$ (c) XEOMETRIC
10 ME Parameters
11 Flipping
12 Tracking
13 OK
14 Cancel
15 RECESS
19 Exit
20 Record
22 Search
25 Content
29 Classification:
31 Dimensions:
32 Shape
33 circular shaped
34 rectangular
35 hexagonal
36 Slotted hole
38 Sinking
41 BASE PLATE
42 Material:
43 fourfold drill
44 double drill
45 centric dril
46 without drill
47 free contour
55 Drill symbol
56 M8
57 M10
58 M12
59 M14
60 M16
61 M18
62 M20
63 M22
64 M24
65 M27
66 M30
67 M33
68 M36
69 Free entry
81 =
82 T
83 X
84 M
85 C
86 R
96 ,
98 Section identifier
99 Detail identifier
100 View identifier
101 N1
102 N2
103 N3
104 N4
105 N5
106 N6
107 N7
108 N8
109 N9
110 N10
111 N11
112 N12
113 N9 / N7
127 waxed
128 milled
129 ground
130 pollished
131 smoothed plain
132 pulled
133 honed
134 pressed
135 ball blasted
136 browned
137 sandblasted
138 oiled
139 phosphorescent
140 enamelled
141 anodized
142 anodized
143 copper-plated
144 chrome plated
145 chromed
146 nickel-plated
147 tempered chrome
148 silverplated
150 goldplated
151 fire galvanized
152 lapped
153 Free text entry
155 Welding symbols
164 transposed
168 Contra weld
170 additional treatment
176 Keel-weld
177 Keel-splitweld
178 Keelseam welded from behind
179 Double keel-weld
180 V-weld
182 Y-weld
183 Half Y-weld
184 Double Y-weld
185 U-weld
186 Half U-weld
187 Double U-weld
188 HV-weld
189 HV-angle weld
190 Folded-weld
191 I-weld
192 Angle-weld (for plate)
193 Angle-weld with fissure
194 Flat weld
195 Multipleplane weld
196 Keel-plate weld
197 K-keel weld
198 K-blunt weld
199 X-weld
200 Hole weld
201 Sunken plane weld
202 Surface weld
203 Double HY-weld
204 steepflank weld
205 Slanted weld
206 Pleat-weld
207 Double HU-weld
208 V-U-weld
209 Line weld
210 Point weld
224 NVS400
225 Screwing
226 Standard parts selection for screwing
228 Select all catalogues
229 Generate view (without BOM info)
230 Modify component
231 Modify screwing
232 Topologic copy
233 Save component
234 Load component
235 Visibility: component on top
236 Further visibility functions
237 Delete component
239 NVS400  Stop and release licenses
240 U20
241 FAST-Exportfile for test purposes
248 Examples
275 Flange
277 Base block
299 Positioning
309 ME-Object
319 Screw
323 Engine
324 Explosion
333 Base plate
334 Shaft
335 Profile
336 Standard parts
337 Drill symbols
338 Surface symbols
339 Welding symbols
342 Generate
343 Edit
350 Symbols
352 Constr. elements
355 Centre line over 2 points
356 Centre lines for circle
358 Assign and draw a position number.
359 Polygon
360 SINKING
366 Sinking shape H,J,K
370 Attributes
373 Recess
374 Sink
378 3D
379 Drilled Disc
380 Number of holes
381 Centre lines
382 middle
383 fine
384 Execution
385 Through-hole
386 Thread-settings
387 no thread
388 Internal thread
389 PROFILE
390 I-Profile
391 L-Profile
392 U-Profile
393 Hollow profile
404 Name:
405 GEOMETRIC TOLERANCES
406 Tolerance-type
407 Straightness
408 Evenness
409 Roundness
410 Cylinder
411 Line shape
412 Plane shape
413 Total run
414 Parallelity
415 Rectangularity
416 Inclination
417 Position
418 Coaxiality
419 Symmetry
420 Smoothing run
421 Tolerance value
422 Tolerance reference
423 A
424 B
425 D
426 AB
427 AC
428 COUPLING
429 Size
431 Centre line
