309 Copy attributes to another design
12310 Generating current PDF - page...
12311 Adding sub view %s to current PDF - page...
12312 First page
12313 Last page
12314 OpenGL 3D stereo output swap eyes (troubleshooting)
12315 Dimensions
12316 Angle between the y - axis and the connection centre point - edge-centre point
12317 Angle between the x - axis and the connection centre point - edge-centre point
12318 Create library part
12319 BIM2AVA
12320 Current drawing was last modified %lu minutes %lu seconds ago.
12321 IFC4X1
12322 Select object for selection parameters.
12323 Mouse cursor (stereo) on/off
12324 Scale UI elements
12325 Profile may not wrap around the corner correctly.
12326 If necessary, correct the following values:
12327 Zigzag
12328 One or more search terms separated by '%s'\nOptional leading '%s' for exclusion\nAll terms OR combined
12329 Visualisation material filter
12330 Show new DB visualisation materials
12331 Besides standard
12332 New VisMat in DB
12333 Sort by date in DB (Newest)
12334 NEW according to filter setting
12335 Last modified in DB
12336 %d days ago
12337 Standard visualisation material
12338 Past 24 hours
12339 Past week
12340 Past month
12341 Past year
12342 Own text
12343 Use framebuffer objects instead of OpenGL Logic OPs for UI elements
12344 Automatically confirm in:
12345 Georeference information
12346 Import broad lines as hatch
12347 LandXML
12348 Send by E-Mail
12349 Do not save
12350 Save pending changes
12351 Discard pending changes
12352 View changes and cancel
12353 Visualisation of the changed objects in the drawing
12354 Georeferencing already exists. The drawing is inserted with reference to it
12355 The following files or links can now be sent as an attachment with your message:
12356 Pointclouds
12357 Send PDF file as email
12358 Groupings
12359 Assemblies
12360 Dodecahedron
12361 Corner
12362 Icosahedron
12363 Octahedron
12364 Platonic Solids
12365 Tetrahedron
12366 The calculation of the object-reflections (%s) still takes about: %s
12367 Continue with the calculation?\nThe calculation can also be aborted at any time with ESC.
12368 Continue calculation
12369 Cancel calculation
12370 Cancel calculation and disable automatic calculation of object-reflections
12371 Automatically continue calculation in:
12372 Scaling factor for height point distances [>= 1]
12373 Use ELITECAD Configuration to change the type of code word check.
12374 Trace point
12375 Trace object
12376 Previous modification
12377 Next modification
12378 Terrain inspector
12379 View mode - Modification Step viewer
12380 View mode - Reference terrain
12381 Import points
12382 Cutting w/ excavation
12383 Landfill w/ excavation
12384 Change w/ excavation
12385 Recreate graphic window for print preview (troubleshooting OpenGL)
12386 Trace point's\nline type
12387 Georeference
12388 Load as single object
12389 IFC4X3
12390 Start a model with suitable classification
12391 OpenXR
12392 Touch
12393 Vibration
12394 Slope over drainage point
12395 Slope over drainage contour
12396 Contour cannot have arcs
12397 Contour is situated partly outside of excavation
12398 Loaded terrain offset does not match the georeferenced coordinate system. /nPlease check the georeference.
12399 Split which chain dimension
12400 Split chain dimension
12401 Select %d. dimension to join
12402 Select %d. hatch to join
12403 From which dimension should the parameters be copied?
12404 Join chain dimension
12405 Angle for VisMat/hatch orientation
12406 Referenced storeys single-coloured depiction on/off
12407 Load storey
12408 Section lines for view %s differ across the storeys
12409 Select a section line to align
12410 This section line will be copied into other storeys
12411 Leave section lines mismatched
12412 The alignments can be applied later
12413 Record name
12414 Record name with path
12415 Further occurrences 
12416 Linked materials
12417 Unlinked materials
12418 GE##Terrain
12419 Number of frames per object side?
12420 Select performance selection type
12421 Median-factor/nObject with a frame rate >= Median-time * factor will be selected
12422 Maximum-factor/nObject with a frame rate >= Maximum-time * factor will be selected
12423 Median-factor
12424 Maximum-factor
12425 Drawing will be saved as %s!
12426 Planradar Plugin
12427 Luna
12428 Left click
12429 Play camera path
12430 Add camera as clip (start sequence)
12431 Add camera as clip (with final sequence)
12432 Clip length only available when total time is deactivated
12433 Deactivate total time?
12434 Attach all cameras as clips?
12435 Delete all camera path clips?
12436 Modify camera path from: %s
12437 Camera path clip not available!
12438 Camera path %s successfully created
12439 Camera path from %s successfully modified
12440 Clip length and interpolation type from currently selected clip
12441 Clip length %ss
12442 Followed by a %ss pause
12443 Add camera as a clip
12444 Hard cut
12445 Attach all cameras as clips
12446 Create 2D shape from text contours
12447 Create 3D box from text contours
12448 Create free line type from text contours