440 V-BELT PULLEY
441 Number of grooves
442 SHAFT
443 Round groove
444 Connical element
445 %d. segment
446 Previous segment
447 Next segment
448 Apply contour
449 Apply changes
451 Remove segment
453 Shaft start
454 Normal
455 Round
456 Chamfer
457 Relief groove - Shape E
458 Relief groove - Shape F
459 Shaft end
460 Round
461 Rounded groove - 1
462 Rounded groove - 2
463 Rounded groove - 3
464 r
465 rad
466 a
467 b
468 d
469 c
470 Properties:
471 Gear wheel
472 Module
473 Number of teeth
474 Pressure angle
475 Gear wheel width
476 Resolution
477 Simplified
478 Uncut
479 Cut
480 Boken up
483 Drilling diameter
485 Diameter
486 according to standard
487 Free
488 Moments
489 Axis
490 Construction elements
491 Ellipse
492 Spiral
493 Radius of outer circle
494 Radius of inner circle
495 Constr. over axis length and reference point
496 Main axis+point on ellipse
497 Rotation direction of spiral
498 Spiral goes clockwise
499 Spiral goes counterclockwise
500 PEDESTAL BEARING
501 Front view
502 Top view
503 Side view
504 Imaging angle
505 normal drill
506 Through-hole
507 Countersunk drilling - clipped
508 Countersunk drilling - pointed
509 Countersunk drilling - relief groove
510 Enter reference point
511 Entry by mouse
512 Enter fixed lenght
513 PIPE INTERSECTION
514 Diameter large cylinder
515 Diameter small cylinder
516 Axis offset
517 Materials parameters
518 Material
519 Specific weight
522 Delete material
524 Protrusion
525 FEATHER KEY
526 Drill
527 View
528 Section
530 Thread length
531 Pipe length
533 V-belt pulley
535 Pipe intersection
536 Feather key
537 Kinematics
538 Assign
541 Coupling
542 Pedestal bearing
544 Tear Line
545 Geometric tolerances
546 Finish
548 Visibility in plot
549 The active model was generated under conditions:
550 Model is normal to viewing direction(from front)
551 Model is normal to viewing direction(from front and back)
552 Z-axis of model is normally to viewing direction
553 always, except Z-axis is normal to viewing direction
554 Model is allways visible
555 No selection
556 Views that will never be included (option)
557 Views that will always be included (option)
559 Visibility...
560 Add
561 show 3D object uncut in section view
562 Nut
572 Parameters
574 Positioning parameters
575 Arrow - parameters
576 Text - parameters
578 Step width
579 Insert numbers
582 Screws
583 Screwing settings
584 Thread diameter
585 Screw length
586 Clamp length
587 Clamplength over 2 points
588 Washers
589 Table output in:
590 Infowindow
591 CAD (model)
593 Bill of material output in:
594 Excel-File
595 Positioning over:
596 Full profile
597 Free profile
598 Predecessor
599 Details
600 upper sinking
601 lower sinking
602 on site assembly
603 on site drilling and assembly
604 Surface symbols
606 Material separation wanted
607 Material separation free
608 Material separation not allowed
609 plain
610 low in value
611 middle valued
612 eminent
613 most eminent
614 Line parameters for ME-Objects
615 Thread line
616 Breakline
617 Hidden line
618 Techn. notes
619 Area - start
620 Area - stop
622 Designation
623 Material number
624 both
625 Fittings proposal
626 Nominal dimension:
627 Tolerance field:
628 Upper dimension
629 Lower dimension
630 Tolerance:
631 Largest dim:
632 Smallest dimension
635 Bill of material
636 Section line
637 Round washer
638 Special washers
639 Quadrangular washers
641 Construction size
643 Pole
644 Rear view
645 Append attributes to all visible objects
646 Append attributes to position number
647 Remove attributes from position number
648 Extended
649 Configure dialog window...
650 Attributes - Settings
653 Bearing
654 Roller bearing
655 Groove ball bearing
656 Special ball bearing
657 Special bearing
658 Alternatives
659 Depiction
660 Installation state
661 Convert CAD400 position numbers
662 Pins
663 Threaded pins
664 Blank pin
665 Grooved pin / Slotted spring pin
666 Pinbolts
667 Locking ring
668 Screws
669 Socket screws
670 Tapping screws
671 Special types of screws
672 Standard part parameters
674 Pipe screw fitting
675 Flanges
677 Pipes
679 Seeking for:
680 Fitting
681 Straight form-parts
682 Bent form-parts
683 Branching form-parts
684 Accessories
693 Technical notes
694 Tolerance table
695 Fittings table
696 Standard part over number
698 Moments - axis
699 Standard title
700 Standard changes
731 Example-2D
732 Example-3D
733 Example03
734 Example04
735 Example05
736 Example06
738 Moments - start
739 Moments - end
744 New numbers
745 Distance
746 Auto suggestion
747 Generate preview
748 Read attributes of model
749 Standard part parameters
750 Rotate hatching
751 Scale hatch distance
752 Hatch parameters
756 Mirroring
757 To dimension
758 Standard drill
759 Standard shaft
760 Fit system
761 Loose fit
762 Tight fit
763 Transition fit
764 Fit type
765 Characteristic
766 Gen. application
767 Example
768 Fit
769 Nominal dimension
770 Largest clearance
771 Smallest clearance
772 Fit tolerance
773 Characteristic/Application/Example
774 Tolerance value
775 Fit
776 Tol.-Arrow
777 Arrow paramaters for tolerance arrow
778 Symbol
779 Pen for symbol
780 Tol.-value
781 Text parameters for tolerance value
782 Tol.-ref
783 Text parameters for reference of tolerance
784 Continous
785 Text parameters for all texts
787 Tolerance calculation
788 Copy-parameter
789 Tolerance field
790 Dimensions
792 all
793 show all fits
794 Tolerance calculation standard drill
795 Tolerance calculation standard shaft
796 General applications
799 Fits management
801 Bearing add-ons
802 Value for M?
803 Where to?
804 Enter weld seam width [mm]:
805 Attach welding description where?
806 Enter first weld-seam width [in mm]:
807 Enter second weld-seam width [in mm]:
808 Enter arrow point!
809 Enter endpoint of arrowline!
810 Enter endpoint of reference line!
811 Attach welding description where (blue reference line)?
812 Enter welding text:
813 Place where to?
814 Assignation text?
815 Image refresh after each calculation ON!
816 Image refresh after each calculation OFF!
817 BILL OF MATERIAL
818 Generate bill of material ...
819 Bill of material will be shown ...
820 Please select circle or r<radius>!
821 Radius?
822 Designated element is not a circle!
825 Height of centre line?
826 Place perpendicular centre line where?
827 Number of corners?
828 Interior [0] ,Exterior [1]?
829 Angle?
830 ** Attributes and symbols will be
831 ** not copied into this model!