12449 Create QR Code from text
12450 Show QR code link and info
12451 Create video: %s
12452 Splitting error
12455 From which hatch should the parameters be copied?
12456 Joining error
12457 At least 2 hatches must be selected
12458 The reference point has been selected./nThe information for the georeferencing will be lost when deleting.
12459 Delete reference point
12460 QR code could not be created from the text!
12461 Line type was successfully created
12462 Object could not be created from the text contours!
12463 Modify camera path
12464 Move the section up
12465 Move the section down
12466 Delete section
12467 Delete all sections
12468 Rotate line pattern like text
12469 Expand selection
12470 Reduce selection
12471 Do not capture point cloud
12472 Capture point cloud
12475 Select floor plan contour
12476 Reference point on outer stair entrance
12477 Value was automatically corrected.
12478 File %s is read-only or a folder!
12479 The entered path %s is invalid
12480 File %s is already open!
12481 Chats
12482 Move routing line
12483 Stretch routing line
12484 Move load point
12485 Move shaft
12486 Select points from active clipping
12487 One plane in Z direction
12488 One plane in X direction
12489 One plane in Y direction
12490 Two planes in Z direction
12491 Two planes in X direction
12492 Two planes in Y direction
12493 Six planes
12494 Split hatch
12495 Join hatch
12496 Delete floor plan contour
12497 Edit floor plan contour
12498 Placed visualisation material name remains unchanged and has priority!
12499 Placed visualisation material name has priority!
12500 Select material
12501 Remove visualisation material assignment
12502 Edit global record
12503 Select record
12504 Select layer
12505 Select hatch
12506 Select text parameters
12507 Current folder
12508 No archive visualisation materials
12509 No standard visualisation materials
12510 Records
12511 The visualisation material name can also be deleted from the entry field!
12512 No standard records
12513 Excavation, Landfill, free Excavation
12514 Streets, Paths
12515 Terrain modelling
12516 Trench
12517 Backfill
12518 Terrain modelling (edges, points, surfaces)
12519 Remove error markings
12520 Create reference
12521 Offset to top edge
12522 Replace: Replaces the existing terrain with a new terrain
12523 Load into: Activates multi-terrain mode and creates an additional standalone terrain
12524 Add: Adds the new point set to the existing terrain
12525 Building structure through clipping
12526 Same parameters for all view types
12527 Change offline status of floor plan
12528 Upload to
12529 Planradar
12530 Access Token
12531 Relative to current coordinate system
12532 Visualisation material
12533 Select VisMat
12534 New VisMat
12535 Visualisation material name
12536 Visualisation materials
12537 VisMat
12538 Use clipping to choose heights
12539 Classification
12540 Owner
12541 Last update
12542 Valid until
12543 Reference year
12544 UUID
12545 Data set version
12546 Gross density
12547 Global Warming Potential - total (GWP-total)
12548 Global Warming Potential - biogenic (GWP-biogenic)
12549 Global Warming Potential - fossil fuels (GWP-fossil)
12550 Global Warming Potential - land use and land use change (GWP-luluc)
12551 Depletion potential of the stratospheric ozone layer (ODP)
12552 Photochemical Ozone Creation Potential
12553 Acidification potential, Accumulated Exceedance (AP)
12554 Eutrophication potential - terrestrial (EP-terrestrial)
12555 Eutrophication potential - freshwater (EP-freshwater)
12556 Eutrophication potential - marine (EP-marine)
12557 Water (user) deprivation potential (WDP)
12558 Abiotic depletion potential - non-fossil resources (ADPE)
12559 Abiotic depletion potential - fossil resources (ADPF)
12560 Use of renewable primary energy (PERE)
12561 Use of renewable primary energy resources used as raw materials (PERM)
12562 Total use of renewable primary energy resources (PERT)
12563 Use of non renewable primary energy (PENRE)
12564 Use of non renewable primary energy resources used as raw materials (PENRM)
12565 Total use of non renewable primary energy resource (PENRT)
12566 Use of secondary material (SM)
12567 Use of renewable secondary fuels (RSF)
12568 Use of non renewable secondary fuels (NRSF)
12569 Use of net fresh water (FW)
12570 Hazardous waste disposed (HWD)
12571 Non hazardous waste dispose (NHWD)
12572 Radioactive waste disposed (RWD)
12573 Components for re-use (CRU)
12574 Materials for recycling (MFR)
12575 Materials for energy recovery (MER)
12576 Exported electrical energy (EEE)
12577 Exported thermal energy (EET)
12578 A1 - Raw material supply
12579 A2 - Transport
12580 A3 - Manufacturing
12581 A1-A3 - Production
12582 A4 - Transport
12583 A5 - Installation
12584 B1 - Use
12585 B2 - Maintenance
12586 B3 - Repair 
12587 B4 - Replacement
12588 B5 - Refurbishment
12589 B6 - Operational energy use
12590 B7 - Operational water use
12591 C1 - Deconstruction
12592 C2 - Transport
12593 C3 - Waste processing
12594 C4 - Disposal
12595 D - Recycling potential
12596 Entire Lifecycle
12597 kg
12598 MJ
12599 m3
12600 kg CO2 eq.