832 Assign position number to which object?
833 Component already has pos. no.: %s! Overwrite?
834 New position number?
835 Position number?
836 Location for position number?
837 Arrow end?
838 Warning
839 y/n
840 y
841 n
847 Weight
849 Comment
850 Standard
853 Nominal width, wall thickness (0=none) and colour?
854 Factor for curvature radius (e.g. 2*diameter ) or 0=direct
855 Curvature radius to be entered at once with each bow.
856 Number of segments or 0=drect input
857 Number of segments to be entered at once with each arc.
858 Start/End point of route?
859 Route corner point?
860 Next corner point (<ESC> = final pipe)?
861 Curvature radius?
862 Number of segments?
863 Pipe start point
864 Pipe end point
865 D1=top,D2=bottom and enter height!
866 Offset in X and Y!
867 Position on working plane!
868 Enter length, heigth and diameter!
869 Protrusion top and bottom
870 Start movement (+/-)
873 Increment (degree)
875 Enter length, width and height of the plate!
876 Enter position (centred)!
877 Enter corner radius (0=none)!
878 Enter corner drilling diameter (0=none)!
879 ATTENTION! Diameter for corner drilling too large!
881 Generate base plate
882 Create profile
887 Edit ME-Object
899 Create construction elements
900 Create shaft
901 Create gear wheel
902 Create V-belt pulley
903 Create external thread
904 Create pedestal bearing
905 Create coupling
910 Create screwing
911 Create screw
912 Create nut
913 Create washer
916 No correct base plate!
917 Define which model as base plate?
919 Reference point?
920 Which direction?
921 Modify which base plate?
922 Delete which base plate?
923 Copy which ME-Object?
924 Move which ME-Object?
925 Move which point?
926 Copy how often?
927 Rotate which ME-Object?
928 Centre of rotation?
929 Rotation angle?
930 Which ME-Object offline/online?
931 Delete which ME-Object?
933 Modify which ME-Object?
934 No active model!
935 Copy which model?
936 No correct drill!
937 Modify which drill?
938 Define which model as drill?
939 Delete which drill?
940 Start point?
941 End point?
944 Which model as profile cross section?
945 With reference point?
950 Place where?
951 Points are identical!
953 Enter start point
954 Enter end point
955 Not a correct V-belt pulley!
959 Not a correct gearwheel!
961 Modify which gearwheel?
962 Delete which gearwheel?
963 No correct tear-line!
964 Position where to?
965 Starting point?
966 No subsequent modifications possible!
967 Modify which element?
968 Define which model as element?
969 Not a correct construction element!
970 Which circle?
971 No correct entry
972 Starting point for main axis?
973 End point for main axis?
974 Point on ellipse?
975 No correct geometric tolerance!
976 Point 1
977 Point 2
978 Change not possible
979 Modify which geometric tolerance?
980 Delete which geometric tolerance?
981 No correct feather key!
982 Start point (left)?
983 End point (right)?
984 Modify which external thread?
985 Delete which external thread?
986 Modify which coupling?
987 Delete which coupling?
988 Incorrect pipe blend!
990 Modify which pipe blend?
991 Delete which pipe blend?
992 Negative values were entered!
993 The sum of the transition lengths is larger than the shaft width!
994 The sum of the transition widths is larger than the shaft width!
995 Invalid parameter values!
996 You have reached the maximal amount of shaft segments!
997 Shaft transition is not possible with these settings!
998 End point (to fix axis inclination)?
999 New segment
1001 Shaft segement does not yet exist!
1003 Not a correct pedestal bearing!
1004 Modify which pedestal bearing?
1005 Delete which pedestal bearing?
1006 Not a correct external thread!
1007 Delete which object?
1008 No correct coupling!
1009 No correct shaft!
1010 Define which model as shaft?
1011 Feather key value for this diameter not available!
1012 ME-Object was created in other version. No modifications possible!
1013 No correct shaft contour!
1014 Position which component?
1015 Position of component number?
1021 Insert will start at which position number?
1022 To which position number should be moved?
1023 New number is invalid!
1024 Delete which position number?
1025 Record created with wrong version!
1026 Record not available!
1032 Head side?
1033 Nut side?
1036 NOTE: No code word for this standard part
1039 %d point(s) deleted
1040 Not a correct DIN element!
1043 Gear wheel must have at least 4 teeth!
1044 Module must have positive value!
1045 Intervention angle must be positive!
1046 Minimum resolution = 5!
1047 Maximum resolution = 30!
1048 Gear wheel width must be positive!
1049 Gear wheel height must be positive!
1050 Drilling diameter must be positive!
1051 Diameter too large!
1052 Drilling diameter too large!
1053 Roundings intersect, intervention angle too large!
1054 Teeth are overlapping!
1055 Error!
1056 Enter point of the section line (Enter is End)
1057 Wrong settings
1058 Delete which section line?
1059 No symbols selected!
1060 Not a correct surface symbol!
1061 Modify which surface symbol?
1062 Delete which surface symbol?
1066 No dimensions with tolerance indication found!
1067 TOLERANCE TABLE
1068 Fit size
1069 Largest size
1070 Smallest size
1071 Max.
1072 Min.
1073 Area          A
1074 Circumference P
1075 Center of gravity
1076                         Cpt.y
1077 Distortion angle Phi
1078 Moments of inertia
1079 related to axis n-n
1080 related to axis c-c
1081 related to axis 1-1
1082 related to axis 2-2
1083 Centrifugal moment
1084 Resistance moments
1085 related to axis n-n     Wnmin
1086                         Wnmax
1087 related to axis c-c     Wcmin
1088                         Wcmax
1089 related to axis 1-1     W1min
1090                         W1max
1091 related to axis 2-2     W2min
1092                         W2max
1093 Inertia radius
1094 related to axis 1-1     i1
1095 related to axis 2-2     i2
1096 related to axis n-n     in
1097 related to axis c-c     ic
1098 Static Moment
1099 Static Moment           Hy
1100 Moment of inertia
1101 Moment of inertia       Iy
1102 Moment of inertia       Ixy
1103 Output to Excel-file has not yet been implemented!
1104 No value for data available
1105 As dummy
1106 No model for position number indicated!
1107 Enter a name under which the record must be saved!
1108 Record name not allowed!
1109 This record is already available! OK=overwrite!
1110 Select a record!
1113 Position for arrow end?
1114 Position number already used in drawing!
1115 Not available in 3D view
1116 Which standard?
1117 No standard found!
1118 %s invalid\nValid values: %s
1119 Postioning a postion is not possible!
1123 Store tolerance-/fit table under
1124 Store moments/area under
1125 AREA CALCULATION
1126 CALCULATION OF MOMENTS
1127 FIT TABLE
1128 Diameter not contained in standard
1129 No model for drill!
1130 Invalid ID of the mask field!
1132 No standard parts available!
1133 The standard part list cannot be found!
1134 <No selection>
1135 Record not available!
1136 Free entry cannot contain more then 80 characters
1170 Generate pins
1171 Create bearing
1172 Create security ring
1173 Generate flange
1174 Generate fitting
1175 Create pipe screw fitting
1176 Create pipes
1183 Create engine
1188 visible
1189 Section-type:
1190 Start letter:
1191 Section-type
1192 Select initial yourself
1193 Visibility being calculated
1194 Manual arrow tip
1195 Drawing management
1197 Tolerances
1198 ME-Objects
1207 Modify which V-belt pulley?
1208 Delete which V-belt pulley?
1226 Record too long
1269 No fits found
1270 No value for drill available
1271 No value for the shaft available
1276 Start point
1277 End Point
1288 Dummy number in use. Issue a new dummy number to component?
1289 Position number already exists for component. Issue a new position number to component?
1397 No parts indicated for screwing
1400 Clamp length bigger than max. screwlength!
1401 A codeword for\nMechanics Plant design is needed!
1402 A codeword for\nMechanics Mechanical Engineering is needed!
1403 A codeword for\nMechanics Bearings is needed!
1404 A codeword for\nMechanics Basic is needed!
1405 Codeword?
1407 3D colour
1410 Radius Inner/Outer circle
1411 Axis definition over 3 points
1412 Stripe strength
1413 Start radius
1414 Rotations
1415 Support points
1416 Assign attributes on selected model only
1417 Enter start point or circle
1420 Exact
1421 Preview
1422 ODBC - driver not configured!
1423 Please close active window first!
1424 %s found!\n
1425 %s not found!\n
1428 %s replaces norm %s.\n
1429 %s has no predecessor.\n
1431 %s was removed without replacement.\n
1432 %s was replaced with %s.\n
1433 %s has no successor.\n
1434 %s has no predecessor / successor.\n
1435 No searchtext entered!\n
1436 Error when selecting screwing
1437 Incorrect points for screwing!
1438 Take over parameters from wich ME-Object?
1442 Error while loading data!
1444 Change %s
1446 Construction element
1447 Standard part
1448 Create %s
1449 Position number
1452 No free floating-license for DIN standard parts!
1453 may not be modified!