12601 kg CFC11-eq.
12602 kg NMVOC-eq.
12603 Mol H+ eq.
12604 Mol N eq.
12605 kg P eq.
12606 kg N eq.
12607 m3 world-eq.
12608 kg Sb-eq.
12609 No points found!
12610 No columns selected!
12611 No terrain found!
12612 Change coordinate system
12613 EPD/DPP indicator
12614 Life cycle phase
12615 EPD / DPP values
12616 Associated parameters
12617 Reference system
12618 Position and planar rotation
12619 Consider georeferencing
12620 IFC reference system
12621 ELITECAD height
12622 /~Archive
12623 Associated with
12624 KOBAUDAT
12625 GWP-total
12626 Add numerical color scale
12627 Activate coordinate system
12628 Buffer/import filter name
12629 Last selection buffer (internal)
12630 Manipulation buffer (internal)
12631 Parallels
12632 Graduations
12633 Lower threshold
12634 Pen for mean value
12635 Upper threshold
12636 Delete old pens
12637 Buffer/import filter selection
12638 New buffer/import filter
12639 DPI upper limit
12640 Open file location
12641 Distance - Auto follow
12642 Body follows automatically
12643 CSV export
12644 Export units
12645 Invalid DPI upper limit is corrected.
12646 Compact parameter selection
12647 Display archive
12648 Display as new
12649 Fire resistance class
12650 S# Global XEOMETRIC standard parameter
12651 Point clouds only
12652 ODBC database connection
12653 Favorites
12654 ~Archive
12655 Hide archive
12656 Hide empty folders
12657 Copy GUID to clipboard
12658 Copy link to clipboard
12659 Archive
12660 No visualisation material selected
12661 Open link
12662 Moving is not possible in sorted view.
12663 PENRT##abbreviation for  Primary energy non-renewable - total
12664 XYZ
12665 Join scans
12666 Cancel import?
12667 Chain dimension cannot be split here
12668 Please exit ELITECAD first
12669 Objects by material
12670 Ukrainian
12671 Ukraine
12672 Unexpected MAJOR version
12673 ProjectedCRSGeoKey required for Projected CRS
12674 GeodeticCRSGeoKey required for Geographic and Geocentric CRS
12675 Unexpected value for
12676 Raster type not found - georeferencing may not be accurate
12677 Citation required when Model CRS is user-defined
12678 required for user-defined CRS
12679 No Model Type
12680 Insuficient information to determine scale
12681 Raster Type
12682 LOD restrictions lead to increased performance with reduced image quality
12683 Final refreshes without Level Of Detail
12684 Best image quality despite active LOD restrictions.\nIn working mode, a final refresh is performed without most LOD restrictions after camera changes and manipulations.
12685 Back
12686 Forward
12687 mtextur
12688 ambientCG
12689 Poly Haven
12690 Hierarchy within VisMat-Manager
12691 For optimal results, please download .zip files in 2K format.
12692 Select hierarchy for each file
12693 Into absolute mtextur material type hierarchy
12694 Into current folder incl. mtextur material type hierarchy
12695 Into current folder without hierarchy
12696 Delete temporary files after closing the dialog
12697 Delete temporary files after download
12698 mtextur VisMat Import
12699 Where to import?
12700 Not a .zip file
12701 Cache point clouds on the graphics card
12702 Z-Value by value input
12703 Z-Value by point input
12704 Title block could not be converted!
12705 MP4 AV1 (AOMedia)
12706 Point cloud density
12707 Select mode for operation.