1454 Screwing was created with older version!\n No change possible.
1455 Head washer
1456 Washer at nut
1457 Lock nut
1458 ATTENTION! Models for screwing have to be\nin the same working plane
1459 Drilling depth
1460 Drilling depth by 2 points
1461 NOTE: Codeword for\nDIN-package Basic necessary!
1462 free
1463 diameter will be changed according to standard!
1464 Points are on the same height
1465 Points have to be on the same height
1466 Error in the unfold module Rc=
1467 Invalid input data ..
1468 Internal error: Invalid parameters ..
1469 Initialisation error of unfold module.
1470 Internal error - Unfold module has been terminated.
1471 Syntax error in default file.. Cannot start!
1472 Default file not found.. Cannot start!
1473 Invalid type indicated!
1474 Invalid category indicated!
1475 Not yet implemented!
1476 Invalid code word!
1477 Invalid textfile (dialog.ra)!
1478 Error at spline: drawn as polygon!
1482 Category : %s Type: %s
1483 Sheet thickness = %.2lf mm
1484 %d divisions
1485 %d segments, connection lengths: %.2lf %.2lf
1486 %d segments
1488 Pipe unfold
1489 Pipe category
1490 Error, when copying parameters into the mask!
1492 Unfold
1494 Sink shape A,B,C,E
1496 Elbow
1497 Branch
1498 Reducer
1499 y-pipe
1500 Length of main pipe
1501 End feed diameter of branch
1502 Start feed diameter of branch
1503 Elbow radius
1504 da##ToolTip in GROUP dims in WINDOW unwind
1505 Diameter of right feed Y-pipe
1506 Diameter of left feed Y-pipe
1507 Pipe diameter
1508 Offset
1509 Top diameter
1510 Angle of left feed Y-pipe
1511 Angle of right feed Y-pipe
1512 Angle of elbow
1513 Branch height
1514 Length of branch
1515 Angle of branch
1516 central diameter
1517 Length of head feed
1518 Width of head feed
1519 Length of underside
1520 Width of underside
1521 Dimensioning
1522 Dimension Number
1523 Number of dimensions
1524 Sheet thickness
1525 Sheet thickness
1526 Circle-\nresolution
1527 Indicates the resolution of the circle
1528 Number of segments:
1529 Number of circle segments:
1530 Fillet radius:
1531 Fillet radius
1532 Offset:
1533 x:
1534 Offset in x-direction
1535 y:
1536 Offset in y-direction
1537 Rotation angle between base side and top side
1538 Offset of branch in y-direction
1539 Create pipe unfold
1540 cylindric branch
1541 conic branch
1542 cylindric double branch
1543 conic double branch
1544 Reducer round round
1545 Reducer round angular
1546 Reducer angular round
1547 Reducer angular angular
1548 Extension
1549 Ext. top
1550 Ext. bottom
1551 Angle of main pipe
1552 Parametric of objects will be lost, join anyhow?
1553 hidden
1554 Piping
1557 Help...
1559 Silhouette:
1560 Centre line:
1561 Hatch parameter name
1563 Hatch colour
1564 Standard:
1565 Series:
1566 Kind:
1567 Nominal diameter
1568 Outside diameter
1569 Wall thickness
1571 Height1
1572 Height2
1575 Flange outside diameter
1576 Flange sheet thickness
1577 Armature
1579 Kind of connection
1580 With external thread
1581 With welding end
1582 Double flange
1583 Flange on
1584 Wedged in flange
1586 With internal thread
1588 Pipe outside diameter
1589 Supplementary symbol
1590 Seam types
1591 Supplemental text
1592 Seam thickness
1593 Number of seams
1594 Seam length
1595 Distance between seams
1596 Supplemental text input
1597 Invalid welding symbol!
1598 Change which welding symbol?
1599 Delete which welding symbol?
1600 Align on line
1601 Labelling
1603 Angle
1604 Number of corners
1605 Labelling and symbols
1606 Gasket
1608 Define component
1609 Piping
1610 Create screwings
1611 Screwing on flange
1612 Change material
1613 Material associations for ME-Objects
1614 Associated materials
1615 Material already exists!
1616 No connection to ME - database!
1617 Material associations
1618 Processing ME-Objects
1619 ME-Objects updated
1620 External thread
1621 Convert ME-Objects
1622 Select position for external thread
1623 Model already contains an external thread!
1624 No appropriate diameter found!
1627 Thread diameter and clamp length over flange and opposite point
1628 Sink angle
1629 Outside diameter, wall thickness (0=none)?
1630 Length
1631 Steel flange
1632 Welding neck flange
1633 Sheet
1634 Name
1635 Comment
1636 Substance
1637 No correct unfold!
1638 Clamp length by 2 surfaces
1639 Not a valid edge tolerance!
1640 EDGE TOLERANCE
1641 Modify which edge tolerance?
1642 Delete which edge tolerance?
1643 (P)##edge tolerance
1644 (M)##edge tolerance
1645 (L)##edge tolerance
1646 (F)##edge tolerance
1647 (E)##edge tolerance
1648 CZ##edge tolerance
1649 LD##edge tolerance
1650 MD##edge tolerance
1651 PD##edge tolerance
1652 LE##edge tolerance
1653 NC##edge tolerance
1654 ACS##edge tolerance
1655 Additional tolerance symbols
1656 Edge tolerance
1657 Tear line?
1660 Number of elements
1662 x##multiply symbol
1663 Size of elements
1664 Tolerance of elements
1665 Single tear line or broken view
1666 Kind of tear line
1667 Tear line position?
1668 Broken views cannot be rotated!
1669 Break view
1670 Edit view break
1671 Remove view break
1672 Start of broken view?
1673 End of broken view?
1674 Neutral fibre
1675 Outside dimensions
1676 Main position number
1677 Sub position number
1678 Start at which position number?
1679 Reposition all parts
1680 Position parts without position number
1681 Maintain following position numbers:
1682 Select/deselect all
1683 Position properties
1685 Nr. from component ##abbreviation for Number (not enough space)
1686 ME-modul in Testmode! (max. 300 actions)
1687 Armature type selection
1688 Flange standard
1689 Flange kind
1690 Flange series
1691 Pipe start diameter
1692 Gasket start diameter
1693 Gasket start thickness
1694 Pipe/Fitting
1695 Fitting type selection
1696 Reducer
1697 Entry mode
1698 Leg length a
1699 Leg length b
1700 Flange type selection
1701 Smooth flange
1702 Screwing parameter name
1703 Selection list of screwing names
1704 Hole circle diameter
1705 Flange thickness
1706 Flange inner diameter
1707 Pipe start wall thickness
1708 Pipe start height
1709 Hole diameter
1710 Gasket type selection
1711 Inner diameter intermediate layer
1712 Gasket outer diameter
1713 Flat gasket (holes)
1714 Gasket inner diameter
1715 Outer diameter intermediate layer
1716 Diameter outer ring
1717 Gasket thickness
1718 Thickness outer/inner ring
1719 Pipe standard
1720 Pipe kind
1721 Pipe series
1722 Elbow standard
1723 Elbow kind
1724 Elbow series
1725 Cuboid
1726 Prism
1727 Chord length
1728 Alpha
1729 Beta
1730 Gamma
1731 Adjacent leg
1732 Opposite leg
1733 Hypothenuse
1734 Generation mode
1735 Cuboid//cube
1736 Triangle mode
1737 3 sides
1738 2 sides and enclosed angle
1739 1 side and 2 adjacent angles
1740 Normal to the work plane
1741 Normal to the surface
1743 Create stair
1744 Create railing
1745 Ra <>
1746 Rz <>
1747 Ra <>;Rz <>
1748 <> / Ra <>
1749 <> / Rz <>
1750 U Ra <>
1751 L Ra <>
1752 Ramax <>
1753 U Ra <>;L Ra <>
1754 <>
1755 Miter
1756 Coarse thread
1757 Fine thread
1758 Keep mirroring
1759 In the current working plane
1760 There are further identical positionings. Should all identical positionings be deleted?
1762 Railing
1763 Seltected position number
1764 Draw and arrange the position numbers of all components in the view.
1765 Search for the next number, that is not assigned to a component.
1766 Draw a position number only.
1767 Arrange position numbers horizontally.
1768 Arrange position numbers vertically.
1769 Insert a range of free position numbers and increase the assigned position numbers.
1770 Select and delete a position number.
1771 Next position number
1772 Position number ranges
1773 Show all with the specified position numbers
1774 Show all with an assigned position number
1775 Show all without an assigned position numbers
1776 Show all without a position number
1777 Thread kind
1778 Boundary
1779 Shaft diameter
1780 Material name or material number
1781 Feather key groove
1782 Simplified representation
1783 Horizontal distance between the drills
1784 Vertical distance between the drills
1785 Distance between the drills
1786 Inner diameter
1787 Draw centerlines
1788 Countersink diameter
1789 Countersink depth
1790 Sign of tolerance
1791 Selection of the tolerance value
1792 Free tolerance value
1793 Valency
1794 Rroughness level or Roughness value
1795 Information on the manufacturing process, surface treatment or coating
1796 Format for displaying the roughness value and the surface condition
1797 Roughness value or roughness depth
1798 Groove direction
1799 Parentheses for group information
1800 Thread depth
1801 Core hole depth
1802 Specify core hole depth / Automatic calculation based on the standard formula.
1803 Hidden representation
1804 Edge length
1805 Inner diameter
1806 Initial diameter
1807 Final diameter
1808 Dimensioning
1809 Error: %s has to be greater than or equal to 2x %s.
1810 Error: %s has to be greater than %s.
1811 Error: %s has to be greater than or equal to %s.
1812 Error: Has to be greater than 0.
1813 Error: %s has to be greater than %s + %s.
1814 Error: Upper left corner fillet collides with or passing through the screw.
1815 Error: %s - %s has to be greater than 0.
1816 Error: %s * sin(%s/2) has to be greater than %s. %s is equal to 2*Pi/%s.
1817 Error: %s - %s has to be greater than %s.
1818 Left side view
1819 Right side view
1820 Ground view
1821 Rim outside diameter
1822 Straightening diameter
1823 Groove depth
1824 Hub diameter
1825 Rim inside diameter
1826 Feather key groove
1827 V-belt pulley with drill
1828 V-belt pulley with drill and feather key groove according to standard
1829 Groove width
1830 Profile width
1831 Hub overhang
1832 Web width
1833 Reducer round
1834 Reducer angular
1835 Reducer top
1836 Reducer bottom
1837 Cylindric branch
1838 Conic branch
1839 Spring ring or head washer
1840 Spring ring or washer at nut
1842 Wrench size
1843 Section symbol
1845 Error: Upper right corner fillet collides with or passing through the screw.
1846 Error: Lower left corner fillet collides with or passing through the screw.
1847 Error: Lower right corner fillet collides with or passing through the screw.
1848 Same radii
1849 All 4 corners having the same radius.
1850 Ring
1851 Pipe thread
1852 Free screw length
1853 Objects with attribute
1854 Existing position numbers
1855 Assigned position numbers
1856 Re-issue
1857 Flange motor
1858 Flange motor L Fl.
1859 Flange motor S Fl.
1860 Foot motor
1861 Core diameter
1862 kW## Kilowatt
1863 V## Volt
1864 Hz## Hertz
1865 rpm##Revolutions per minute
1866 coarse
1867 Series1-Socket wrench
1868 Series2-Spanner
1869 Series3-Countersink
1870 Hexagon screws
1871 Socket screws and countersunk screws
1872 Drilled disc with centre bore
1873 Error: Has to be greater or equal to 0.
1874 Error: %s has to be greater than 2x %s.
1875 Error: %s has to be smaller than 2x %s.
1876 Error: %s is too big.
1877 Error: %s is too small.
1878 Error: %s has to be divisible by %s.
1879 Thread
